1、A-A-50174 77 7777774 0047234 O I c- 44 - 35- A-A-501 74 October 5, 1988 COMMERCIAL ITEM DESCRIPTION CANDLELIGHTER AND SNUFFER The General Services Administration has authorized the use of this commercial item description in preference to item 2 of MIL-C-43467. 1. SALIENT CHARACTERISTICS 1.1 Design a
2、nd construction. The candlelighter and snuffer shall be fabricated of commercial brass with a chromium plate finish. length of the candlelighter and snuffer shall measure approximately 36 inches including the handle. The handle shall be fabricated of hard maple, stained a dark mahogany and coated wi
3、th a clear organic finish. The candlelighter shall be designed to accommodate one candle taper measuring 16-18 inches long. The snuffer shall be bell shaped in design measuring approximately 2-3 inches at the base and tapering at the top. to be disassembled for packaging. may be specified by the pro
4、curing activity, The overall The candlelighter and snuffer shall be able The design of the candlelighter and snuffer 2. QUALITY ASSURANCE 2.1 Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own d
5、rawings, specifications, standards, and quality assurance practices. commercial characteristic the contractor shall furnish data resulting from inspection conducted in accordance with the specific quality assurance provisions. The Government reserves the right to require proof of such conformance pr
6、ior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. When specific quality assurance provisions are specified for any 3, PACKAGING 3.1 Packaging. Each candlelighter and snuffer shall be disassembled into components. Each component shall be compl
7、etely wrapped in tissue paper or enclosed in a clear polyethylene bag. Each candlelighter and snuffer shall be placed into a snug-fitting fiberboard box. Each candlelighter and snuffer shall be cushioned as required to prevent movement or damage during shipment or storage. hMSC NIA FSC 9925 DISTRIBU
8、TIOE STATEMENT A. Approved for public release; distribution is unlimited. a THIS DOCUMENT CONTAINS 2 PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5 O 1 7 4 3.2 Packing. Ten candlelighters and snuffers, packaged as specified, shall be pa
9、cked in a snug-fitting fiberboard shipping container conforming to style RSC, type CF, (variety SW) or SF, class domestic, grade 275 of PPP-B-636, The shipping container shall be completely filled with no voids, and of a size that can be palletized in accordance with the appendix of PPP-B-636. 3.3 P
10、alletization. When specif ied (see 4.2) candlelighters and snuffers, packed as specified, shall be palletized on a 4-way entry pallet in accordance with load type la of MIL-STD-147. Each prepared load shall be bonded by means K and L or O or P in accordance with MIL-STD-147. 3.4 Marking. purchase or
11、der, unit packs, shipping containers and unitized pallet loads shall be marked in accordance with MIL-STD-129. In addition to any ssecial markings required by the contract or 4, NOTES 4.1 Intended use. The candlelighter and snuffer covered by this document is intended to be used with tapers to light
12、 and extinguish candles in Military Chapels. 4.2 Ordering data. a. Title, number, and date of this document. b, When palle.tization is required (see 3.31 4.3 Source for government documents. Copies of military and Federal documents are available from: Naval Publications and Forms Center 5801 Tabor A
13、venue Philadelphia, PA 19102 MILITARY INTERESTS: Custodians: Army - GL Navy - PE Air Force - 28 Review Activities: Navy - PE Air Force - 28 Armed Forces Chaplains Board CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS Preparing Activity: Army - GL PROJECT NO. 9925-1013 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
