1、INCITS/ISO/IEC 15404:20002008 (ISO/IEC 15404:2000, IDT) Information technology Office machines Minimum informationto be included in specification sheets Facsimile equipmentINCITS/ISO/IEC 15404:20002008(ISO/IEC 15404:2000, IDT)INCITS/ISO/IEC 15404:20002008 ii ITIC 2008 All rights reserved PDF disclai
2、mer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties acc
3、ept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the
4、file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Adopted by INCITS
5、 (InterNational Committee for Information Technology Standards) as an American National Standard. Date of ANSI Approval: 6/18/2008 Published by American National Standards Institute, 25 West 43rd Street, New York, New York 10036 Copyright 2008 by Information Technology Industry Council (ITI). All ri
6、ghts reserved. These materials are subject to copyright claims of International Standardization Organization (ISO), International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council (ITI). Not for resale. No part of this public
7、ation may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW, Washington, DC 20005. Printed in the United States of America INCITS/ISO/IEC 15404:2000
8、2008 ITIC 2008 All rights reserved iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of
9、 International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in l
10、iaison with ISO and IEC, also take part in the work. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standard
11、s adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard m
12、ay be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. International Standard ISO/IEC 15404 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 28, Office equipment. Annex A of this Int
13、ernational Standard is for information only. AMERICAN NATIONAL STANDARD INCITS/ISO/IEC 15404:20002008 ITIC 2008 All rights reserved 1 Information technology Office machines Minimum information to be included in specification sheets Facsimile equipment 1 Scope This International Standard is intended
14、to facilitate the users in selecting facsimile equipment which meets their requirements. This International Standard specifies the minimum information that shall be included in the specification sheets of facsimile equipment so that users may compare the characteristics of different machines. This I
15、nternational Standard applies to facsimile equipment that could be operated in an office environment. Facsimile equipment requiring specially equipped rooms or specially instructed operators are not considered in this International Standard. Facsimile equipment is assigned to group 3 and 4 depending
16、 on technical capabilities and is classified according to paper handling, scanning, recording and resolution. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references,
17、 subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated reference
18、s, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 554:1976, Standard atmospheres for conditioning and/or testing Specifications. ISO 7779:1999, Acoustics Measurement of airborne noise emitted
19、 by information technology and telecommunications equipment. ISO 9295:1988, Acoustics Measurement of high-frequency noise emitted by computer and business equipment. ISO 9296:1988, Acoustics Declared noise emission values of computer and business equipment. IEC 60950:1999, Safety of information tech
20、nology equipment. CISPR Pub.22, Limits and methods of measurement of radio interference characteristics of information technology equipment. 3 Conformance In order to comply with this International Standard, specification sheets shall contain, in the order shown, all items listed in clause 4 which a
21、re relevant to the machine being described. INCITS/ISO/IEC 15404:20002008 2 ITIC 2008 All rights reserved 4 Environmental conditions Unless otherwise specified, all tests and measurements shall be conducted at the following conditions: temperature: 18 C to 25 C relative humidity: 30 % to 70 % voltag
22、e: rated input voltage frequency: rated frequency paper size: A4 paper weight: 60 g/m2 to 90 g/m2 Whenever a capacity is given in sheets, the reference paper weight shall be specified. When A4 paper size is specified, the size most commonly used in the country can be used, both for the test page and
23、 the copies. This shall be indicated in the specification sheet. When weight of paper (g/m2) is given, it is assumed that the paper has been conditioned in the standard atmosphere defined in ISO 554 (temperature 20 C 2 C; relative humidity 65 % 5 %). INCITS/ISO/IEC 15404:20002008 ITIC 2008 All right
24、s reserved 3 5 Information to be included in the specification sheets Table 1 defines, for each parameter, the number, the name of the parameter and a short description of the entry. Table 1 Parameter Description of the entry remarks and examples 1 General data 1.1 Machine name, model and/or model n
25、umber Product name, model number 1.2 Type States if the machine is portable, desk-top, floor-standing (console), modular, multifunction 1.3 Approval number Number from governmental or other authorities 1.3.1 Registration number 1.3.2 Certificate 1.3.3 Declaration of conformity 1.4 Equipment groups I
26、TU-T Group 3 and/or 4 1.5 Equipment type Only transmitter or receiver or specialities 1.6 Operating modes 1.6.1 Basic operating modes Equipment for manual transmission Facsimile equipment on which a transmission can only be started with operator assistance Equipment for automatic transmission Facsim
27、ile equipment which allows one or more documents to be transmitted in succession without operator assistance (automatic dialling, last number redial, multi-address call, deferred transmission, polling) Equipment for manual reception Facsimile equipment on which a reception can only be started with o
28、perator assistance Equipment for automatic reception Facsimile equipment which allows one or more received copies to be received without operator assistance 1.6.2 Equipment for additional operating mode Equipment for staggered transmission Facsimile equipment for transmitting messages at a specified
