ASTM F1301-2017 Standard Practice for Labeling Chemical Protective Clothing《标记化工防护服的标准操作规程》.pdf

上传人:brainfellow396 文档编号:534598 上传时间:2018-12-06 格式:PDF 页数:3 大小:77.05KB
下载 相关 举报
ASTM F1301-2017 Standard Practice for Labeling Chemical Protective Clothing《标记化工防护服的标准操作规程》.pdf_第1页
第1页 / 共3页
ASTM F1301-2017 Standard Practice for Labeling Chemical Protective Clothing《标记化工防护服的标准操作规程》.pdf_第2页
第2页 / 共3页
ASTM F1301-2017 Standard Practice for Labeling Chemical Protective Clothing《标记化工防护服的标准操作规程》.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Designation: F1301 17Standard Practice forLabeling Chemical Protective Clothing1This standard is issued under the fixed designation F1301; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in paren

2、theses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThis practice is intended to provide guidance on the minimum label information for chemicalprotective clothing.1. Scope1.1 This practice covers the in

3、formational content of labelsin or on chemical protective clothing. This practice alsoaddresses putting label content on chemical protective clothingpackaging when it is not practical to attach the label directly tothe chemical protective clothing or print it on the chemicalprotective clothing item

4、based on the size or type of theproduct.1.2 This practice describes the recommended format andminimal content of the information to be included on the labelsused for chemical protective clothing.1.2.1 For the purposes of this practice, chemical protectiveclothing includes but is not limited to: suit

5、s, garments, andpartial body garments such as hoods, aprons, sleeve protectors,gloves, and footwear.1.2.2 Protective clothing is defined as any single item orcombination of items used for the purpose of isolating parts ofthe body from direct contact with a potential hazard. It does notinclude indivi

6、dual parts of a protective clothing item designedto be worn as part of another item (for example, a faceshield orlens) unless it may be worn independently of the other itemsand still be used in a protective manner. For example, a gloveor boot, unless permanently attached to a garment or suit,would b

7、e considered a protective clothing item requiringlabeling, while a visor or vent valve would not. In summary,the intent of this practice is to only require labeling of parts ofan ensemble that can be used independently for the protectionof the user.1.3 This practice does not cover user information p

8、rovidedby means other than item labeling such as instructions,informational packets, brochures, or other written means. Userinformation is partly addressed in Practice F2061.1.4 This practice excludes those items covered under 16CFR 303 unless specifically designed for use as chemicalprotective clot

9、hing.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety, health, and environmental practices and deter-mine the applicability of regulatory limitations prior t

10、o use.1.6 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recom-mendations issued by the World Trade Organization TechnicalBarri

11、ers to Trade (TBT) Committee.2. Referenced Documents2.1 ASTM Standards:2F2061 Practice for Chemical Protective Clothing: Wearing,Care, and Maintenance Instructions2.2 U.S. Code of Federal Regulations:316 CFR 303 Textile Fiber Products Identification Act3. Significance and Use3.1 This practice contai

12、ns the recommendations for minimalinformational requirements for the identification of chemicalprotective clothing items. It is intended to provide the user withsome of the basic information necessary for the proper selec-tion and use of the chemical protective clothing.3.2 For some items of chemica

13、l protective clothing, such asdisposable chemical protective gloves, it is recognized that it isnot practical that the labeling information be provided directly1This practice is under the jurisdiction of ASTM Committee F23 on PersonalProtective Clothing and Equipment and is the direct responsibility

14、 of SubcommitteeF23.30 on Chemicals.Current edition approved Nov. 1, 2017. Published November 2017. Originallyapproved in 1990. Last previous edition approved in 2011 as F1301 90 (2011)1.DOI: 10.1520/F1301-17.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Custom

15、er Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from U.S. Government Printing Office Superintendent of Documents,732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401, http:/www.acce

16、ss.gpo.gov.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopme

17、nt of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.1on the product. Therefore, it is permissible that this informationbe provided on the direct packaging that contains the product.As an example, it is possible

18、to put the recommended productinformation on the dispenser box that contains multiple pairs ofdisposable chemical protective gloves.3.3 Additional information beyond the content recom-mended by this practice is permitted to be applied to the label.This additional label content can include statements

19、 indicatingcompliance with specific standards, warnings, limitations as-sociated with the product, and certain types of use, care, andmaintenance information as addressed in Practice F2061.3.4 Rules and regulations in Title 16 Code of FederalRegulations Part 303 cover the identification of fibers in

