ASHRAE QC-06-031-2006 Analysis of Residential System Strategies Targeting Least-Cost Solutions Leading to Net Zero Energy Homes《对导致净零能源家园的 住宅体系的战略目标的最低成本的解决方案的分析》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI ASME B18.2.8-1999 Clearance Holes for Bolts Screws and Studs《螺栓 螺钉和双头螺柱的通孔》.pdf

ANSI ASME B18.2.9-2010 Straightness Gage and Gaging for Bolts and Screws《螺栓和螺钉用平直度量规和精确计量》.pdf

ANSI ASME B18.21.1-2009 Washers Helical Spring-Lock Tooth Lock and Plain Washers (Inch Series)《螺旋弹簧锁紧垫圈 齿锁紧垫圈和平垫圈(英制系列)》.pdf

ANSI ASME B18.21.2M-1999 Lock Washers (Metric Series) (Supersedes IFI 532 1982)《锁紧垫圈(米制系列)》.pdf

ANSI ASME B18.21.3-2008 Double Coil Helical Spring Lock Washers for Wood Structures《木结构用复式圆弹簧锁紧垫圈》.pdf

ANSI ASME B18.22M-1981 Metric Plain Washers.pdf

ANSI ASME B18.24-2015 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products《B18紧固件制品的部件识别号(PIN)代码体系标准》.pdf

ANSI ASME B18.25.1M-1996 Square and Rectangular Keys and Keyways《四方型和矩型键和键槽》.pdf

ANSI ASME B18.27-1998 Tapered and Reduced Cross Section Retaining Rings (Inch Series) (Incorporating ASME B18.27.1 B18.27.2 B18.27.3 B18.27.4 and B18.27.5 Addenda A - 1999 Addenda .pdf