1、AN AMERICAN NATIONAL STANDARD ASME B5.62M-2016Hollow Taper Tooling With Flange-Face ContactASME B5.62M-2016Hollow TaperTooling WithFlange-FaceContactAN AMERICAN NATIONAL STANDARDxDate of Issuance: December 5, 2016This Standard will be revised when the Society approves the issuance of a new edition.A
2、SME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Interpretations arepublished on the Committee Web page and under http:/go.asme.org/InterpsDatabase. Periodically certain actions of theASME B5 Committee may be published as Cases. Cases are publ
3、ished on the ASME Web site under the B5 Committee Page athttp:/go.asme.org/B5committee as they are issued.Errata to codes and standards may be posted on the ASME Web site under the Committee Pages to provide corrections toincorrectlypublisheditems,ortocorrecttypographicalorgrammaticalerrorsincodesan
4、dstandards.Sucherratashallbeusedon the date posted.TheB5CommitteePagecanbefoundathttp:/go.asme.org/B5committee.Thereisanoptionavailabletoautomaticallyreceivean e-mail notification when errata are posted to a particular code or standard. This option can be found on the appropriateCommittee Page after
5、 selecting “Errata” in the “Publication Information” section.ASME is the registered trademark of The American Society of Mechanical Engineers.ThiscodeorstandardwasdevelopedunderproceduresaccreditedasmeetingthecriteriaforAmericanNationalStandards.TheStandardsCommitteethatapprovedthecodeorstandardwasb
6、alancedtoassurethatindividualsfromcompetentandconcernedinterestshavehadanopportunity to participate.The proposed code orstandardwas made available for public review and commentthat providesan opportunityfor additional public input from industry, academia, regulatory agencies, and the public-at-large
7、.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in thisdocument,anddoesnotundertaketoinsureanyoneutilizingastandard
8、againstliabilityforinfringementofanyapplicableletterspatent,norassumesanysuchliability.Usersofacodeorstandardareexpresslyadvisedthatdeterminationofthevalidityofanysuchpatentrights,andtherisk of infringement of such rights, is entirely their own responsibility.Participation by federal agency represen
9、tative(s) or person(s) affiliated with industry is not to be interpreted as government or industryendorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME proceduresand policies, which precludes th
10、e issuance of interpretations by individuals.No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.The American Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990Copyright 2016
11、byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedPrinted in U.S.A.CONTENTSForeword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vCommittee Roster . . . . . . . . . . . . . . . . . . . .
12、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viCorrespondence With the B5 Committee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiPart 1 HSK Shanks . . . . . . . . . . . . . . . . . . . . . . . .
13、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2 Forms A and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3 Forms B and D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-4 Form E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15、. . . . . . . . . . . . . . . . . 21-5 Form F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-6 Form T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16、. . . . . . . . . 21-7 Identification Coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Part 2 HSK Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292-1
17、 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292-2 Forms A and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292-3 Forms B and D . .
18、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292-4 Form E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292-5 Form F . . . . . . . . . . . . . . .
19、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292-6 Form T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Mandatory AppendixI References . . . . . . . . . . . .
20、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Nonmandatory AppendixA Recommendations for Use and Applications of HSK Forms A, C, and T . . . . . . . . . . . . . . . . . . . 41Figures1-1.3-1 Basic HSK Shank Forms . . . . . . . . . . . . . . . .
21、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-2-1 HSK Form A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-2-2 HSK Form C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 81-3-1 HSK Form B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111-3-2 HSK Form D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23、. . . . . . . . . . . . . . . . . . 131-4-1 HSK Form E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171-5-1 HSK Form F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24、. . . . . . . . . 201-6-1 HSK Form T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231-7-1 Identification Coding for HSK Shanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282-2-1 HS
25、K Receiver, Form A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302-2-2 HSK Receiver, Form C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31iii2-3-1 HSK Receiver, Form B . .
26、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332-3-2 HSK Receiver, Form D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342-4-1 HSK Receiver, Form E . . . . . . . . . . . . . . .
27、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362-5-1 HSK Receiver, Form F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372-6-1 HSK Receiver, Form T . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28、. . . . . . . . . . . . . . . . . . . . . . . . . . 38A-2.5-1 Preferred Balancing Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42A-3-1 Coolant Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29、 . . . . . . . . . . . . . . . . 43Tables1-2-1 Dimensions for HSK Forms A and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-3-1 Dimensions for HSK Forms B and D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-
30、4-1 Dimensions for HSK Form E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191-5-1 Dimensions for HSK Form F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221-6-1 Dimensions for HSK Form T .
31、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271-7-1 Allowable Combinations of HSK Form, Nominal Size, and Features per ASME B5.62M . . . . . . . . 282-2-1 Dimensions for HSK Receivers, Forms A and C . . . . . . . . . . . . . . . . . . . . . . . .
32、 . . . . . . . . . . . . 322-3-1 Dimensions for HSK Receivers, Forms B and D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352-4-1 Dimensions for HSK Receivers, Form E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362-5-1 Dimensions for
33、 HSK Receivers, Form F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372-6-1 Dimensions for HSK Receivers, Form T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39A-2.2-1 Pull Force, kN, for HSK Forms A, C, and T . . . . . .