20、 textileproducts, specifically the disclosure of the fiber content and themanner of labeling products for purposes of applying tariffs onimported products and for informing the consumer. Thispractice is not intended to be a replacement for the require-ments in 16 CFR 303, which may still apply to ce

21、rtain types ofchemical protective clothing.4. Minimal Informational Requirements4.1 The minimum informational requirements for labelingof chemical protective clothing include an identification of theitem, the manufacturers or distributors name, information onthe base composition of the item (materia

22、l of construction), andsize.4.2 The following label elements represent the minimumrequirements:4.2.1 IdentificationProvide the name or trade name, stylenumber, or other description for the item (such as catalognumber, etc.).4.2.2 Manufacturers or Distributors NameProvide thename of the manufacturer

23、or distributor of the item. Theprovision of the manufacturers address, including country ofmanufacture or contact information, is considered optional butis recommended.4.2.3 Base Material CompositionProvide the primary ma-terial composition of the clothing item in terms of the materialor polymer typ

24、e (for example, butyl rubber or flash-spunpolyester). Generic names identifying the material arepreferred, but specific material trade names are also permitted.4.2.3.1 Where the clothing composition includes multiplematerials used in its construction, identify each major materialseparately.4.2.3.2 I

25、f the clothing item is of a multilayered construction,identify the outer layer first followed by inner layers.4.2.3.3 If the base material involves a blend of differentmaterials, identify the component materials in order of highestpercentage components first.4.2.3.4 If the base material includes mul

26、tiple material com-posites or coatings, identify the individual layers from theexterior to the interior of the specific material. For example, fora coated material with a coating on the exterior, the materialwould be identified as PVC/polyester.4.2.4 SizeIndicate clothing item sizing using the manuf

27、ac-turers size designation using a standard sizing system (forexample, small, medium, large, or extra large), a numericalsizing system based on a conventional indication of sizes for aparticular item (for example, 6, 7, 8, 9, 10, or 11 for gloves orshoe size and width for footwear), or a wearer dime

28、nsion-basedsize such as chest size in inch-pound or SI (metric) units (forexample, 42 to 44 in. (107 to 112 cm).4.2.4.1 It is recommended that manufacturers provide somebasis of their sizing system in associated user information,specifically indicating how the appropriate size of the chemicalprotect

29、ive clothing items should be selected.4.2.4.2 For chemical protective clothing items available inone size only, identify the size as “one size fits all” or “one sizefits most.”5. Label Format5.1 It is permitted that the manufacturer or distributor utilizeany form or type of labeling method for provi

30、ding the requiredinformation on a label and affixing that label to the product.Labeling practices include silk screen impressions, embossing(raised lettering), attached (sewn-on) tags, or any other meansof labeling. Integral or attached labels are recommended.5.2 Create labels that are durable over

31、the expected servicelife of the chemical protective clothing item.5.2.1 Where products are expected to be used or cleaned,ensure that labels remain legible through the recommendedcleaning or re-servicing procedures for the chemical protectiveclothing item.5.3 Prepare label printing in a sufficient s

32、ize to enable theuser to easily read the provided information. A minimumletter/symbol size of 1.6 mm (116 in.) is recommended.5.4 Locate the product label in a place where the label willbe conspicuous for identifying the protective clothing item butnot in an area that interferes with the use of the

33、product orcauses discomfort to the user.5.5 Though it is preferred that the minimum requiredinformation for chemical protective clothing labels be on onelabel, it is permitted to use multiple labels to meet therecommended requirements of this practice.5.6 For very small items of chemical protective

34、clothing,where it is impractical to place labeling information directly onthe product, placement of the minimum label content on thepackaging directly containing the respective chemical protec-tive clothing items is permitted.5.7 Where multiple items of chemical protective clothingare worn together

35、as an ensemble, label each separate item ofchemical protective clothing that could be worn independentlyfor the protection of the user (for example, hoods,overgarments, gloves, boots, etc.).5.7.1 Include a label listing all related chemical protectiveclothing items for those ensembles that are relia

36、nt on the use ofspecific chemical protective clothing items for the overallprotection provided by the ensemble.5.8 Appendix X1 shows an example of a simple label thatfollows the minimal information requirements from 4.1 of thispractice.F1301 1726. Keywords6.1 chemical protective clothing; labeling;

37、protective cloth-ingAPPENDIX(Nonmandatory Information)X1. EXAMPLE LABELASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of

38、any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are

39、 invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not rece

40、ived a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) o

41、f this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ X1.1 Example LabelF1301 173

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > ASTM

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1