1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET MEDAL, GOOD CONDUCT, U.S. NAVY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the l
2、atest issue of MIL-DTL-3943. OBVERSE REVERSE DASH NO. -1: Regular Size - 2: Miniature Size MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy No. C-230) FINISH (-1 and -2): Brass, Oxidized, Buffed Relieved and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. DIMENSIONS: INCH-PO
3、UND MIL-DTL-3943/205A 7 August 2012 SUPERSEDING MIL-DTL-3943/205 30 June 1997 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/205A Page 2 of 2 DIAMETER: -1: 1-1/4 inches (REF) -2: 5/8 inches (REF) THICKNESS (At rim): -1: 0.105 inch + 0.0
4、10 inch -2: 0.080 inch + 0.010 inch DECORATION SET: Decoration set presentation case shall be as specified by the procuring agency. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The specification slash sheet for the ribbon for the pendant drap
5、e is MIL-DTL-11589/70. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Navy NU Review activity: (Project No. 8455-2012-051) DLA -
6、 CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
