AIA NASM124746-1998 Insert Cres Helical Coil Fine Thread 2 Dia Nominal Length FSC 5325.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 3326-1980 镶硬质合金刀片的浮动镗刀D=30~35mm.pdf

HB 3327-1980 镶硬质合金刀片的浮动镗刀D=38~45mm.pdf

HB 3328-1980 镶硬质合金刀片的浮动镗刀D=48.50mm.pdf

HB 3329-1980 镶硬质合金刀片的浮动镗刀D=52~58mm.pdf

HB 3330-1980 镶硬质合金刀片的浮动镗刀D=60.65mm.pdf

HB 3331-1980 镶硬质合金刀片的浮动镗刀D=70~80mm.pdf

HB 3332-1980 镶硬质合金刀片的浮动镗刀片 D=30~60mm.pdf

HB 3333-1980 镶硬质合金刀片的浮动镗刀片 D=65~80mm.pdf

HB 3334-1980 浮动镗刀片用硬质合金刀片.pdf