1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-11484/310A 20 November 2009 SUPERSEDING MIL-DTL-11484/310 3 November 2004 DETAIL SPECIFICATION SHEET LAPEL BUTTON, RETIRED, COAST GUARD This specification is approved for use by all Departments and Agencies of the Department of Defense. The requiremen
2、ts for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Gilding Medal or Red Brass DIMENSIONS: DIAMETER: 19/32 inch (REF) THICKNESS (at thickest point): 0.065 inch 0.005 inch FINISH: Rim, Letters and Shield: Hard Enamel
3、ed or Epoxied, Gold Plated, Mirror-like Polished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 6. Recessed Area between Rim and Shield: Gold Plated, Matte Finished and shall match TIOH Metal Finish Chip Number 7. Provided by IHSNot for ResaleNo reproduction or networking
4、permitted without license from IHS-,-,-MIL-DTL-11484/310A Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Enameled/epoxied areas shall be blue as indicated. The color shall conform to TIOH Hard Enamel Color Chip No. 20. When hard ena
5、mel is used, the material requirement shall be gilding metal. When epoxy is used, the material requirement shall be gilding metal or red brass. 3. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel b
6、utton. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Navy - CG (Project No. 8455-2010-009) Review activities: DLA - CT NOTE: The
7、 activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
