1、. i MIL-A-53009A b8 m 99999Ob 0483244 3 m SENSITntE %IIL-A-53009A 2 July 1991 - SUPERSEDING MIGA-53009 6 August 1982 MILITmY SPECIFICATION ADDITIVE, ANTIFREEZE EXTENDER, LIQUID 02OLLWG SYS- This specification is approved for use by all Departments and Agencies of the Deparhnent of Defense. 1. SCOPE
2、1.1 Scope. This specification covers one type and one grade of additive intended for inhibiting water or reinhibiting used MIL-A-46153 antifreeze (see 6.1) . . standm form a part of this document to the extent-specified herein. Unless otherwise specified, the issues of these documents are those list
3、ed in the issue of the Depariment of Lkfense Index of Specifications and Standards (DODISS) and supp1enm-k thereto, cited in the solicitation (see 6.2). SPECIFICATION NN-P-71 - Pallet, Material Handling, Wood, Stringer PPP-B-601 - Boxes, Wood, Cleated Plywood. PPP-B-621 - Boxes, Wood, Nailed and Lcc
4、k Corner. PPP-B-636 - Box, Shipping, Fiber-. PPP-(2-569 - Container, Plastic, Molded (for Liquids, Pastes and construction, 2 way and 4 way (Partial). Powders), Overpacked. Beneficial comments (recormnendations, additions, deletions) and any pertinent data which may be of use in improving this docum
5、ent should be addressed to: USA Belvoir Research, Development, and Ehgineering Center, AlTN: STRBE4SE, Fort Belvoir, VA 22060-5606 by using the Standardization Document linprovernent Proposal (DD Form 1426) appearing at the end of this document or by letter. FSC 6850 DISTRIBUTION STATEMENT A. Approv
6、ed for public release; distribution is unlimited. “ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIUTARY MIGB-26701 Bottles, Screw Cap and Carboys, Polyethylene Plastic. STZlNDAFW FEDERaL m)-sm323 - Material SaEety Data Sheets, TranspoL-tation Dat
7、a and Disposal Data or Hazardous Materials l?umished to Government Activities MILrSTD.lQ5 - Sampling procedures and Tables for Inspection by HILrSTD-129 - Marking r Shipment and Storage. MIbSTD-147 - Palletized Unit hads, Attributes. (Unless otherwise indicated, copies of federal and military specif
8、ications, standards, and handbooks are available from the Standaxdization IXmmenb Order Deskt milding 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094,) 2,2 Non-Govemnt publications. The Eollowing documenk(s) form a part of this dmt to the extent specified herein, Unless otherwise specified, the
9、issues of the documsnts which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DllDISS are the issues o the documents cited in the solicitation (see 6.2) . D 1121 - Reserve Alkalinity of Eqine
10、 Antifreeze, Mtirusts, and Coolants. D 1222 - Specific Gravity of Ihgine Coolants by the Hydrometer, D 1287 - pH of ngine Antifreezes, Antirusts and Cwlar fabricated from fiber- conforming to AS D 4727, type CF, Class weather-resistant, variety SW, grade W5c. Box closure and strappiy shall be in acc
11、ordance with the appendix to the applicable box specification, 5.2.2 Level B. Packing shall be as specified in 5.2.1 for level A except the e 5.2.3 Level C. Packing shall be as specified in 5.2.2 except the boxes shall box shall conform to PPP-B-636, class weather resistant, grade V3c. be domestic c
12、lass. 5.3 Storacre marking. In addition to any special marking specified in the .contract or purchase order (see 6.2), marking shall be in accordance with “129. 5.3.1 Warninq. Each container shall be marked with the following warning: %tore at temperature above 10 “C (50 “F). Separation may occur at
13、 lower termperatures and can only be redissolved at elevated temperatures with agitation. 11 5.3.2 Metric equivalent. Each container shall be marked to include the metric equivalent of the unit container quantity as: “1 quark (O. 95 liters) or “1 q$. (0.95L)“. 5.4 Palletization. When specified in th
14、e contract or order (see 6.2) the packed additive for level A, B or C shall be palletized in accordance with MIGSTD-147, load type as applicable, using pallets conforming to NN-P-71, type IV. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIGA-530
15、09A 60 NOTES (This section contains infomtion of a general or explanatory nature that my be helpful, hut is not mandatory. ) 6,l Interded use, The additive is intended for use in used MIL-A-46153 antifreeze and in water at a concentration of three percent (one-half quart additive per seventeen quart
