ANSI AWS D1.7 D1.7M-2010 Guide for Strengthening and Repairing Existing Structures.pdf

上传人:medalangle361 文档编号:433861 上传时间:2018-11-11 格式:PDF 页数:54 大小:330.12KB
下载 相关 举报
ANSI AWS D1.7 D1.7M-2010 Guide for Strengthening and Repairing Existing Structures.pdf_第1页
第1页 / 共54页
ANSI AWS D1.7 D1.7M-2010 Guide for Strengthening and Repairing Existing Structures.pdf_第2页
第2页 / 共54页
ANSI AWS D1.7 D1.7M-2010 Guide for Strengthening and Repairing Existing Structures.pdf_第3页
第3页 / 共54页
ANSI AWS D1.7 D1.7M-2010 Guide for Strengthening and Repairing Existing Structures.pdf_第4页
第4页 / 共54页
ANSI AWS D1.7 D1.7M-2010 Guide for Strengthening and Repairing Existing Structures.pdf_第5页
第5页 / 共54页
点击查看更多>>
资源描述

1、Guide forStrengthening andRepairing ExistingStructuresAWS D1.7/D1.7M:2010An American National Standard550 N.W. LeJeune Road, Miami, FL 33126AWS D1.7/D1.7M:2010An American National StandardApproved by theAmerican National Standards InstituteJuly 1, 2009Guide for Strengthening andRepairing Existing St

2、ructures1st EditionPrepared by theAmerican Welding Society (AWS) D1 Structural Welding CommitteeUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis guide provides information on strengthening and repairing existing structures. Included are se

3、ctions on weldability,evaluation of existing welds, testing and sampling, heat straightening, and damage repair.iiAWS D1.7/D1.7M:2010International Standard Book Number: 978-0-87171-761-0American Welding Society550 N.W. LeJeune Road, Miami, FL 33126 2009 by American Welding SocietyAll rights reserved

4、Printed in the United States of AmericaPhotocopy Rights. No portion of this standard may be reproduced, stored in a retrieval system, or transmitted in anyform, including mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyrightowner.Authorization to ph

5、otocopy items for internal, personal, or educational classroom use only or the internal, personal, oreducational classroom use only of specific clients is granted by the American Welding Society provided that the appropriatefee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers,

6、MA 01923, tel: (978) 750-8400; Internet:.iiiAWS D1.7/D1.7M:2010Statement on the Use of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have

7、 been developed in accordance with the rules of theAmerican National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, ormade part of, documents that are included in federal or state laws and regulations, or the regulations of other govern-mental bodies, th

8、eir provisions carry the full legal authority of the statute. In such cases, any changes in those AWSstandards must be approved by the governmental body having statutory jurisdiction before they can become a part ofthose laws and regulations. In all cases, these standards carry the full legal author

9、ity of the contract or other documentthat invokes the AWS standards. Where this contractual relationship exists, changes in or deviations from requirementsof an AWS standard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standar

10、ds development process that bringstogether volunteers representing varied viewpoints and interests to achieve consensus. While the AWS administers theprocess and establishes rules to promote fairness in the development of consensus, it does not independently test, evalu-ate, or verify the accuracy o

11、f any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whetherspecial, indirect, consequential, or compensatory, directly or indirectly resulting from the publication,

12、 use of, or relianceon this standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any informationpublished herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for oron behalf of any person or enti

13、ty, nor is AWS undertaking to perform any duty owed by any person or entity to someoneelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek theadvice of a competent professional in determining the exercise of reasonable care in any given circu

14、mstances. It isassumed that the use of this standard and its provisions are entrusted to appropriately qualified and competent personnel.This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.Publication of this standard does not author

15、ize infringement of any patent or trade name. Users of this standard acceptany and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement ofany patent or product trade name resulting from the use of this standard.Finally, the AWS does not mon

16、itor, police, or enforce compliance with this standard, nor does it have the power to do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are postedon the AWS web page (www.aws.org).Official interpretations of any of the technical r

17、equirements of this standard may only be obtained by sending a request,in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society,Attention: Managing Director, Technical Services Division, 550 N.W. LeJeune Road, Miami, FL 33126 (see Annex B)

