1、A-A-5003b 73 7777774 0037488 3 W A-A- 50036 September 30, 1982 COMMERCIAL ITEM DESCRIPTION DOUGH TROUGHS The Geaiel-al Services Administration has authorized the use of this Commercial Item Description in preference to Size 4 and Size 6 of Military Specification MIL-B-13053. Intended Use. bakeries a
2、nd pastry kitchens for transportis dough. The dough troughs covered by this CID are intended for use in Sizes : P Size 4 - 4 ft. long Size 6 - 6 ft. 10% Salient Characteristics: Description. The dough trough shall be fabricated of stainless steel (min. 12 gage) conforming to ASTM-A167 and shalX have
3、 a rectangular shape. The top of the doilgh trough shall have a rolled rim tightly closed and seal welded against the wall of the trough. less steel. The ends shall be welded to the sides and bottom. Caster shoes shall be completely inclosed and be seal welded to the trough body. The sides and botto
4、m of the trough shall be formed of one sheet stain- Casters. swivel casters bolted to caster shoes. The swivel assembly shall have ball or roller bearixs equipped with a pressure type lubricating fitting. bearings shall be ball or roller with pressure type lubricating fitting or lubricated and perma
5、nently sealed. fabricated from nonmarking material. The dough trough shall be equipped with four heavy duty sanitary type The wheel Caster wheels shall be 4 inch diameter minimum Dimensions. The minimum inside dough trough dimensions shall be 26 inches wide at the top, 21 inches deep, 4 feet long fo
6、r size 4 and 6 feet long for size 6. Standard compliance. Standard No. 2. The dough troughs shall comply with Baking Industry Sanitation Identification plate. the contract number, national stock number, manufacturers -name, trade name, or trademark of such known character that the source of manufact
7、ure can be determined. The doqh trough shall be plainly and permanently marked with Certification. salient characteristics of the description and conforms to the producers own drawings, specifications, standards, and quality assurance practices, and is the same as the product sold in the commercial
8、marketplace. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The contractor shall certify that the product offered meets the FSC 7320 / THIS DOCUMENT CONTAINS 3 PAGES.
9、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5003b 73 7777974 OOL7489 5 Marking of interior boxes and shipping containers (commercial and export). Comercial marking for interior boxes and shipping containers is acceptable provided the followi
10、ng information is included: A-A- 50036 I lil 1/ Interior boxes do not require this information. Source of Information for Non-Government Association Documents AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) A167 - Stairiless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and Strip (Applicat
11、ion for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) Packag in comercial practice, Comercial packaging, Dough troughs shall be packaged in accordance with Comercial packing. Dough troughs shall be packed in a manner to insur
12、e carrier Containers shall comply with the Uniform Freight Classification or acceptance and safe delivery at destination at the lowest transportation rate for such supplies, National Motor Freight Classification, as applicable, packaged in a class weather-resistant fiberboard box constructed and clo
13、sed in accordance with PPP=B-636, Boxes, Shipping, Fiberboard. cleaned, preserved and cushioned to afford adequate protection against corrosion, deterioration and physical damage during shipment and storage. Export packaging. The swivel casters shall be removed from the trough and be The trough shal
14、l be I Export packin& Each dough trough shall be packed in a snug-fitting wood-cleated plywood box conforming to domstic type, style A or J, grade B, type 2 load of PPP-B-601, Boxes, Wood, Cleated Plywood or nailed wood box conforming to class 1, style 2 or 4, grade B, type 2 load of PPP-B-621, Boxe
15、s, Wood, Nailed and Lock Corner, the contents of the box shall be cushioned, blocked and braced to prevent movement while the box is in transit, Each shipping container shall be closed and strapped in accordance with the appendix of PPP-B-601 or PPP-B-621, as applicable, National Stock Number Item D
16、escription Quantity, Unit of Issue Date of Packaging (month/year) Contract Number Name, Address and Zip Code of Contractor L/ 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I - A-A-5003b 73 = 999997Ll 0017490 I W A-A- 50036 BAKING INDUSTRY SANITAT
17、ION STANDARD (BISSC) NO. 2 Dough Troilghs (Copies of Baking Industry Standards Publication may be obtained from the Baking Indusfry Sanitation Standards Committee, 521 Fifth Avenue, New York, NY 1Q017.) i- G National Motor Freight Classification National Motor Freight Traffic Association, Inc., kent
18、 American Trucking Associations, Inc., Traffic Department, 1616 P Street, N.W., Washirgton, DC 20036 Uniform Classification Committee, Agent Uniform Freight Classification Uniform Classification Committee, Suite 1106 222 South Riverside Plaza, Chicago, IL 60606 c MILITARY INTERESTS: CIVIL.AG5NCY COORDINATING ACTIVITY: Custodians GSA - FSS Army - GL PREPARING ACTIVTY: N&y - YD Air Force - 99 Review activities Army - MD Navy - MC, MS, SA 3 Army - GL Project No. 7320-0715 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
