1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4165-027 Edition P 1 April 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-stan.orgICS: Descriptors: ENGLISH VERS
2、ION Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 Product standard Srie arospatiale Connecteurs lectriques rectangulaires modulaires Temprature dutilisation 175 C continu P
3、artie 027 : Fiches de rack fixations inverses 2 et 4 modules, srie 3 Norme de produit Luft- und Raumfahrt Elektrischer Rechtecksteckverbinder in modularer Bauweise Betriebstemperatur 175 C konstant Teil 027: Freier rckseitiger Einschub- und Gehusesteckverbinder mit 2 und 4 Modulen, Serie 3 Produktno
4、rm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the conce
5、rned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and form
6、al agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status o
7、f a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 1st April 2014 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2014 by ASD-STAN prEN 4165-027:2014 (E) 2 Contents
8、Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics . 3 5 Rack and panel rear plug 4 5.1 For 2 modules classes W, F 4 5.2 For 4 modules classes W, F 5 5.3 Rack and panel plug class 5 6 Designation 6 7 Marking . 6 8 Technical specification . 6 Bib
9、liography 7 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 41
10、65-027:2014 (E) 3 1 Scope This standard defines the rack and panel rear mounted plug 2 and 4 modules, series 3 used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 4165-002. The protective covers corresponding to those plugs are defi
11、ned in EN 4165-019. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document
12、(including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectan
13、gular, modular Operating temperature 175 C continuous Part 002: Specification of performance and contact arrangements EN 4165-019, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 019: Protective cover for plug, for 2 and 4 modules, series 2 a
14、nd series 3 Product standard 1) EN 4165-021, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 021: Coupling system keyway for plug Product standard 3 Terms and definitions For the purposes of this document, the terms and definitions given in E
15、N 4165-001 apply. 4 Required characteristics See Figure 1 for 2 modules and Figure 2 for 4 modules. 1) In preparation at the date on publication of this standard. prEN 4165-027:2014 (E) 4 5 Rack and panel rear plug 5.1 For 2 modules classes W, F See Figure 1. Dimensions are in millimetres. REMARK Sc
16、rew coupling torque on panel 0,6 N.m 0,1 N.m Figure 1 Series 3 rack and panel plug 2 modules prEN 4165-027:2014 (E) 5 5.2 For 4 modules classes W, F See Figure 2. Dimensions are in millimetres. REMARK Screw coupling torque on panel= 0,6 N.m 0,1 N.m Figure 2 Series 3 rack and panel plug 4 modules 5.3
17、 Rack and panel plug class See Table 1. Table 1 Rack and panel plug class Class Description W Rack and panel plug with housing (shell) olive drab cadmium plated, aluminium alloy, 500 hours resistance to salt mist, maximum operating temperature 175 C continuous F Rack and panel plug with housing (she
18、ll) black nickel plated, aluminium alloy, 96 hours resistance to salt mist, maximum operating temperature 175 C continuous prEN 4165-027:2014 (E) 6 6 Designation EXAMPLE Description block ELECTRICAL RACK AND PANEL PLUG Identity block EN4165F9B4R00 Number of the basic standard Class type (see Table 1
19、) Type 9: Rack and panel plug (see EN 4165-002) Type B series 3 Shell type 4 plug 4 modules 2 plug 2 modules R = rear mounting State of delivery plug keying coupling (see EN 4165-021) 0 A Not delivered Standard 1 2 3 4 5 6 Keying code (special coding) Position of keying coupling 0 Not mounted 1 2 3
20、4 5 6 Fitted in the plug 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 Technical specification See EN 4165-001. prEN 4165-027:2014 (E) 7 Bibliography 1 EN 4165-003, Aerospace series Connectors, electrical, rectangul
21、ar, modular Operating temperature 175 C continuous Part 003: Modules series 2 and series 3 Product standard 2 EN 4165-013, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 Product standard 3 EN 4165-014, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 Product standard