AC-25.735-1-1994 《刹车磨损限制要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 7357-1990 RUBBER Rubber viscosity determination by shcaring disk viscosimeter《橡胶 用剪切圆盘式黏度计测定橡胶黏性 》.pdf

STAS 7358-1991 Hydraulic flexible brake hose for road vehicles general technical requirements for quality《道路车辆用的液压柔性软管 一般质量技术要求 》.pdf

STAS 7359-1989 Varnishes and paints PAINTS BASED ON POLYVI- NYLACETATE AQUEOUSDIS- PERT1DNS《清漆和涂料 成分主要是醋酸盐乙烯聚合物的涂料 》.pdf

STAS 7360-1981 MAN-MADE YARNS Rules for quality checking《人造纱线 质量检测规则 》.pdf

STAS 7361-1980 POLYVINYL CHLORIDE MAT AND FLOOR TILES《聚氯乙烯衬垫和地板砖 》.pdf

STAS 7363-1986 CAST IRON RADIATOR ELEMENTS WITH JOINT COLUMNS OF ELIPTICAL SECTION Dimensions《有椭圆形柱接头的铸铁散热器部件 尺寸 》.pdf

STAS 7364-1986 CAST IRON RADIATOR ELEMENTS WITH FREE COLUMNS OF CIR- CULAR SEGTION Dimensions《有圆弧形截面的铸铁散热器零件尺寸 》.pdf

STAS 7365-1974 METAL WELDING Fundamental welding positlons《金属焊接 焊接基础点位 》.pdf

STAS 7366-1980 GEAR HOBBING MACHINES Basic parameters《滚齿机 基本参数 》.pdf