AIA NAS 1725-2002 Fastner Shear 100 Degree Standard Flush Head Tapered Shank (TS) Oversize 95 KSI Fsu 108 KSI Fsu 110 KSI Fsu 125 KSI Fsu 132 KSI Fsu and 156 KSI Fsu FSC 5320 Rev 2.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 2190-1975 导柱.pdf

HB 2413-1977 HB 243-70 CG螺纹塞规及螺纹分组塞规应用尺寸 d＝5-30mm.pdf

HB 2436-1979 镶硬质合金刀齿的两面刃和三面刃铣刀用楔.pdf

HB 2437-1979 铣刀用螺旋硬质合金刀片D=10~125mm.pdf

HB 2447-1979 样板及校对样板 检验HB2446-79槽铣刀用.pdf

HB 2448-1979 铣镶片铣刀5°槽用槽铣刀D=100～125mm.pdf

HB 2487-1977 导筒.pdf

HB 2498-1989 v型压管器.pdf

HB 2513-1989 t形支座.pdf