STAS 9681-1980 Aircraft SUPPORTING POINTS AND CLEARANCE DIMENSIONS FOR TRIPOD JACK Dimensions《飞机 三脚架插座用的支点和间隙尺寸 尺寸 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 149-1974 圆板牙技术条件.pdf

QJ 150-1974 滚丝轮型式与尺寸 内孔直径45mm.pdf

QJ 151-1974 滚丝轮型式与尺寸(内孔直径φ54mm).pdf

QJ 152-1974 滚丝轮技术条件.pdf

QJ 153-1974 搓丝板型式与尺寸.pdf

QJ 154-1974 搓丝板技术条件.pdf

QJ 160-1974 普通螺纹量规螺纹型面尺寸及公差.pdf

QJ 161-1974 螺纹量规技术条件.pdf

QJ 162-1974 镀前螺纹环规基本尺寸.pdf