1、A-A-50169B 26-October-2011 SUPERSEDING A-A-50169A 19 August 2005 COMMERCIAL ITEM DESCRIPTION SKIN PROTECTIVE COMPOUNDS, CHEMICAL BARRIER The General Services Administration has authorized the use of this commercial item description for all federal agencies. 1. CLASSIFICATION. 1.1 ClassificationType
2、I - Water dispersible compound (for protection against staining and adhering compounds). . This commercial item description covers skin protective compounds of the following three types. None of these compounds are intended to provide protection against chemical or biological warfare agents: Type II
3、 - Water miscible compound (for protection against hydrocarbons, oils, solvents, etc.). Type III - Water insoluble compound (for protection against dilute acids, alkalies, and other water miscible chemicals). AMSC N/A FSC 6850 DISTRIBUTION STATEMENT A. Approved for public release; distribution is un
4、limited. METRIC Comments, suggestions, or questions on this document should be addressed to AFPA/PTPT, 2430 C Street, Bldg 70, Area B, Wright-Patterson AFB OH 45433-7632 or e-mailed to AFPET.AFTTwpafb.af.mil. Since contact information can change, you may want to verify the currency of this address i
5、nformation using the ASSIST Online database at https:/assist.daps.dla.mil . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50169B 2 2. SALIENT CHARACTERISTICS. 2.1 Composition2.2 . The skin protective compounds shall be made from ingredients con
6、forming to the standards set forth by the Federal Food, Drug, and Cosmetic Act and the Occupational Safety and Health Administration regulations. All ingredients known for their ability to penetrate the skin surface and be absorbed by the metabolically active (live) parts of the skin or other live t
7、issues shall be excluded from the skin protective compounds formulations. All compounds shall be homogenous, soft in texture, free from grit, and readily removable from the skin with soap and water, without the need of a brush or cloth. The compounds shall be stable to storage conditions from minus
8、51C (-60F) (slow freezing) to plus 52C (125F). The compounds shall present no objectionable odor either during or after application to the skin. Protection and application2.3 . The compounds shall protect the skin from injury when exposed to the materials cited in 1.1 for each type of compound. The
9、compounds shall be readily applicable to the skin at temperatures ranging from 4C (40F) to 38C (100F) and shall form a flexible adhering film which shall not be sticky, stiff, or greasy. Standards compliance2.4 . The pH value shall be between 6.0 and 8.5 when a 5 gram sample of the compound is heate
10、d to boiling with 45 mL of boiled distilled water, allowed to cool to room temperature, and tested in accordance with ASTM E70. Labeling3. PRODUCT CONFORMANCE PROVISIONS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 2
11、3.403 of the Federal Acquisition Regulation (FAR). . Each container of skin protective compound shall be labeled to conform to the regulations of the Federal Food, Drug, and Cosmetic Act. The label shall be printed clearly and shall include the nomenclature and type, warning, usage, and removal dire
12、ctions. 3.1 Certification4. PACKAGING. . The contractor shall certify that the product offered meets salient characteristics of this description, conforms to the producers own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commer
13、cial marketplace. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4.1 Packaging4.2 . Protective skin creams shall be packaged in 1-pound plastic jars with re-closable
14、lids or in 8-ounce plastic tubes with threaded caps. Packing4.3 . Twelve pounds of protective skin cream, packaged as specified, shall be packed in a snug-fitting RSC style (RSC/0201) corrugated fiberboard shipping container conforming to type CF, class domestic, grade 200 of ASTM D5118/D5118M. Crea
15、ms packaged in tubes shall have shipping containers with partitions that provide individual snug-fitting compartments for each tube. Each shipping container shall be completely filled with no voids and of a size that can be palletized in accordance with MIL-STD-147. Each shipping container shall be
16、closed in accordance with ASTM D1974/D1974M. Palletization4.4 . When required (see 5.2), protective skin cream, packed as specified, shall be palletized on a 4-way entry pallet in accordance with load Type Ia of MIL-STD-147. Each prepared load shall be bonded by methods D, F, or G, in accordance wit
17、h MIL-STD-147. Marking. In addition to any special markings required by the contract or purchase order, shipping containers and palletized loads shall be marked in accordance with MIL-STD-129. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50169
18、B 3 5. NOTES. 5.1 Intended use5.2 . The skin protective compounds are intended for use on human skin to assist in protecting the user against injury from contact with acids, solvents, oils, and other chemicals. Ordering dataa. Title, number, and date of this document. . b. Type of skin compound requ
19、ired (see 1.1). c. Size container required (see 4.1). d. When palletization is required (see 4.3). 5.3 Sources for government documentsMIL-STD-147 Palletized Unit Loads . MIL-STD-129 Military Marking for Shipment and Storage (Copies of military standards, specifications, and handbooks may be obtaine
20、d online at https:/assist.daps.dla.mil/quicksearch or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia PA 19111-5094). 5.4 Sources for nongovernment associations documentsASTM D1974/D1974M Standard Practice for Methods of Closing, Sealing, and Reinforcing F
21、iberboard Boxes . ASTM D5118/D5118M Standard Practice for Fabrication of Fiberboard Shipping Boxes ASTM E70 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode (ASTM standards are available online at http:/www.astm.org or from ASTM International, 100 Barr Harbor Drive, PO Box C
22、700, West Conshohocken PA 19428-2959). 5.5 Source for laws and regulationsFederal Acquisition Regulations. . (Copies of the Federal Acquisition Regulations may be obtained online at https:/www.acquisition.gov/far/). Federal Food, Drug, and Cosmetic Act, and regulations promulgated thereafter. (Copie
23、s of these documents are available online at http:/www.fda.gov or may be obtained from the Food and Drug Administration, 10903 New Hampshire Ave, Silver Springs, MD 20993). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50169B 4 5.6 Key WordsAlk
24、alies . Cream Water dispersible compound Water miscible compound CONCLUDING MATERIAL Custodians: Preparing Activity: Army - GL Air Force - 68 Navy AS (Project 6850-2011-007) Air Force - 68 DLA GS Review Activities: Army MD Navy MC Note: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
