1、US24538 REV D 66 W 9999912 0007258 5 W f=sov-oa RDCUREMENP SPECIFICATION SUPERSEDES MIL-I- 10986 FED. SUP CLASS 6620 SHEET I OF I - MAX. DIA. REQUIREHENTS: 1. 2. 3. 4. 5. 6. 7. CONNECTOR MS 33800-1 $48 N.P.T.F. HEX -84 . I 4; MAX. CALIBRATION DATA I PRESSURE RESISTANCE (LB PER SQUARE INCH) (0C) O O
2、TO 1.0 i 2.0 TO 3.5 4.5 TO 6.0 7.0 TO 8.5 20 9.0 TO 11.0 11.5 TO 13.5 25 30 14.0 TO 16.0 35 16.5 TO 18.5 40 18.5 TO 21.0 45 21.0 TO 23.5 50 23.0 TO 26.0 55 25.5 TO 28.5 60 28.0 TO 31.0 TYPE III (PRESSURE), UNIT 2 (TRANSMITTER) OF PROCUREMENT SPECIFICATION. TRANSMITTER MUST OPERATE PROPERLY, LINEARLY
3、, AND ACCURATELY THROUGHOUT THE RANGE OF O - 60 PSI WHEN CONNECTED TO THE ASSOCIATED INOICATOR, MS24541. CALIBRATION DATA IS REQUIRED FOR INITIAL CALIBRATION PURPOSES. DURING A TEST OR SUBSEQUENT TO A TEST, THEN CALIBRATE AT O, 10,.30, AND 60 PSI ONLY. INSTRUMENTATION USED TO MEASURE RESISTANCE SHAL
4、L BE ACCURATE WITHIN TRANSMITTER INTERNAL RESISTANCE ELEMENT SHALL BE OF WIRE-WOUND CONSTRUCTION. RESISTANCE SHALL NOT BE ACCEPTABLE. SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. MARKING SHALL CONSIST OF THE MS PART NUMBER ANO THE MANUFACTURERS IDENTIFICATION IN ACCORDANCE WITH MIL-STO-1
5、30. WHEN CALIBRATION IS REQUIRED 0.5 PERCENT OF SCALE READING. THIN FILH OR THICK FILM NOTES: 1. DIHENSIONS ARE IN INCHES. UNLESS OTHERUISE SPECIFIED, TOLERANCES ARE 1/64. 2. 3. FOR DESIGN FEATURE PURPOSES, THIS STANDARD TAKES PRECEDENCE OVER PROCUREMENT DOCUMENTS REFERENCED HEREIN. THIS STANDARD IS
6、 NOT INTENDED TO LIMIT CONSTRUCTION TO FEATURES OTHER THAN AS SHOWN HEREON BY DIMENSIONS, NOTATIONS, AND REFERENCED DOCUMENTS. 4. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BIOS. 5. THE USE OF RECYCLED MATERIALS CIHICH MEET THE REQUIREMENTS OF THE APPLICABLE MATER
7、IAL SPECIFICATION WITH- OUT JEOPARDIZING THE INTENDED USE OF THE ITEM SHALL BE ENCOURAGED. MS24538-1 8376490 ARMY-AT . TITLE MILITARY STANDARD him- hhei Cusi TRANSMITTER, PRESSURE - 24 VOLT D C 60 PSI AF-99 NAVY-YD Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
