1、I 999990b 2077060 447 MIL-P-6333 1 (AR) AMENDMENT 1 1OJuLY 1998 MILITARY SPECIFICATION PERISCOPES, TANK, M44AlEl AND M44A2E1 WITH ASSOCIATED EQUIPMENT I MIL-P-6333 1 was inactivated after 19 August 1997 for new design This amendment forms a part of MIL-P-6333 1 (AR), dated 15 Februaq 1980, and is ap
2、proved for use by the US Army Armament, Research, Development, and Engineering Center, and is available for use by all Departments and Agency of the Department of Defense. PAGE 2 2.1: Drawings: Delete the following: “F11738174 Gage-interchangeability-Body Maximum” “F11738175 Gage-interchangeability-
3、Body Minimum” “FI 1738176 Gage-interchangeability-Head Minimum” “F11738177 Gage-interchangeability-Head Maximum” “F11738179 Gage-interchangeability-Mount Maximum” PAGE 18 3.1.3.2.1 : Delete in its entirety and substitute the following: “3.13.2.1 The mount assembly (1 1854833) shall be capable of acc
4、epting all Head and Body assemblies, (10558203 and 1 1834841-1 or 10542204 and 1 1834841-2) and shall meet the requirements of 3.12.4.2.” 3.13.2.2: Delete in its entirety. 3.13.2.3: Delete in its entirety. PAGE 21 Table IX: Add: “1 72 Interchangeability-Mechanical 3.13.2.1 4.6.10.13” 1 of2 AMSC NIA
5、FSC 1240 Distribution Statement A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesW 9999906 20770bL 383 W MIL-P-6333 1 (AR) PAGE 51 Add: 4.6.10.13: “4.6.1 O. 13 InterchanPreabiIitv-Mechanical. This test shall be performed utilizing the Mount Maximum
6、interchangeability gage conforming to drawing FI 17381 78. The periscopes (head and body assembly) shall be capable of insertion into the above gage. After insertion, the periscopes shall be capable of being firmly secured and subsequently removed.” Custodian: Army-AR Preparing activity: Army - AR .- (Project 1240-0046) 2 Licensed by Information Handling Services
