1、Designation: E2334 09 (Reapproved 2013)1An American National StandardStandard Practice forSetting an Upper Confidence Bound For a Fraction orNumber of Non-Conforming items, or a Rate of Occurrencefor Non-conformities, Using Attribute Data, When There is aZero Response in the Sample1This standard is
2、issued under the fixed designation E2334; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial chan
3、ge since the last revision or reapproval.1NOTESection 3 was editorially corrected in August 2013.1. Scope1.1 This practice presents methodology for the setting of anupper confidence bound regarding a unknown fraction orquantity non-conforming, or a rate of occurrence fornonconformities, in cases whe
4、re the method of attributes isused and there is a zero response in a sample. Three cases areconsidered.1.1.1 The sample is selected from a process or a very largepopulation of discrete items, and the number of non-conforming items in the sample is zero.1.1.2 A sample of items is selected at random f
5、rom a finitelot of discrete items, and the number of non-conforming itemsin the sample is zero.1.1.3 The sample is a portion of a continuum (time, space,volume, area etc.) and the number of non-conformities in thesample is zero.1.2 Allowance is made for misclassification error in thisstandard, but o
6、nly when misclassification rates are well under-stood or known and can be approximated numerically.2. Referenced Documents2.1 ASTM Standards:2E141 Practice for Acceptance of Evidence Based on theResults of Probability SamplingE456 Terminology Relating to Quality and StatisticsE1402 Guide for Samplin
7、g DesignE1994 Practice for Use of Process Oriented AOQL andLTPD Sampling PlansE2586 Practice for Calculating and Using Basic Statistics2.2 ISO Standards:ISO 3534-1 StatisticsVocabulary and Symbols, Part 1:Probability and General Statistical Terms3ISO 3534-2 StatisticsVocabulary and Symbols, Part 2:S
8、tatistical Quality Control3NOTE 1Samples discussed in this standard should meet the require-ments (or approximately so) of a probability sample as defined inTerminologies E1402 or E456.3. Terminology3.1 Definitions:3.1.1 Terminology E456 provides a more extensive list ofterms in E11 standards.3.1.2
9、attributes, method of, nmeasurement of quality bythe method of attributes consists of noting the presence (orabsence) of some characteristic or attribute in each of the unitsin the group under consideration, and counting how many ofthe units do (or do not) possess the quality attribute, or howmany s
10、uch events occur in the unit, group or area.3.1.3 confidence bound, nsee confidence limit. E25863.1.4 confidence coeffcient, nthe value, C, of the prob-ability associated with a confidence interval or statisticalcoverage interval. It is often expressed as a percentage.ISO 3534-1, E25863.1.5 confiden
11、ce interval, nan interval estimate of apopulation parameter, calculated such that there is a givenlong-run probability that the parameter is included in theinterval. E25863.1.5.1 DiscussionA one-sided confidence interval is onefor which one of the limits is plus infinity, minus infinity, or anatural
12、 fixed limit (such as zero).3.1.6 confidence level, nsee confidence coeffcient. E25861This practice is under the jurisdiction ofASTM Committee E11 on Quality andStatistics and is the direct responsibility of Subcommittee E11.30 on StatisticalQuality Control.Current edition approved April 1, 2013. Pu
13、blished April 2013. Originallyapproved in 2003. Last previous edition approved in 2013 as E2334 13. DOI:10.1520/E2334-09R13E01.2For referenced ASTM Standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandardsvolume information,
14、 refer to thestandards Document Summary page onthe ASTM website.3Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036, http:/www.ansi.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United St
15、ates13.1.7 confidence limit, nthe upper or lower limit of aconfidence interval. E25863.1.8 item, nan object or quantity of material on which aset of observations can be made.3.1.8.1 DiscussionAs used in this standard, “set” denotesa single variable (the defined attribute). The term “samplingunit” is
16、 also used to denote an “item” (see Practice E141).3.1.9 non-conforming item, nan item containing at leastone non-conformity. ISO 3534-23.1.9.1 DiscussionThe term “defective item” is also usedin this context.3.1.10 non-conformity, nthe non-fulfillment of a specifiedrequirement. ISO 3534-23.1.10.1 Di
17、scussionThe term “defect” is also used in thiscontext.3.1.11 population, nthe totality of items or units ofmaterial under consideration. E25863.1.12 sample, na group of observations or test resultstaken from a larger collection of observations or test results ,which serves to provide information tha
