1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-41819/46A 21 November 2013 SUPERSEDING MIL-DTL-41819/46 22 August 2002 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, PUBLIC SAFETY OFFICERS MEDAL OF VALOR, U.S. DEPARTMENT OF JUSTICE This specification is approved for use by all Departments and Age
2、ncies of the Department of Defense The requirements for acquiring the product described herein must consist of this specification sheet and the latest issue of MIL-R-41819. MATERIAL: Red Brass 85/15 (UNS Alloy Number C-230) DIMENSIONS: HEIGHT & WIDTH: 11/32 inch (REF) THICKNESS (at edge): 0.0525 inc
3、h 0.010 inch FINISH: 24K Gold Plated, Matte Finish, Polished Highlights and must match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. ATTACHING DEVICE: The attaching device shall be a staple type prong, as specified in MIL-R-41819 The prong shall be located in the center on the reverse
4、 of the piece. NOTES: 1. The term (REF) refers to measurements taken from the Government furnished hub or die. 2. The manufacturer may deviate from MIL-R-41819 by using nickel underplating prior to plating with 24K gold. Provided by IHSNot for ResaleNo reproduction or networking permitted without li
5、cense from IHS-,-,-MIL-DTL-41819/46A Page 2 of 2 3. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the U.S. Department of Justice. Custodian: Preparing activity: Army - IH Army - IH Civil agency: (Project No. 8455-2014-004) D
6、OJ - BJA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
