STAS 4173 1-1991 LOW VOI.TAGE FUSF.S General requirements《低压保险丝 通用要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 9179.6-1999 水压机上自由锻件机械加工余量与公差 模块类.pdf

JB T 9179.6-2013 液压机上钢质自由锻件机械加工余量与公差第6 部分：模块类.pdf

JB T 9179.7-1999 水压机上自由锻件机械加工余量与公差 简体类.pdf

JB T 9179.7-2013 液压机上钢质自由锻件机械加工余量与公差第7 部分：筒体类.pdf

JB T 9179.8-1999 水压机上自由锻件机械加工余量与公差 圆环类.pdf

JB T 9179.8-2013 液压机上钢质自由锻件机械加工余量与公差第8 部分：圆环、筒节和法兰类.pdf

JB T 9180.1-1999 钢质冷挤压件 公差.pdf

JB T 9180.1-2014 钢质冷挤压件 第1部分：公差.pdf

JB T 9180.2-1999 钢质冷挤压件 通用技术条件.pdf