1、 ATIS-0300091.2018 (Revision of ATIS-0300091.2012) American National Standard for Telecommunications Structure for Global Serialization of Information and Communications Technology (ICT) Network Infrastructure Equipment Alliance for Telecommunications Industry Solutions Approved March 2018 American
2、National Standards Institute, Inc. Abstract This standard provides a format and structure for assigning serial numbers to telecommunications infrastructure equipment. ATIS-0300091.2018 ii Foreword The information contained in this Foreword is not part of this American National Standard (ANS) and has
3、 not been processed in accordance with ANSIs requirements for an ANS. As such, this Foreword may contain material that has not been subjected to public review or a consensus process. In addition, it does not contain requirements necessary for conformance to the Standard. This document is entitled St
4、ructure for Global Serialization of Information and Communications Technology (ICT) Network Infrastructure Equipment. This American National Standard provides a format and structure for assigning serial numbers to telecommunications infrastructure equipment. This standard contains sections that cove
5、r the purpose and scope of this information. This standard specifies the serial number structure using a unique Issuing Agency Code per ISO/IEC 15459-2, a unique Manufacturer Identification Segment assigned by the Issuing Agency and a unique serial number, assigned by the company designated by the M
6、anufacturer Identification Segment. This standard does not replace the Electronic Serial Number (ESN) or the Mobile Equipment Identifier (MEID) which conform to the cellular radio telecommunications intersystem operations family of standards, TIA/EIA-41; advanced mobile phone service (AMPS), TIA/EIA
7、-553 and subsequent revisions; narrowband analog mobile phone service (NAMPS), TIA/EIA-691 and subsequent revisions; code division multiple access (CDMA), TIA/EIA-95, TIA/EIA/IS-2000 and subsequent revisions; and time division multiple access (TDMA), TIA/EIA-136. The Alliance for Telecommunication I
8、ndustry Solutions (ATIS) serves the public through improved understanding between carriers, customers, and manufacturers. The Telecom Management and Operations Committee (TMOC) formerly T1M1 develops operations, administration, maintenance and provisioning standards, and other documentation related
9、to Operations Support System (OSS) and Network Element (NE) functions and interfaces for communications networks - with an emphasis on standards development related to U.S.A. communication networks in coordination with the development of international standards. ANSI guidelines specify two categorie
10、s of requirements: mandatory and recommendation. The mandatory requirements are designated by the word shall and recommendations by the word should. Where both a mandatory requirement and a recommendation are specified for the same criterion, the recommendation represents a goal currently identifiab
11、le as having distinct compatibility or performance advantages. Suggestions for improvement of this document are welcome. They should be sent to the Alliance for Telecommunications Industry Solutions, TMOC, 1200 G Street NW, Suite 500, Washington, DC 20005. At the time it approved this document, TMOC
12、, which is responsible for the development of this Standard, had the following leadership: P. Galarza, TMOC Chair (iconectiv) The Telecom Management and Operations Committee (TMOC) was responsible for the development of this document. ATIS-0300091.2018 iii Table of Contents 1 Scope, Purpose, advance
13、d mobile phone service (AMPS), TIA/EIA-553, and subsequent revisions; narrowband analog mobile phone service (NAMPS), TIA/EIA-691, and subsequent revisions; code division multiple access (CDMA), TIA/EIA-95, TIA/EIA/IS-2000, and subsequent revisions; and Time Division Multiple Access (TDMA), TIA/EIA-
14、136. 1.2 Purpose The purpose of this standard is to provide a uniform method of creating the globally unique serial identification for the telecommunications industry by recommending the code structure for the unique serial identification used by manufacturers, suppliers, and related services compan
15、ies to uniquely serialize products bearing the same manufacturer identification within a company. 2 References The following standards contain provisions which, through reference in this text, constitute provisions of this American National Standard. At the time of publication, the editions indicate
16、d were valid. All standards are subject to revision, and parties to agreements based on this American National Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. 2.1 Normative References ANS MH10.8.2, Data Application Identif
17、ier Standard.1,2ATIS-0300220, Structure for the Representation of the Communications Industry Manufacturers, Suppliers, and Related Service Companies for Information Exchange.31This document is available from the American National Standards Institute (ANSI), 25 West 43rd Street, New York, NY 10036.
