AIA NAS 216-1947 (Inactive)Screws - 100 Degree Flat Head Frearson Recess Alum Alloy Bronze and Alloy Steel 3 8-24 Superseded - November 1947 (Use AN509) (Rev 3).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 7743+A1-1995 Vulcanized or thermoplastic-rubber Determination of compression stress-strain properties 《硫化或热塑性橡胶测定压缩应力应变特性 》.pdf

STAS SR ISO 7744 Hydraulic fluid power — Filters — Statement of requirements《液压流体动力 过滤器 要求的生命》.pdf

STAS SR ISO 7751-1995 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure《橡胶、塑料软管和软管组合件试验压力、爆破压力与设计工作压力的比率 》.pdf

STAS SR ISO 7764 Iron ores - Preparation of predried test samples for chemical analysis《铁矿石 化学分析的测试样品预干燥的准备 》.pdf

STAS SR ISO 7765-1-1995 Plastics film and sheeting - Determination of impact resistance by the free-faliing dart method - Part 1 Staircase methods《塑料薄膜及片材 用自由落镖法测定冲击阻力 第1部分：梯级法 》.pdf

STAS SR ISO 7771-1996 Textiles - Determination of dimensional changes of fabrics induced by cold-water immersion《纺织物 冷水浸泡引起纺织物尺寸变化的测定 》.pdf

STAS SR ISO 7801-1993 Metallic materials Wire Reverse bend test《金属材料 线 反向弯曲试验 》.pdf

STAS SR ISO 7803-1995 Commercial road vehicles - Steering ball joints《商用道路车辆 钢球连接 》.pdf

STAS SR ISO 7807-1995 Air distribution - Straight circular sheet metal ducts with a lock type spiral seam and straight rectangular sheet metal ducts - Dimensions《空气配给 有锁紧型螺旋缝焊的圆形薄金.pdf