STAS 8055 1-1980 CARTRIDGE FUSE-LINKS FOR MINIATURE FUSES General technical requirements for quality《微型保险丝管状熔断体 通用质量技术要求 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 6929-1994 数控铣床用二齿削平型直柄球头立铣刀.d=6～28mm.pdf

HB 6930-1994 数控铣床用四齿削平型直柄球头立铣刀.d=10～12mm.pdf

HB 6931-1994 数控铣床用六齿削平型直柄球头立铣刀.d=32～63mm.pdf

HB 6932-1994 数控铣床用二齿莫氏锥柄球头立铣刀.d=10～28mm.pdf

HB 6933-1994 数控铣床用四齿莫氏锥柄球头立铣刀.d=10～63mm.pdf

HB 6934-1994 数控铣床用六齿莫氏锥柄球头立铣刀.d=32～63mm.pdf

HB 6936-1994 二齿球头立铣刀用槽铣刀.用于HB 6929-94 HB 6932-94.D=40～63mm.pdf

HB 6937-1994 二齿球头立铣刀槽铣刀用样板和校对样板.检测HB 6936-94槽铣刀用.pdf

HB 6938-1994 二齿球头立铣刀用偏背刀.用HB 6929-94 HB 6932-94.D=56～63mm.pdf