1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/38F 15 August 2009 SUPERSEDING MIL-DTL-3628/38E 15 November 1996 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, MARINE CORPS RIFLE CHAMPIONSHIP (McDOUGAL TROPHY) This specification is approved for use by all Departments and Agencies of the Depa
2、rtment of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. MATERIAL: Red Brass FINISH (Pendant and Suspension Bar): OBVERSE: Gold Plated, Matte Finish, Polished Highlights and shall match The Institut
3、e of Heraldry (TIOH) Metal Finish Chip Number 8. REVERSE: Gold Plated, Mirror-like Polished and shall match TIOH Metal Finish Chip Number 6. DIMENSIONS: HEIGHT (overall): ASSEMBLED: 1-31/32 inches (REF) PENDANT (excluding lugs): 1-1/2 inches (REF) SUSPENSION BAR (excluding lugs): 9/32 inch (REF) Pro
4、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/38F Page 2 of 2 WIDTH (overall): PENDANT: 1-7/16 inches (REF) SUSPENSION BAR (including balls): 1-17/32 inches (REF) THICKNESS: PENDANT (at thickest point): 0.110 inch + .005 inch SUSPENSION B
5、AR (at rim): 0.085 inch + .005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The links shall be oblong shaped, 7/32 inch + 1/32 long by 5/32 inch + 1/32 inch wide and shall be formed from 0.040 inch + 0.002 inch diameter wire. 3. The lugs
6、 are an integral part of both the pendant and the suspension bar. 4. The attaching device shall be prong and flat ball clutch type. The prongs shall be located on the horizontal center line of the back of the suspension bar equidistant from each end and 1-3/32 inch + 1/32 inch apart. CHANGES FROM PR
7、EVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are caut
8、ioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodian: Preparing activity: Army - IH Army - IH Navy MC (Project No. 8455-2009-098) Review activities: DLA - CT NOTE: The activities
9、listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
