ASME B89 4 10360 2-2008 Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2 CMMs Used for Measuring Linear Dimensions《坐标测量机(CMMs)用验收试验和重新认证试验 第2_1.pdf

上传人:周芸 文档编号:456629 上传时间:2018-11-24 格式:PDF 页数:80 大小:1,011.80KB
下载 相关 举报
ASME B89 4 10360 2-2008 Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2 CMMs Used for Measuring Linear Dimensions《坐标测量机(CMMs)用验收试验和重新认证试验 第2_1.pdf_第1页
第1页 / 共80页
ASME B89 4 10360 2-2008 Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2 CMMs Used for Measuring Linear Dimensions《坐标测量机(CMMs)用验收试验和重新认证试验 第2_1.pdf_第2页
第2页 / 共80页
ASME B89 4 10360 2-2008 Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2 CMMs Used for Measuring Linear Dimensions《坐标测量机(CMMs)用验收试验和重新认证试验 第2_1.pdf_第3页
第3页 / 共80页
ASME B89 4 10360 2-2008 Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2 CMMs Used for Measuring Linear Dimensions《坐标测量机(CMMs)用验收试验和重新认证试验 第2_1.pdf_第4页
第4页 / 共80页
ASME B89 4 10360 2-2008 Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2 CMMs Used for Measuring Linear Dimensions《坐标测量机(CMMs)用验收试验和重新认证试验 第2_1.pdf_第5页
第5页 / 共80页
亲,该文档总共80页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2: CMMs Used for Measuring Linear DimensionsAN AMERICAN NATIONAL STANDARDASME B89.4.10360.2-2008ASME B89.4.10360.2-2008 Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2: CMMs

2、Used for Measuring Linear Dimensions Date of Issuance: July 11, 2008 This Technical Report will be revised when the Society approves the issuance of a new edition. There will be no addenda issued to this edition. ASME issues written replies to inquiries concerning interpretations of technical aspect

3、s of this Report. Interpretations are published on the ASME Website under the Committee Pages at http:/cstools.asme.org as they are issued. ASME is the registered trademark of The American Society of Mechanical Engineers. ASME does not “approve,” “rate”, or “endorse” any item, construction, propriet

4、ary device or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent

5、, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliate

6、d with industry is not to be interpreted as government or industry endorsement of this code or standard. ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations

7、 by individuals. No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. The American Society of Mechanical Engineers Three Park Avenue, New York, NY 10016-5990 Copyright 2008 by THE AMERICAN SOCIE

8、TY OF MECHANICAL ENGINEERS All rights reserved Printed in the U.S.A. iiiASME B89.4.10360.2 Acceptance test and reverification test for coordinate measuring machines (CMMs) Part 2: CMMs used for measuring linear dimensions. The ASME B89.4.10360.2 Technical Report is based on, and is compliant with, t

9、he finaldraft International Standard (FDIS) ISO 10360-2, expected to be published as anInternational Standard in 2009. The ISO FDIS text appears verbatim in this TechnicalReport. Whenever the phrase “International Standard” appears, it refers to the ISO 10360-2FDIS document. Additional requirements

10、and information specific to the ASMEB89.4.10360.2 Technical Report are included in bordered text boxes such as this one.Normative material is a fundamental part of the ASME B89.4.10360.2 Technical Report and,if applicable, supersedes the corresponding ISO 10360-2 normative text. In particular, there

11、are a few cases where text appearing in ISO 10360-2 is in conflict with the Normative text ofASME B89.4.10360.2, and accordingly the ASME B89.4.10360.2 requirements shall govern.The corresponding ISO text has been put into a “strikeout” (strikeout) font in those cases.Informative material in this Te

12、chnical Report is meant to provide additional benefit for thereader. The ISO text, figures, and tables have been reprinted in ASME B89.4.10360.2 withpermission of ANSI. ivINTENTIONALLY LEFT BLANK v Contents Page Foreword . vii Committee Roster . viii Introduction ix 1 Scope 1 2 Normative references

13、2 3 Terms and definitions . 2 4 Symbols 6 5 Environmental and metrological requirements 7 5.1 Environmental conditions 7 5.2 Operating conditions 9 5.3 Length measurement error, EL. 9 5.4 Repeatability range of the length measurement error, R0. 9 5.5 Workpiece loading effects 10 6 Acceptance tests a