16、s antifreeze or water)-. me antifreeze is defined as antireeze that tests green to yellow when tested as specified in TB 750-651, Use of Antifreeze solutions and cleaning Compounds in Engine wling Systems, using A-A-52461, Test Kit, Antifreeze, Freeze Point and Corrosion. 6.2 Acquisition requirement
17、s. Acquisition documents should speciy the folla&lg: a. Title, nmber, and date of this specification, b. Issue of DODISS to be cited in the solicitation, and i required, the specific issue of irdividual documenb referenced (see 2.1.1 and 2.2). c. When a first article is required for inspection and a
18、pproval, and th number of units required (see 3.1) d, Uvel of packing required (see 5,2) . e. Any special marking (see 5.3) . E . When palletization is required (see 5 I 4) . 6,3 First article, When a first a&icle insion is required, the item(s) should bo an initial production sample, The first arti
19、cle should consist e one filled quart unit. The contracting officer should include sFif ic instructions in acquisition documents regarding arrangements for examinations, appmval of the first article test results and disposition of the first articles. Invitation for bids should provide that the Gover
20、ment reserves the right to waive the requirement for samples for first article inspection to those biddm ofwing a product which has ken previously acquired or tested by the Government, and that bidders oferirg such products, who wish to rely on such produ&ion or test, musk -ish evidence with the bid
21、 that prior Govemnt approval is presently apprapriate for the pending contrack, Bidders should not submit alternate bids unless specifically recpested to do so in the solicitation, G , 4 Additive to plastic containers. An additive which is knam to be effective in excluding ultraviolet Light from the
22、 interior of plyethylene containers is phthalocyanine blue, 6.5 Rparation of additive 6.5.2 Mixinq sequence. In order to obtain a clear solution the folkVhg mixing sequence should be Eollowed: a. Weigh distilled water, b. Heat at 38 “C (100 “F) and stir in weighed sodium metaborate c. Cool to rmm te
23、mperature (25 O C) a d. Add weighed potassium silicate to the water/borate soMxi.on. e. Add weighed sodium mercaptoknzothiazole and stir until all cmpmb Wydrate until solution is clear. have dissolved. After all components am h solution, stir an additional 30 minutes 8 c t e O * Provided by IHSNot f
24、or ResaleNo reproduction or networking permitted without license from IHS-,-,-.c MIL-A-53009A bB W 77777Ob 0483252 2 I i a r* MIL-A-53009A 6.6 Material Safety Data Sheets. Contracting officers will identify those 0 activities requiring copies of completed Material Safety Data Sheets prepared in acco
25、rdance with FED-STD-313. The pertinent Government mailing addressed for submission of data are listed in FED-STD-313, appendix B. 6.7 Potassium silicate. KASIL #6, manufactured by the Philadelphia Quartz Company, P.O. Box 840, Valley Forge, PA 19482, has a weight ratio of SiO, to K20 of 2.1 to 1.0.
26、6.8 Levels of preservation. Levels of preservation have not been included as the preservation specified is the minimum acceptable for protection. 6.9 Dismsability. If this product becomes a waste, it does not meet the criteria of a hazardous waste as defined by the Environmental Protection Agency (E
27、PA). As a nonhazardous liquid waste, it should be solidified with stabilizing agents (such as sand or cement) so that no free liquid remains before disposal to an industrial waste landfill. A non-hazardous liquid waste can also be deep-well injected in accordance with local, state, and federal regul
28、ations. 6.10 Subject tem (key word) listinq. Antifreeze Antifreeze corrosion test kit corrosion inhibitor Erqine coolant system Supplemental coolant additive Water inhibitor O 6.11 Chanqes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extensiveness of the changes. Custodians: -“E Navy - SH Air Force - 68 Review activities: Army - AT, SM DIA - GS 9 Preparing activity: “ME Project 6850-1063 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