29、 time Equipment for multi-address calling Facsimile equipment for transmitting the same document to several recipients in parallel or in succession Equipment for operation in memory mode Facsimile equipment for transmitting from or receiving to a memory Facsimile equipment with polling Facsimile equ
30、ipment with polling (triggering mode): receiver triggers transmission. Facsimile equipment with polling (executive mode): transmission is made available for polling Equipment with error correction mode Facsimile equipment with a transmission procedure which detects any faulty areas between compatibl
31、e transmitters and receivers and retransmits document INCITS/ISO/IEC 15404:20002008 4 ITIC 2008 All rights reserved Table 1 (continued) Parameter Description of the entry remarks and examples 1.7 Transmission With telephone-network or other 1.8 Line connection Direct or other 1.8.1 Length of connect
32、ion cord Definition in m 1.8.2 Connector type 1.9 Input sensitivity Definition in dB, dBm, dBV etc. 2 Transmitter, Scanner 2.1 Type Flat bed or other 2.2 Resolution In pels/mm (metric resolution) Definition in pels per 25,4 mm (inch-based resolution) 2.2.1 Highest resolution In pels/mm (metric resol
33、ution) Definition in pels per 25,4 mm (inch-based resolution) 2.2.2 Resolution during transmission In pels/mm (metric resolution) Definition in pels per 25,4 mm (inch-based resolution) 2.3 Document to be transmitted Paper Min. and max. size Min./Max. in g/m2 Equipment with automatic paper feed for r
34、eceived copy from paper roll Facsimile equipment on which the paper for the received copy is fed in automatically from a paper roll 2.4 Scanning characteristics 2.4.1 - 2.4.3 Halftone, multicolour, full colour 2.5 Recognition of colours 2.5.1 tending to black 2.5.2 tending to white 2.6 Reduction Des
35、cription of possibilities 3 Receiver, Printer 3.1 Paper feeding mode 3.2 Printing technology 3.3 Resolution 3.3.1 Highest resolution In pels/mm (metric resolution) In pels per 25,4 mm (inch-based resolution) 3.3.2 Receiving resolution In pels/mm (metric resolution) In pels per 25,4 mm (inch-based re
36、solution) 3.4 Paper specification In this standard, “paper“ means any kind of printing matter suitable for documents to be transmitted and for received copies. Paper format 3.4.1 Receiving paper In g/m2 3.4.2 Paper supply 3.4.3 Roll width 3.4.4 Writability Definition of kind 3.4.5 Storage characteri
37、stics Description of environment INCITS/ISO/IEC 15404:20002008 ITIC 2008 All rights reserved 5 Table 1 (continued) Parameter Description of the entry remarks and examples 3.5 Kind of paper Description of environment 3.6 Further consumable supplies 4 Transmitting time 4.1 Transmitting time for group
38、3 Equipment transmitted with time of connection 4.1.1 Minimum scan line time For receiving 4.1.2 Minimum scan line time For transmitting 4.2 Transmitting time for group 4 5 Equipment size, weight, installation and operating conditions 5.1 Dimensions Dimensions of the machine 5.2 Installation conditi
39、on Space requirements 5.3 Environmental conditions Minimum and maximum ambient temperature and related range of relative humidity 6 Power source 6.1 Rated voltage Expressed in volts 6.2 Power consumption Average power consumption per hour in kilowatts 6.3 Frequency range Expressed in Hertz 6.4 Power
40、 consumption Net dependent or Net independent 6.5 Power supply Length of the main power cord 6.6 Line isolation Normal, other 6.7 Safety class Line to earth of the supply class or class II 6.8 Safety regulation Applicable standards 6.8.1 Standards National and international standards 6.8.2 Safety da
41、ta signs 6.9 Manufacturers 7 Electromagnetic capability (EMC) 7.1 Requirements 7.2 Safety data sign 8 Emission 8.1 Acoustical noise Measure according to ISO 7779 and ISO 9295. Declare according to ISO 9296. Specify for basic and maximum configuration 8.2 Heat emission The heat emission per hour shal
42、l be indicated in kW, for all conditions specified under 6.2 Power consumption kW heat emission per hour = 3 600 8.3 Other emission Description 8.4 Consumable supplies Consumables and packaging INCITS/ISO/IEC 15404:20002008 6 ITIC 2008 All rights reserved Table 1 (continued) Parameter Description of
43、 the entry remarks and examples 8.5 Optional equipment Peripheral equipment that changes the functionality of the machine (e.g. a sorter, a document handler, a 35 mm slide projector, a fanfold paper feeder) 8.6 Accessory equipment Peripheral equipment that does not change the functionality of the ma
44、chine (e.g. paper cabinet) 8.7 Other An entry category for the supplier to highlight features or functionality that does not fit in any of the previous listed parameters Remote diagnostic capability, user interfaces, connectivity from a communication perspective INCITS/ISO/IEC 15404:20002008 ITIC 20
45、08 All rights reserved 7 Annex A (informative) Example of a layout for a specification sheet 1 General data 1.1 Machine name/model and/or model number _ 1.2 Type portable desk-top floor-standing (console) modular multifunction 1.3 Approval number of governmental or other authorities approvals 1.3.1
46、Registration number _ 1.3.2 Certificates (e.g. environmental certification marks, compatibilty certificates) _ _ _ 1.3.3 Declaration of conformity 1.4 Equipment groups (to UIT/TS - Recommendation T series) Group 3 - T.4 Group 4 - T.563 1.5 Equipment type Transmitter only Receiver only Transmitter an
47、d Receiver Simultaneous Transmitter and Receiver Specialities _ 1.6 Operating modes 1.6.1 Basic operating modes transmitting manual automatic dialling receiving manual automatic 1.6.2 Additional operating modes delayed transmitting error correction mode multi-addressing store and forward mode INCITS/ISO/IEC 15404:20002008 8 ITIC 2008 All rights reserved polling triggering executing - normal - with password - selective - relay mode transmitting with subaddress transmitting with password file transfer 1.7 Transmission telephone network other