18、.With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered.These opinions are offered solely as a convenience to users of this standard, and they do not constitute professionaladvice. Such opinions represent only the personal opinions of the par

19、ticular individuals giving them. These individualsdo not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations ofAWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard

20、 is subject to revision at any time by the AWS D1 Committee on Structural Welding. It must be reviewedevery five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions,or deletions) and any pertinent data that may be of use in improving this standa

21、rd are required and should be addressedto AWS Headquarters. Such comments will receive careful consideration by the AWS D1 Committee on StructuralWelding and the author of the comments will be informed of the Committees response to the comments. Guests areinvited to attend all meetings of the AWS D1

22、 Committee on Structural Welding to express their comments verbally.Procedures for appeal of an adverse decision concerning all such comments are provided in the Rules of Operation ofthe Technical Activities Committee. A copy of these Rules can be obtained from the American Welding Society, 550N.W.

23、LeJeune Road, Miami, FL 33126.This page is intentionally blank.ivAWS D1.7/D1.7M:2010vAWS D1.7/D1.7M:2010Personnel*DeceasedAWS D1 Committee on Structural WeldingD. K. Miller, Chair The Lincoln Electric CompanyA. W. Sindel, 1st Vice Chair Alstom Power, IncorporatedT. L. Niemann, 2nd Vice Chair Minneso

24、ta Department of TransportationS. Morales, Secretary American Welding SocietyN. J. Altebrando STV, IncorporatedF. G. Armao The Lincoln Electric CompanyE. L. Bickford Acute Technological Services*F. C. Breismeister Strocal, IncorporatedB. M. Butler Walt Disney World CompanyH. H. Campbell III Loadmast

25、er Universal RigsL. E. Collins Team Industries, IncorporatedR. B. Corbit Exelon Nuclear CorporationR. A. Dennis ConsultantM. A. Grieco Massachusetts Highway DepartmentC. R. Hess High Steel Structures, Incorporated (Retired)C. W. Holmes Modjeski and Masters, IncorporatedJ. J. Kenney Shell Internation

26、al E telephone (305) 443-9353; fax (305) 443-5951; e-mailinfoaws.org; or via the AWS web site .This page is intentionally blank.viiiAWS D1.7/D1.7M:2010ixAWS D1.7/D1.7M:2010Table of ContentsPage No.Personnel vForeword.viiList of Tables.x1. General Provisions 11.1 Scope11.2 Limitations.11.3 Approval 2

27、1.4 Safety Precautions .21.5 Standard Units of Measure 22. Normative References .23. Terms and Definitions .24. Weldability .34.1 Scope34.2 Introduction34.3 Structural Metals44.4 Weldability Based on Steel Composition 64.5 Welding Procedures and Techniques .114.6 Weldability Testing125. Evaluation o

28、f Existing Welds145.1 Scope145.2 Strength Evaluation .156. Testing and Sampling246.1 General Considerations246.2 Sampling and Testing Plan 246.3 NDT Methods for Flaw Detection.256.4 NDT Methods for Material Identification .276.5 NDT Methods for Flaw Sizing and Characterization 276.6 NDT Methods to D

29、etermine Existing Stress Levels276.7 NDT Methods to Determine Corrosion Effects.276.8 NDT Personnel Certification .287. Heat Straightening 297.1 Evaluating Damaged Structural Steel297.2 Restraining Forces .297.3 Heat Application298. Strengthening and Damage Repair318.1 Scope318.2 Possible Causes of

30、Damage.318.3 Written Repair Procedures.328.4 Methods of Repair .338.5 General Repair Considerations33Annex A (Informative)Informative References35Annex B (Informative)Guidelines for the Preparation of Technical Inquiries for the StructuralAnnex B (Informative)Welding Committee .39List of AWS Documen

31、ts on Structural Welding.41xAWS D1.7/D1.7M:2010List of TablesTable Page No.5.1 Fillet Weld Sizes 235.2 AWS D1.1, Figure 5.4 Convexity Limitations.237.1 Temperature Limits for Heat Application307.2 Torch Tip Guide .30AWS D1.7/D1.7M:201011. General Provisions1.1 Scope. This document contains basic inf

