1、MIL-D-51091 J(EA) AMENDMENT 3 28 February 1990 SUPERSEDING AMENDMENT 2 29 December 1988 MILITARY SPECIFICATION DECONTAMINATING APPARATUS, POWER DRIVEN, SKID-MOUNTED, MULTIPURPOSE, NONINTEGRAL, 500-GALLON, M12A1 This amendment forms a part of MIL-D-51091J(EA), dated 16 December 1986, and is approved
2、for use by the U.S. Army Chemical Research, Development and Engineering Center, Department of the Army and is available for use by all Departments and Agencies of the Department of Defense. PAGE 3 3.3.2: Delete in its entirety and substitute the following: “3.3.2 Fuel tank. The unpainted tank shall
3、not leak, except at the fuel quantity transmitter screw holes when subjected to an internal air pressure of 2 to 3 pounds per square inch gage (psig) when tested as specified in 4.4.4.1.” PAGE 8 5.1.1.2: Lines 3, 4 and 5: Delete the following sentence: “The interior surfaces of the tanks and fitting
4、s including the gasoline tank, shall be completely coated with preservative oil conforming to grade 2, MIL-L-21260. AMSC NfA FSC 4230 DISTRIBUTZON STATEMENT A. Approved for public release; distribution is unlimited. 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without
5、license from IHS-,-,-MIL-D-5 1 O9 1 JA) AMENDMENT3 PAGE 9 5.1.1.7, lines 6, 7, 8 and 9: Delete “The blending-agitator hose, shall then be stowed within the suction hose. Both hoses, together, shall then be installed, coiled, within the holding brackets on top of the tank unit.” and substitute “The b
6、lending-agitator hose, shall then be coiled and stowed within the hopper assembly. The suction hose shall then be installed, coiled, within the holding brackets on top of the tank unit.” Custodian: Preparing activity: Army - EA Army - EA Project No. 4230-AO89 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