14、nd reverification tests 10 6.1 General . 10 6.2 Principle 12 6.3 Length measurement error with zero ram axis stylus tip offset, E0. 12 6.3.1 General . 12 6.3.2 Measuring equipment . 12 6.3.3 Procedure. 13 6.3.4 Derivation of test results 15 6.4 Repeatability range of the length measurement error, R0

15、. 16 6.5 Length measurement error with ram axis stylus tip offset of length 150 mm, E15016 6.5.1 Measuring equipment . 16 6.5.2 Procedure. 16 6.5.3 Derivation of test results 19 6.6 Dual ram CMMs 19 6.6.1 Simplex operating mode. 19 6.6.2 Duplex operating mode. 19 7 Compliance with specifications. 20

16、 7.1 Acceptance test . 20 7.1.1 Acceptance criteria . 20 7.1.2 Data rejection and repeated measurements. 21 7.2 Reverification test . 27 8 Applications . 27 8.1 Acceptance test . 27 8.2 Reverification test . 27 8.3 Interim check . 28 9 Indication in product documentation and data sheets 28 Annex A (

17、informative) Interim check 29 A.1 Interim check of the CMM. 29 7.1.3 Thermal derating of specifications 23vi A.2 Interim testing and the comparison to specifications .29 A.2.1 General29 A.2.2 Interim testing using uni-directional artefacts30 Annex B (normative) Artefacts that represent a calibrated

18、test length 31 B.1 General31 B.2 Bi-directional measurements32 B.2.1 General32 B.2.2 Gauge blocks32 B.2.3 Step gauges measured in a bi-directional manner.32 B.2.4 Ball bars / ball plates measured in a bi-directional manner 32 B.2.5 Laser interferometry with contact probing measured in a bi-direction

19、al manner 32 B.3 Uni-directional measurements (must be supplemented with bi-directional measurements).33 B.3.1 General33 B.3.2 Calibrated test length composed of uni-directional and short gauge block measurements33 B.3.3 Artefacts for uni-directional measurements .34 Annex C (informative) Alignment

20、of gauges36 C.1 General36 C.2 Parallel face gauges.36 C.3 Ball bar/ball plate gauges36 Annex D (normative) Mathematical adjustments to Low CTE artefacts .38 D.1 General38 D.2 Requirements .38 Annex E (informative) Location of the single stylus probing test Annex F (informative) Relation to the GPS m

21、atrix model F.1 Information about this part of ISO 10360 and its use F.2 Position in the GPS matrix model F.3 Related standards Bibliography 67 Note: Annexes E and F originally in the ISO Standard are omitted in the B89 Technical Reportbecause they pertain only to the location of other ISO documents

22、 and are not relevant to thisReport. Annex E (normative) Test uncertainty .40Annex F (normative) Traceability of calibrated test lengths 52Annex G (normative) Decision rule for conformance testing .54Annex H (informative) Interim testing of CMM systems .55Annex I (normative) ASME B89.4.10360.2 Data

23、sheet 65Annex J (informative) Figures 12, 13 and 14 from ISO 10360-1:2000 66vii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through

24、ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates

25、 closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards.

26、 Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this

27、document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10360-2 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification. This third edition cancels and replaces the

28、second edition (2001) which has been technically revised. ISO 10360 consists of the following parts, under the general title Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM): Part 1: Vocabulary Part 2: CMMs used for measuring linear

29、 dimensions Part 3: CMMs with the axis of a rotary table as the fourth axis Part 4: CMMs used in scanning measuring mode Part 5: CMMs using single and multiple stylus contacting probing systems Part 6: Estimation of errors in computing of Gaussian associated features viii ASME B89 Committee Dimensio

30、nal Metrology STANDARDS COMMITTEE OFFICERS B. Parry, Chair D. Beutel, Vice Chair F. Constantino, Staff Secretary STANDARDS COMMITTEE PERSONNEL D. Beutel, Caterpillar, Inc. J. B. Bryan, Bryan Associates T. Carpenter, USAF, Newark AF Base T. Charlton, Charlton Associates D. Christy, Mahr Federal F. Co

31、nstantino, The American Society of Mechanical Engineers G. Hetland, International Institute of Geometric Dimensioning and Tolerancing R. J. Hocken, University of North Carolina at Charlotte M. P. Krystek, Physikalisch-Technische Bundesanstalt M. Liebers, Professional Instruments Co. E. Morse, Univer

