AIA NAS 978-1983 Numerically Controlled Machining Center (Combination Drilling Boring Milling and Tapping Machines) (Rev 3).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 1295-1987 战术导弹触发引信通用技术条件.pdf

QJ 13-1985 设计文件的分类编号.pdf

QJ 1302-1987 设计评审规范.pdf

QJ 1306-1987 卫星回收系统设计规范.pdf

QJ 1307-1987 卫星、导弹和火箭回收系统研制程序.pdf

QJ 1309-1990 ZL104铸件分散状疏松的分级.pdf

QJ 1310-1987 地-地导弹飞行试验外弹道测量要求及其制订原则.pdf

QJ 1310A-1996 地地导弹飞行试验外弹道测量要求及其制定原则.pdf

QJ 1317-1987 电子元器件失效分类及代码.pdf