34、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41A-2.3-1 Theoretical Speed, Torque, and Bending Moment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42ivFOREWORDASME B5.62M establishes a new American National Standard based on the “Final Report on the Res
35、earch ProjectInterface Machine/Tool: Testing and Optimization of Machine Tools,” also known as the “Aachen Reports,” published inMarch 1994bythe LaboratoryforMachine Toolsand Production Engineering oftheRheinisch-Westfaelische TechnicalCollege, Aachen University, Germany.This Standard has been creat
36、ed to eliminate confusion caused by different versions and translations of standards forthe hollow taper shank, or HSK shank.The HSKmachine tool interfaceoffers an alternative to thestandard “steep taper,”with greater stiffness,rigidity,andrepeatability than provided by ASME B5.50, CAT-V, and other
37、toolholders with 7/24 tapers.The ASME B5 TechnicalCommittee 45 felt that, in contrast to existing versions and translations of standards for the HSK, this Standard shouldcontain a more comprehensive interpretation of the Aachen findings, to eliminate confusion arising from the blend ofexisting HSK d
38、ocumentation. This Standard provides the user with a comprehensive selection of options and includessupplemental information.ASME B5.62M-2016 was approved by the American National Standards Institute on August 22, 2016.Final Report on Research Project Study on Design Possibilities for the Connection
39、 Machine/Tool, August 15, 1991, page 4vASME B5 COMMITTEEMachine Tools Components, Elements, Performance, andEquipment(The following is the roster of the Committee at the time of approval of this Standard.)STANDARDS COMMITTEE OFFICERSS. G. Wallace, ChairD. R. Alonzo, SecretarySTANDARDS COMMITTEE PERS
40、ONNELD. R. Alonzo, The American Society of Mechanical EngineersJ. A. Babinski, Contributing Member, Thomson Aerospace however,theyshouldnotcontainproprietarynamesorinformation.RequeststhatarenotintheformatdescribedabovemayberewrittenintheappropriateformatbytheCommitteepriorto being answered, which m
41、ay inadvertently change the intent of the original request.viiASMEproceduresprovideforreconsiderationofanyinterpretationwhenorifadditionalinformationthatmightaffectan interpretation is available. Further, persons aggrieved by an interpretation may appeal to the cognizant ASMECommitteeorSubcommittee.
42、ASMEdoesnot“approve,”“certify,”“rate,”or“endorse”anyitem,construction,proprietarydevice, or activity.AttendingCommitteeMeetings. The B5 Standards Committee regularly holds meetings and/or telephone confer-encesthatareopentothepublic.Personswishingtoattendanymeetingand/ortelephoneconferenceshouldcont
43、acttheSecretaryoftheB5StandardsCommittee.FutureCommitteemeetingdatesandlocationscanbefoundontheCommitteePage at http:/go.asme.org/B5committee.viiiPart 1HSK Shanks1-1 GENERAL1-1.1 ScopeThis Standard covers basic toolholder shanks with ahollow 1/9.98 taper, and simultaneous contact faceand taper matin
44、g surfaces that are applicable to arange of machine tool applications. Hollow taper shank(HSK shank) Forms A, B, C, D, E, F, and T with nominalflange diameters of 25 mm to 160 mm are covered bythis Standard.1-1.2 InterchangeabilityMachinetoolinterfacesconformingtothisStandardareinterchangeable with
45、machine tool interfacesconformingto DIN 69893-1:2003, DIN 69893-2:2003, DIN 69893-5:2004, DIN 69893-6:2003, ISO 12164-1:2001, ISO12164-2:2001,ISO12164-3:2008,andISO12164-4:2008.1-1.3 FormsTheHSKmachinetoolinterfacesasmanufacturedinthesevenbasicshankforms(seeFigure1-1.3-1),andascusto-mized by selecti
46、on of several optional features, aresuitable for use in a wide range of machine tool applica-tions. The seven basic shank forms are as follows:(a) Form A. Form A is the preferred design for use onmachinetoolswithautomatic toolchangers.Keywaysarelocatedatthesmallendofthetooltaper.FormAincludesprovisi
47、on for through-tool coolant and manual toolchange. See Figure 1-1.3-1, illustration (a).(b) Form B. Like Form A, Form B is for use on machinetools with automatic tool changers, but it has a reducedtaper compared to Form A. Keyways are located on theflange. Form B includes provision for through-flang
48、ecoolant and manual tool change. See Figure 1-1.3-1, illus-tration (b).(c) Form C. Form C is similar to Form A but is intendedfor use on machine tools requiring manual tool change.Tools with Form C shanks are typically used on transferlines,oraspartofamodulartoolingsystem.SeeFigure1-1.3-1, illustrat
49、ion (c).(d) FormD.FormDissimilartoFormBbutisintendedforuseonmachinetoolsrequiringmanualtoolchange.SeeFigure 1-1.3-1, illustration (d).(e) Form E. Form E is similar to Form A,but it does nothave keyways or orientation features. Form E is intendedfor high-speed machining. See Figure 1-1.3-1, illustration(e).(f) FormF.FormFissimilartoFormEbuthasareducedtaper size. Form F is intended for high-speed machining.See Figure 1-1.3-1, illustration (f).(g) Form T. Form T is similar to Form A but has modi-fications to accommodate use with stationary tools. SeeFigure 1-1.3-1, illustration (g).1-
