1、AECMA STANDARD NORME AECMA AECMA NORM prEN 31 55-044 Edition P 1 August 1996 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES (AECMA) Gulledelle 94 - B-1200 BRUXELLES - Tel. (32) 2 775 81 10 - Fax. (32) 2 775 81 11 ICs : 49.060 Descriptors : Aerospace industry, aerospace equipment, elem
2、ent of electrical connection, electrical contact, characteristic, test, quality assurance, marking ENGLISH VERSION Aerospace series Electrical contacts used in elements of connection Part 044 : Contacts, electrical, male 044, type A, double crimping, class T Product standard Srie arospatiale Luft- u
3、nd Raumfahrt Contacts lectriques utiliss dans les organes de connexion Partie O44 : Contacts lectriques, mles 044, type A, double sertissage, classe T Elektrische Kontakte zur Verwendung in Verbindungselementen Teil O44 : Elektrischer Stiftkontakt 044, Typ A, doppelt gecrimpt, Klasse T Norme de prod
4、uit Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Commit
5、tee following comment by the Member countries. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re- identification of the standard. After examination and signature of th
6、e AECMA Standard Checking Centre (NPS) and formal agreement of the Official Services of the Member countries it will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote. I Nata Extra copies can be supplied by B.N.A.E. - Technopoiis 54 - 199, rue
7、Jean-Jacques Rousseau - 921 38 ISSY-LES-MOULINEAUX CEDEX Comments should be sent within six months after the date of publication to I Edition approved for publication I 1996-08-30 AECMA Gulledelle 94 B-1200 BRUXELLES C2 Chairman Mr Peztetta aecma 1996 Copyright Association Europeene des Constructeur
8、s de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD-AECMA PREN 3155-0VV-ENGL L99b = 1012311 0021703 Tb8 H Pievious page is blank Page 3 prEN 31 55-044 : 1996 1 Scope This standard specifies the requi
9、red characteristics and tests applicable to electrical contacts, male 044, type A, double crimping, class T, used in elements of connection according to EN 31 55-002. It shall be used together with EN 31 55-001. The associated female contact is defined in EN 31 55-045. 2 Normative references This Eu
10、ropean Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publication
11、s apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 2083 EN 2591 EN 3155-001 EN 3155-002 EN 31 55-045 MIL-C-22520/1 MIL-I-81969/8 MIL-I-81969/14 MIL-I-81969/30 Copper and copper
12、alloy conductors for electrical cables - Aerospace series 1 Aerospace series - Elements of electrical and optical connection - Test methods - General Aerospace series - Electrical contacts used in elements of connection - Part O01 : Technical specification 2, Aerospace series - Electrical contracts
13、used in elements of connection - Part 002 : List and utilization of contacts 2, Aerospace series - Electrical contacts used in elements of connection - Part 045 : Contacts, electrical, female 045, type A, double crimping, class T - Product standard 2, Crimping tools, terminal, hand, wire termination
14、 for wire barrel sizes 12 through 20 3, Installing and removal tools, connector electrical contact, types I and II, class 2, composition A 3, Installing and removal tools, connector electrical contact, type III, class 2, composition B 3, Installing and removal tools, connector electrical contact, ty
15、pe II, class 2, composition C, for unwired contacts 3, 3 Definitions For the purposes of this standard, the following definitions apply : See EN 31 55-001. * 1) Published as AECMA Standard at the date of publication of this standard 2) Published as AECMA Prestandard at the date of publication of thi
16、s standard 3) Published by : Department of Defense (DODI, the Pentagon, Washington D.C. 20301 USA. And all its parts quoted in table 5 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitt
17、ed without license from IHS-,-,-Page 4 prEN 31 55-044 : 1996 Size Contact Barrel 20 22 4 Required characteristics 4.1 Dimensions, mass Dimensions are in millimetres. See figure 1 and table 1. B C D E F G Hl HZ 13,94 4,34 3,30 0,84 1,98 1,04 0,89 1,34 13,79 4,06 3,17 0,74 1,93 0,99 0,84 1,29 A max. 1
18、8,29 d (one side only) Size Contact Barrel 20 22 47“ x Mass g 0,27 J K L Mi M2 N P S 1,98 2,62 1,74 3,35 0,45 1,73 0,81 0,51 1.93 2.54 1.69 3.06 0.15 1,35 0,66 0,13 I Manufacturer identification a U Oetail of barrel Figure 1 Table 1 4.2 Material, protective plating Body material : copper alloy Prote
19、ctive plating : selective protection not permitted ; minimum gold thickness : 1,27 pm nickel undercoat Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
20、Page 5 prEN 3155-044 : 1996 Size Contact Barrel 20 22 Size of conductors Rated test current AWG 1, insulation 4 AECMA Section mm2 A Code 004 0,4 22 1,25 5 max. Size Contact Barrel 20 22 4.4 Tooling Conform to MIL-C-22520 and MIL-1-81 969. See table 4. Table 4 Stripped length of cable mm +_ 0,3 2,3 S
21、ize Contact Barrel 22 20 Cable size Crimping tool Extraction tools Insertion AECMA AWG Tool Positioner seector tool Wired contact Unwired contact number Code 004 22 M22520/1-01 M22520/1-02 4 MIL-I-81969/14-11 MIL-1-81 969/14-11 MIL-1-81 969/30-O5 red (continued) t Applicable Not applicable According
22、 to Details EN 3155-001 EN 2591- Title O1 Visual examination X 102 Examination of dimensions X 201 Contact resistance - Low X 202 Contact resistance at rated X 204 Discontinuity of contacts in X and mass level current the microsecond range I Copyright Association Europeene des Constructeurs de Mater
23、iel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I Measurement of insulation X resistance _ Tensile strength (crimped I Voltage proof test Electrical overload X X Surface transfer impedance Shielding effectiven
24、ess from 100 MHz to 1 GHz X X Rapid change of temperature Mould growth X X Salt mist Fluid resistance Shock X X X Sinusoidal and random vi brations Mechanical endurance X X Contact deformation after crimping Mesurement of thickness of coating on contacts Adhesion of coating on contacts X X X Page 6
25、prEN 31 55-044 : 1996 Table 5 (concluded) Applicable Details Not applicable According to EN 3155-001 EN 2591- Title 206 207 210 21 1 Capacitance measurement I x I I 30 1 I Endurance at temperature Ix T = (260 f 2) OC Duration : 1 O00 h TA = (- 65 f 2) OC TB = (260 I 2) OC 305 306 307 31 5 402 406 41
26、 5 IxI Test probe damage (female contact) 41 6 Contact bending strength I I X I X I Crimping on sheath, 41 7 connection) 1 I Gauge insertion and extraction forces in and out of a female contact Restricted entry inoperative 41 8 502 503 508 509 51 3 Mannetic Dermeabilitv I I X II 2 Copyright Associat
27、ion Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD-AECMA PREN 3155-044-ENGL 199b LOI12311 0011707 bO3 9 Description block CONTACT, ELECTRICAL Page 7 prEN 31 55-044 : 19
28、96 Identity block EN31 55-044M20i 5 Designation EXAMPLE : 2- Number of this standard Type of contact M = male Contact size code (see table 1) Barrel size code (see table 1) NOTE : If necessary, the code 19005 shall be placed between the description block and the identity block. 6 Marking See EN 31 55-001. 7 Technical specification See EN 31 55-001. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
