1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2003 prEN 41 65-01 7 Edition P 1 February 2003 Comments should be sent within six months after the date of publication to Electrical Domain AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Connecto
2、rs, electrical, rectangular, modular Operating temperature 175 OC continuous Part 017: Blank chimney for accessory (1 per module cavity) Product standard Srie arospatiale Luft- und Raumfahrt Connecteurs lectriques rectangulaires Elektrischer Rechtecksteckverbinder Temprature dutilisation 175 OC cont
3、inu Betriebstemperatur 175 OC konstant Partie 017 : Obturateurs pour accessoires Teil 017: Verschlussdeckel fr Zugentlastung (1 par cavit de module) Produktnorm Norme de produit modulaires in modularer Bauweise This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA-S
4、TAN (The European Association of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestand
5、ard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of AECMA-STAN it will be submitted as a draft European Standard to CEN (
6、European Committee for Standardization) for formal vote. Page 2 prEN 4165-017: 2003 Foreword This standard was reviewed by the Domain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA- STANS Gener
7、al Process Manual, this standard has received approval for Publication. Contents Page 1 Scope 2 Normative references . 3 Terminology 4 Required characteristics 5 Blank chimney for accessories 6 Designation . 7 Marking . 8 Technical specification Page 3 prEN 41 65-01 7: 2003 1 Scope This standard def
8、ines the blank chimney for accessories (1 per module cavity) used in the family of rectangular electrical connectors. The connector accessory body corresponding to those blank chimneys are defined in EN 4165-014. 2 Normative references This European Standard incorporates by dated or undated referenc
9、e provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated
10、in it by amendment or revision. For undated references the latest edition of the publication referred to apply. EN 2424, EN 41 65-001, EN 41 65-002, EN 41 65-01 4, Aerospace series - Marking of aerospace products Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature
11、 I75 “C continuous - Part 001: Technical specification - Product standard 1 ) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 002: Specification of performance and contact arrangements 1) Aerospace series - Connectors, electrical, rect
12、angular, modular - Operating temperature 175 “C continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard 1) 3 Term in ol ogy See EN 4165-001. 4 Required characteristics Dimensions are in millimetres. 1) Published as AECMA standard at th
13、e date of publication of this standard Page 4 prEN 4165-017: 2003 Class W 5 Blank chimney for accessories See Figure 1. Description Blank chimney for accessory with housing (shell) olive drab cadmium plated, aluminium alloy, conducting finish, 500 hours resistance to salt mist, maximum operating tem
14、perature 175 “C continuous Blank chimney for accessory with housing (shell) black nickel plated, aluminium alloy, 96 hours resistance to salt mist, maximum operating temperature 175 “C continuous Key 1 hexagonal clip, thread 0 0,6 Figure 1 Page 5 prEN 41 65-01 7: 2003 6 Designation EXAMPLE: Descript
15、ion block I Identity block ELECTRICAL CONNECTOR BLANK CHIMNEY I EN4165F17 ITT Number of the basic standard Class type (see Table 1) Type 17: blank chimney (see EN 4165-002) 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 Technical specification See EN 4165-001.
