1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, SUPERIOR CIVILIAN SERVICE AWARD, INSPECTOR GENERAL, DEPARTMENT OF DEFENSE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described
2、herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Not less than 85/15 Rich-Low Brass FINISH: Nickel Plated, Silver Plated, Oxidized, Buffed Relieved, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip N
3、umber 15. DIMENSIONS: DIAMETER: 5/8 inch (REF) THICKNESS (overall): 0.070 0.005 inch INCH-POUND MIL-DTL-11484/264C 10 March 2010 SUPERSEDING MIL-DTL-11484/264B 10 May 2005 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/264C Page 2 of 2
4、 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. CHANGES FROM PREVIOUS ISSUE: The mar
5、gins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the
6、 requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodian: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-114) DLA - CT NOTE: The activities listed above were interested
7、in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