32、ormation pertinent to the welded strengthening and repair of existing steelstructures. The information contained in this guide is intended for both Engineers and Contractors with the purpose ofproviding direction and guidance to perform weld repairs, weld strengthening, and other weld procedures to

33、correctproblematic issues with existing structures. This guide contains background information that will be useful to the Engineerwho is obligated under AWS D1.1/D1.1M:2008 Clause 8 to provide a comprehensive plan to address projects thatinvolve strengthening and repairing of steel structures. The a

34、pproach to the strengthening and repairing of these materi-als is to be developed using the information provided herein.This guide is intended to apply to the strengthening and repair of existing structures made of the following materials:(1) Steel with a minimum specified yield strength of 100 ksi

35、690 MPa or less(2) Cast iron(3) Wrought ironStrengthening or repairing an existing structure includes modifications to meet new serviceability or load requirementsas well as corrections made to repair conditions unsuitable for future use specified by the Engineer. The Engineer shouldprepare a contra

36、ct for the work including, but not limited to, design, workmanship, inspection, acceptance criteria, anddocumentation. Except as modified in this clause, provisions of this guide should apply to the strengthening and repair ofexisting structures, including heat straightening of distorted members.1.2

37、 Limitations. This guide is intended to assist in the evaluation of existing structural elements and the development ofappropriate procedures for repairing those elements. It does not provide exhaustive coverage of any specific topic.This guide is intended to apply to the strengthening and repair of

38、 existing buildings and other structural systems. It is notintended to apply to:(1) Structures made of steels less than 1/8 in 3 mm thick(2) Pressure vessels and pressure piping(3) Structures made of materials other than those listed under the scope(4) Seismic upgrades(5) New constructionWhereas thi

39、s guide is not intended to apply the application outside the scope, the principles contained in this guide maybe applied to other materials and applications. The Engineer is advised to use caution and engineering judgment for appli-cation outside the scope of this guide.More importantly, it is criti

40、cal to state here that this document does not provide detailed specific procedures and direc-tion to correct any specific strengthening or repair operation regardless of how common or standard the procedure maybe. Instead, information supplied herein as well as that material referenced in Annex A is

41、 intended to provide users withan overall approach to weld modifications as they pertain to: strengthening and repair; technical resources to developGuide for Strengthening andRepairing Existing StructuresCLAUSE 2. NORMATIVE REFERENCES AWS D1.7/D1.7M:20102appropriate detailed specific strengthening

42、and repair contract documents or procedures; summarized guidance on typi-cal weldability of common metals; summarized guidance for testing the serviceability of the procedures and a summaryof common procedures and approaches that are intended to be modified for the specific procedure.1.3 Approval. A

43、ll references to “approval” should be interpreted to mean approval by the Engineer.1.4 Safety Precautions. Safety and health issues and concerns are beyond the scope of this standard and therefore arenot fully addressed herein. However, in addition to the material supplied in subsequent chapters of

44、this document, perti-nent information can be found in the following standalone documents: ANSI Z49.1, Safety in Welding, Cutting, andAllied Processes, and applicable federal, state, and local regulations. Other pertinent information can be found in themanufacturers safety literature on equipment and

45、 materials. These documents should be referred to and followed asrequired.NOTE: This guide may involve hazardous materials, operations, and equipment. The document does not purport toaddress all of the safety problems associated with its use. It is the responsibility of the user to establish appropr

46、iatesafety and health practices. The user should determine the applicability of any regulatory limitations prior to use.1.5 Standard Units of Measure. This guide makes use of both U.S. Customary Units and the International System ofUnits (SI). The latter are shown within brackets ( ) or in appropria

47、te columns in tables and figures. The measurementsmay not be exact equivalents; therefore, each system should be used independently of the other.2. Normative ReferencesThe standards listed below contain provisions, which, through reference in this text, constitute mandatory provisions ofthis AWS gui