18、t may be used as a basisfor making a decision concerning the larger collection. E25863.2 Definitions of Terms Specific to This Standard:3.2.1 probability sample, na sample of which the sam-pling units have been selected by a chance process. At eachstep of selection, a specified probability of select
19、ion can beattached to each sampling unit available for selection. E14023.2.2 zero response, nin the method of attributes, thephrase used to denote that zero non-conforming items or zeronon-conformities were found (observed) in the item(s), unit,group, or area sampled.3.3 Symbols:3.3.1 Athe assurance
20、 index, as a percent or a probabilityvalue.3.3.2 Cconfidence coefficient as a percent or as a prob-ability value.3.3.3 Cdthe confidence coefficient calculated that a pa-rameter meets a certain requirement, that is, that p p0, that D D0or that 0, when there is a zero response in the sample.3.3.4 Dthe
21、 number of non-conforming items in a finitepopulation containing N items.3.3.5 D0a specified value of D for which a researcher willcalculate a confidence coefficient for the statement, D D0,when there is a zero response in the sample.3.3.6 Duthe upper confidence bound for the parameter D.3.3.7 Nthe
22、number of items in a finite population.3.3.8 nthe sample size, that is, the number of items in asample.3.3.9 nRthe sample size required.3.3.10 pa process fraction non-conforming.3.3.11 p0a specified value of p for which a researcher willcalculate a confidence coefficient, for the statement p p0,when
23、 there is a zero response in the sample.3.3.12 puthe upper confidence bound for the parameter p.3.3.13 the mean number of non-conformities (or events)over some area of interest for a Poisson process.3.3.14 0a specific value of for which a researcher willcalculate a confidence coefficient for the sta
24、tement, 0,when there is a zero response in the sample.3.3.15 uthe upper confidence bound for the parameter .3.3.16 1the probability of classifying a conforming itemas non-conforming; or of finding a nonconformity where noneexists.3.3.17 2the probability of classifying a non-conformingitem as conform
25、ing; or of failing to find a non-conformitywhere one should have been found.4. Significance and Use4.1 In Case 1, the sample is selected from a process or avery large population of interest. The population is essentiallyunlimited, and each item either has or has not the definedattribute. The populat
26、ion (process) has an unknown fraction ofitems p (long run average process non-conforming) having theattribute. The sample is a group of n discrete items selected atrandom from the process or population under consideration,and the attribute is not exhibited in the sample. The objectiveis to determine
27、 an upper confidence bound, pu, for the unknownfraction p whereby one can claim that p puwith someconfidence coefficient (probability) C. The binomial distribu-tion is the sampling distribution in this case.4.2 In Case 2, a sample of n items is selected at randomfrom a finite lot of N items. Like Ca
28、se 1, each item either hasor has not the defined attribute, and the population has anunknown number, D, of items having the attribute. The sampledoes not exhibit the attribute. The objective is to determine anupper confidence bound, Du, for the unknown number D,whereby one can claim that D Duwith so
29、me confidencecoefficient (probability) C. The hypergeometric distribution isthe sampling distribution in this case.4.3 In Case 3, there is a process, but the output is acontinuum, such as area (for example, a roll of paper or othermaterial, a field of crop), volume (for example, a volume ofliquid or
30、 gas), or time (for example, hours, days, quarterly, etc.)The sample size is defined as that portion of the “continuum”sampled, and the defined attribute may occur any number oftimes over the sampled portion. There is an unknown averagerate of occurrence, , for the defined attribute over the sampled
31、interval of the continuum that is of interest. The sample doesnot exhibit the attribute. For a roll of paper this might beblemishes per 100 ft2; for a volume of liquid, microbes percubic litre; for a field of crop, spores per acre; for a timeinterval, calls per hour, customers per day or accidents p
32、erquarter. The rate, , is proportional to the size of the interval ofinterest. Thus, if = 12 blemishes per 100 ft2of paper, this isequivalent to 1.2 blemishes per 10 ft2or 30 blemishes per 250ft2. It is important to keep in mind the size of the interval in theanalysis and interpretation. The objecti
33、ve is to determine anupper confidence bound, u, for the unknown occurrence rate ,whereby one can claim that uwith some confidencecoefficient (probability) C. The Poisson distribution is thesampling distribution in this case.E2334 09 (2013)124.4 Avariation on Case 3 is the situation where the sampled
34、“interval” is really a group of discrete items, and the definedattribute may occur any number of times within an item. Thismight be the case where the continuum is a process producingdiscrete items such as metal parts, and the attribute is definedas a scratch. Any number of scratches could occur on
