STAS 318 6-1988 SPECIAL GLASS Aluminium trioxide content deter- mination《特制玻璃 三氧化二铝含量测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 7539-2-1994 Corrosion of metals and alloys Stress corrosion testing Part 2 Preparation and use of bent-beam specimens《金属和合金的腐蚀 应力腐蚀试验 第2部分：弯梁试样的制备和应用》.pdf

STAS SR ISO 7539-3-1994 Corrosion of metals and ailoys Stress corrosion testing Part 3 Preparation and use of U-bend specimens《金属和合金的腐蚀 应力腐蚀试验 第3部分：U形弯头试样的制备和应用》.pdf

STAS SR ISO 7539-4-1993 Corrosion of metals and alloys Stress corrosion testing Part 4 Preparation and use of uniaxially loaded tension specimens《金属和合金的腐蚀 应力腐蚀试验 第4部分：轴向载荷拉伸试样的制备和使.pdf

STAS SR ISO 7547-1995 Air-conditioning and ventilation of accomodation spaces on board ships - Design conditions and basis of calculations《船上空调和起居仓的通风设备 设计条件和计算基础 》.pdf

STAS SR ISO 7571-1995 Woodworking machines - Surface planing machines with cutterblock for one-side dressing - Nomenclature and acceptance conditions《单面刨光用带组合铣刀的平面刨床 专用术语和验收条件 》.pdf

STAS SR ISO 7583-1995 Anodizing of aluminium and its alloys Vocabulary《铝及铝合金阳极氧化 词汇表 》.pdf

STAS SR ISO 7588-1996 Road vehicles - Relays and flashers - Mounting and positioning dimensions of male tabs and socket apertures for relays and flaschers《道路车辆 继电器和闪光器 及其凸接触件和插座孔的安.pdf

STAS SR ISO 7590-1995 Steel cord conveyor belts - Cover thickness measurement《钢丝绳芯输送带覆盖层厚度的测定 》.pdf

STAS SR ISO 7609-1996 Essential oils - Analysis by gas chromatography on capillary columns - General method《精油 毛细血管柱的气象色谱分析 一般方法 》.pdf