48、de. For undated references, the latest edition of the referenced standard shall apply. For dated references,subsequent amendments to, or revisions of, any of these publications do not apply.A list of informative documents referenced in this guide is included in Annex A. There are numerous documents

49、that existand are available that cover repairs to existing structures published by AISC, AASHTO, and AREMA. These and otherdocuments will be referenced in Annex A and are all intended to provide a guide for successful strengthening and repair.American Welding Society (AWS) standards1:(1) ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes(2) AWS A3.0, Standard Welding Terms and Definitions, Including Terms for Adhesive Bonding, Brazing, Soldering,Thermal Cutting, and Thermal Spraying3. Terms and DefinitionsAWS A3.0, Standard Welding Terms and Definitions, Including Terms

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
  • BS PD CEN TR 15339-3-2014 Thermal spraying Safety requirements for thermal spraying equipment Torches for thermal spraying and their connection and supply units《热喷涂 热喷涂设备的.pdf BS PD CEN TR 15339-3-2014 Thermal spraying Safety requirements for thermal spraying equipment Torches for thermal spraying and their connection and supply units《热喷涂 热喷涂设备的.pdf
  • BS PD CEN TR 15339-4-2014 Thermal spraying Safety requirements for thermal spraying equipment Gas and liquid fuel supply《热喷涂 热喷涂设备的安全要求 气体和液体燃料供应》.pdf BS PD CEN TR 15339-4-2014 Thermal spraying Safety requirements for thermal spraying equipment Gas and liquid fuel supply《热喷涂 热喷涂设备的安全要求 气体和液体燃料供应》.pdf
  • BS PD CEN TR 15339-5-2014 Thermal spraying Safety requirements for thermal spraying equipment Powder and wire feed units《热喷涂 热喷涂设备的安全要求 粉末和送丝装置》.pdf BS PD CEN TR 15339-5-2014 Thermal spraying Safety requirements for thermal spraying equipment Powder and wire feed units《热喷涂 热喷涂设备的安全要求 粉末和送丝装置》.pdf
  • BS PD CEN TR 15339-6-2014 Thermal spraying Safety requirements for thermal spraying equipment Spray booth Handling system Dust collection Exhaust system Filter《热喷涂 热喷涂设备的安.pdf BS PD CEN TR 15339-6-2014 Thermal spraying Safety requirements for thermal spraying equipment Spray booth Handling system Dust collection Exhaust system Filter《热喷涂 热喷涂设备的安.pdf
  • BS PD CEN TR 15349-2006 Hardware for furniture — Terms for extension elements and their components 《家具用五金件 延伸件及其部件用术语》.pdf BS PD CEN TR 15349-2006 Hardware for furniture — Terms for extension elements and their components 《家具用五金件 延伸件及其部件用术语》.pdf
  • BS PD CEN TR 15350-2013 6796 Mechanical vibration Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by man.pdf BS PD CEN TR 15350-2013 6796 Mechanical vibration Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by man.pdf
  • BS PD CEN TR 15351-2006 Plastics — Guide for vocabulary in the field of degradable and nbiodegradable polymers and plastic items《塑料 可降解的和可生物降解的聚合物和塑料产品领域的术语指南》.pdf BS PD CEN TR 15351-2006 Plastics — Guide for vocabulary in the field of degradable and nbiodegradable polymers and plastic items《塑料 可降解的和可生物降解的聚合物和塑料产品领域的术语指南》.pdf
  • BS PD CEN TR 15356-1-2006 Validation and interpretation of analytical methods migration testing and analytical data for materials and articles in contact with food — Part .pdf BS PD CEN TR 15356-1-2006 Validation and interpretation of analytical methods migration testing and analytical data for materials and articles in contact with food — Part .pdf
  • BS PD CEN TR 15367-1-2014 Petroleum products Guidelines for good housekeeping Automotive diesel fuels《石油产品 良好家务管理指南 第1部分 机动车用柴油燃料》.pdf BS PD CEN TR 15367-1-2014 Petroleum products Guidelines for good housekeeping Automotive diesel fuels《石油产品 良好家务管理指南 第1部分 机动车用柴油燃料》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1