35、anysingle item. In such a case the occurrence rate, , might bedefined as scratches per 1000 parts or some similar metric.4.5 In each case a sample of items or a portion of acontinuum is examined for the presence of a defined attribute,and the attribute is not observed (that is, a zero response). The
36、objective is to determine an upper confidence bound for eitheran unknown proportion, p (Case 1), an unknown quantity, D(Case 2), or an unknown rate of occurrence, (Case 3). In thisstandard, confidence means the probability that the unknownparameter is not more than the upper bound. More generally,th
37、ese methods determine a relationship among sample size,confidence and the upper confidence bound. They can be usedto determine the sample size required to demonstrate a specificp, D or with some degree of confidence. They can also beused to determine the degree of confidence achieved indemonstrating
38、 a specified p, D or .4.6 In this standard allowance is made for misclassificationerror but only when misclassification rates are well understoodor known, and can be approximated numerically.4.7 It is possible to impose the language of classicalacceptance sampling theory on this method. Terms such a
39、s LotTolerance Percent Defective, Acceptable Quality Level, Con-sumer Quality Level are not used in this standard. For moreinformation on these terms, see Practice E1994.5. Procedure5.1 When a sample is inspected and a zero response isexhibited with respect to a defined attribute, we refer to thisev
40、ent as “all_zeros.” Formulas for calculating the probabilityof “all_zeros” in a sample are based on the binomial, thehypergeometric and the Poisson probability distributions.When there is the possibility of misclassification error, adjust-ments to these distributions are used. This practice will cla
41、rifywhen each distribution is appropriate and how misclassificationerror is incorporated. Three basic cases are considered asdescribed in Section 4. Formulas and examples for each caseare given below. Mathematical notes are given in AppendixX1.5.2 In some applications, the measurement method isknown
42、 to be fallible to some extent resulting in a significantmisclassification error. If experiments with repeated measure-ments have established the rates of misclassification, and theyare known to be constant, they should be included in thecalculating formulas. Two misclassification error probabilitie
43、sare defined for this practice:5.2.1 Let 1be the probability of reporting a non-conforming item when the item is really conforming.5.2.2 Let 2be the probability of reporting a conformingitem when the item is really non-conforming.5.2.3 Almost all applications of this standard require that 1be known
44、to be 0 (see 6.1.2).5.3 Formulas for upper confidence bounds in three cases:5.3.1 Case 1The item is a completely discrete object andthe attribute is either present or not within the item. Only oneresponse is recorded per item (either go or no-go). The sampleitems originate from a process and hence t
45、he future populationof interest is potentially unlimited in extent so long as theprocess remains in statistical control. The item having theattribute is often referred to as a defective item or a non-conforming item or unit. The sample consists of n randomlyselected items from the population of inte
46、rest. The n items areinspected for the defined attribute. The sampling distribution isthe binomial with parameters p equal to the process (popula-tion) fraction non-conforming and n the sample size. Whenzero non-conforming items are observed in the sample (theevent “all_zeros”), and there are no mis
47、classification errors, theupper confidence bound, pu, at confidence level C (0 C 1),for the population proportion non-conforming is:pu5 1 2 =n1 2 C (1)5.3.1.1 Table 1contains the calculated upper confidencebound for the process fraction non-conforming when x=0non-conforming items appear in a sample
48、of size n. Confidenceis 100C%. For example, if n=250 objects are sampled and thereare x=0 non-conforming objects in the sample, then the upper95% confidence bound for the process fraction non-conformingis approximately 0.01191 or 1.191% non-conforming. Eq 1was applied.TABLE 1 Upper 100C% Confidence
49、Bound, pu, for the ProcessFraction Non-Conforming, p, When Zero non-conforming Unitsappear in a sample of Size, nn C=0.90 C=0.95 C=0.995 0.369043 0.450720 0.60189310 0.205672 0.258866 0.36904315 0.142304 0.181036 0.26435820 0.108749 0.139108 0.20567230 0.073881 0.095034 0.14230440 0.055939 0.072158 0.10874950 0.045007 0.058155 0.08798960 0.037649 0.048703 0.07388170 0.032359 0.041893 0.06367180 0.028372 0.036754 0.05593990 0.025260 0.032738 0.049881100 0.022763 0.029513 0.045007150 0.015233 0.019