32、sity of North Carolina at Charlotte B. Parry, The Boeing Co. S. D. Phillips, National Institute of Standards and Technology J. G. Salsbury, Mitutoyo America Corp. B. R. Taylor, Renishaw, PLC R. L. Thompson, USAF, Newark AF Base R. B. Hook, Honorary Member, Metcon SUBCOMMITTEE 4 COORDINATE MEASURING

33、TECHNOLOGY S. D. Phillips, Chair, National Institute of Standards and Technology B. Borchardt, National Institute of Standards and Technology T. Carpenter, USAF, Newark AF Base T. Charlton, Charlton Associates K. Harding, GE-CRD R. Hocken, University of North Carolina at Charlotte J. Hooker, RDM, In

34、c. E. Morse, University of North Carolina at Charlotte B. Parry, The Boeing Co. P. Pereira, Caterpillar, Inc. J. B. Ross, GE Aircraft Engines J. G. Salsbury, Mitutoyo America Corp. J. Schmidl, Optical Gaging Products, Inc. C. M. Shakarji, National Institute of Standards and Technology B. R. Taylor,

35、Renishaw, PLC ix Introduction This part of ISO 10360 is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO/TR 14638). It influences link 5 of the chains of standards on size, distance, radius, angle, form, orientation, location, run-out and da

36、tums. For more detailed information of the relation of this part of ISO 10360 to other standards and the GPS matrix model see Annex F. The tests of this part of ISO 10360-2 have three technical objectives, 1) to test the error of indication of a calibrated test length using a probing system without

37、any ram axis stylus tip offset, 2) to test the error of indication of a calibrated test length using a probing system with a specified ram axis stylus tip offset, and 3) to test the repeatability of measuring a calibrated test length. The benefits of these tests are that the measured result has a di

38、rect traceability to the unit length, the meter, and that it gives information on how the CMM will perform on similar length measurements. Clause 3 in this part of ISO 10360 contains definitions that supersede similar definitions in ISO 10360-1:2000. The revised definitions are required to avoid an

39、ambiguity that would otherwise have been introduced with this issue of ISO 10360-2. Also, definition 3.6 supersedes effectively an identical definition in ISO 10360-1:2000, because the symbols used have been revised and expanded for clarification. Informative The ASME B89.4.10360.2 Technical Report

40、does not include the ISO GPS matrix; for informationon this topic see the appropriate ISO documents for this material. Informative Definitions that are specific to the ASME B89.4.10360.2 Report are included in bordered textboxes. Informative Within the ISO 10360-2 text, a comma is used to represent

41、a decimal. For example, 0,5 would bethe decimal form of . Similarly, the ISO 10360-2 text contains spellings that are different fromAmerican English usage (e.g., artefact). These are left unchanged in this Report. x INTENTIONALLY LEFT BLANK ASME B89.4.10360.2-2008 1 Geometrical Product Specification

42、s (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring linear dimensions 1 Scope This part of ISO 10360 specifies the acceptance tests for verifying the performance of a CMM used for measuring linear dimensions as stated by the manufacture

43、r. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests given in this part of ISO 10360 are applicable only to Cartesian CMMs using contacting probing systems of any type operating in the discrete

44、-point probing mode. This International Standard does not explicitly apply to: non-cartesian CMMs, however, the parties may apply this part of 10360 to non-Cartesian CMMs by mutual agreement, CMMs using optical probing, however, the parties may apply this approach to optical CMMs by mutual agreement

45、. This International Standard specifies performance requirements that can be assigned by the manufacturer or the user of a CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, rules for proving conformance, and applications for which the acc

46、eptance and reverification tests can be used. Informative For information on non-Cartesian CMMs, see ASME B89.4.22 regarding articulating arm CMMsand ASME B89.4.19 for laser trackers. Informative ASME B89.4.10360.2 provides a well defined set of specifications for a CMM manufacturer todescribe their

47、 CMM performance and for users to verify the specified performance. This Reportdoes not mandate testing (by either the manufacturer or the user) to verify CMM performance.The amount of testing, and which party will bear the cost of testing, is a business decision andmust be negotiated between the tw

48、o parties. ASME B89.4.10360.2-2008 2 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the cited editions apply. For undated references, the latest edition of the referenced document (including any amendments)

49、 applies. ISO 10360-1:2000, Geometrical Product Specifications (GPS) Acceptance and reverification test for coordinate measuring machines (CMM) Part 1: Vocabulary ISO 14253-1:1998, Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for proving conformance or non-conformance with specifications ISO 14660-1:1999, Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions ISO/TS 23165:200

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1