1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, VALOR MEDAL, OFFICE OF PROTECTION SERVICES, SMITHSONIAN INSTITUTE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein s
2、hall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass FINISH: Nickel Plated, Silver Plated, Oxidized, Buffed Relieved, Matte Finish and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 14. DIMENSIONS: DIAMETER: 5/8 inch (REF) THICKNE
3、SS (at edge): 0.085 inch + 0.005 inch INCH-POUND MIL-DTL-11484/230B 31 March 2010 SUPERSEDING MIL-DTL-11484/230A 27 September 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/230B Page 2 of 2 NOTES: 1. The term (REF) refers to the m
4、easurements taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and flat ball clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. 3. This item is not authorized for commercial sale, and may be produced only under
5、 Government contract. A copy of the original purchase order from the Government Agency concerned must accompany all written requests prior to the loan of a Government hub or die. CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes f
6、rom the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the margin
7、al notations and relationship to the last previous issue. Custodian: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-161) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