18、Telephone: (212) 642-4900. Fax: (212) 398-0023. Web site: . 2For current information or requests for new data identifiers, contact the Material Handling Institute (MHI) using the DI Request Form: . 3This document is available from the Alliance for Telecommunications Industry Solutions (ATIS), 1200 G
19、 Street N.W., Suite 500, Washington, DC 20005. ATIS-0300091.2018 2 ATIS-0300078, Serialization Guideline for Telecommunications Network Infrastructure Equipment.3EDIFICE Guideline Global Unique Identification scheme, (GUIx) Version 3.0.4GS1 General Specifications.5ISO/IEC 15459-2, Information techno
20、logy - Unique identification Part 2: Registration Procedures.6 ISO/IEC 15459-4, Information technology - Unique identifiers Part 4: Individual items.6ISO/IEC 28219, Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols.6 2.2 Informative References ATIS-030
21、0038, Product Marking Implementation Guide.3ATIS-0300005, Product Identification Coding Schemes.3ATIS-0300096, RFID Guideline for Product, Product Package and Transport Unit Tagging.33 Definitions, Acronyms, and 2) the Serial Number Segment. The combination of these two segments ensures uniqueness w
22、ithin a company. The maximum length of the unique serialization identification shall be 25 data characters (ANSI MH10.8.2. does not specify a length for unique serial identification for the Data Identifier specified in this document). 4This document available from EDIFICE, rue du Rhone 100, Case pos
23、tal 3762, 1211 Geneva 3, Switzerland. . 5Available from Blue Tower, Avenue Louise, 326 BE 1050 Brussels, Belgium; Phone: +32 2.788.7800 Fax: +32 2.788.7899, E-mail: , Web Site: . 6This document is available from the International Organization for Standardization. ATIS-0300091.2018 3 To make the uniq
24、ue serial identification globally unique, the Manufacturer Identification Segment includes an Issuing Agency Code (per ISO/IEC 15459-2) and the Issuing Agency-assigned code for the manufacturer/supplier/company. This is the standard approach as specified in ISO/IEC 15459-4 and ISO/IEC 28219. ISO/IEC
25、 15459 refers to the unique serial identification for an item as the Unique Item Identifier (UII). 5 Unique Serial Identification Length The maximum length of the unique serialization identification shall be 25 data characters. 6 Unique Serial Identification Data Composites This standard allows for
26、the use of four options for representing unique serial identification: 1. The ATIS-0300220 Company Identifier; 2. The GS1 Company Prefix; 3. The Dun or 4. The EDIFICE Company Identification Number. Independent of the format used, all segments are required to ensure Globally Unique Serial Identificat
27、ion. 6.1 ATIS-0300220 Company Identifier 6.1.1 Code Structure The ATIS-0300220 Company Identifier consists of a Manufacturer Identification Segment comprised of the ISO/IEC 15459-2 Issuing Agency Code, “LB” assigned to Telcordia Technologies dba iconectiv, and a four (4) alphabetic character manufac
28、turer code assigned by Telcordia Technologies dba iconectiv (as defined in ATIS-0300220), followed by a one (1) to sixteen (16) alphanumeric character Serial Number Segment, represented in the following format: SEGMENT (POSITIONS) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Iss
29、uing Agency Code L B Company Identification No. Alphabetic Serial Number Segment Alpha-numeric 6.1.2 Assignment The code is assigned by the Maintenance Agent (Telcordia Technologies dba iconectiv). 6.1.3 Use The code identifies the manufacturer, supplier, or related service company providing unique
30、identity within the serialization process. ATIS-0300091.2018 4 6.2 GS1 (formerly EAN.UCC) Company Prefix 6.2.1 Code Structure The GS1 Company Prefix code consists of a seven (7) to eleven (11) numeric Manufacturer Identification Segment followed by a Serial Number Segment consisting of one (1) to ei
31、ghteen (18) alphanumeric character. Due to the variable length of the Manufacturer Identification Segment, the maximum length of the Serial Number Segment is of variable length as well; however, the total of both segments shall not exceed 25 characters. Consult GS1 or the GS1 General Specifications
32、for additional information (see clause 2, Normative References). Option SEGMENT (POSITIONS) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 1 Manufacturer Identification Number (7 characters) Numeric Serial Number Segment Alpha-numeric 2 Manufacturer Identification Number (8 charac
33、ters) NumericSerial Number Segment Alpha-numeric 3 Manufacturer Identification Number (9 characters) Numeric Serial Number Segment Alpha-numeric 4 Manufacturer Identification Number (10 characters) NumericSerial Number Segment Alpha-numeric 5 Manufacturer Identification Number (11 characters) Numeri
34、c Serial Number Segment Alpha-numeric 6.2.2 Assignment The number is assigned by a GS1 International Numbering Organization. 6.2.3 Use The GS1 Company Prefix is worldwide identification of a company, as defined by the GS1 General Specifications. A company may have multiple companies GS1 numbers that
35、 are unique worldwide. 6.3 D-U-N-S Number 6.3.1 Code Structure The Dun & Bradstreet (D&B) D-U-N-S Number consists of a Manufacturer Identification Segment comprised of the ISO/IEC 15459-2 Issuing Agency Code, “UN” for Dun & Bradstreet, and a nine (9) non-indicative numeric D&B D-U-N-S Number, follow
36、ed by a one to fourteen (14) alphanumeric character Serial Number Segment, represented in the following format: ATIS-0300091.2018 5 SEGMENT (POSITIONS) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Issuing Agency Code U N Company Identification No. Numeric Serial Number Segment A
37、lpha-numeric 6.3.2 Assignment The D-U-N-S Number is assigned by the ISO/IEC 15459-2 Issuing Agency, Dun & Bradstreet. D&B will assign a D&B D-U-N-S Number to any business location with unique, separate, and distinct operations. However, generic departments at the same location or un-staffed operatio
38、ns points (e.g., automated teller machines, vending machines, etc.) will not be assigned a D&B D-U-N-S Number. See clause 2, References. 6.3.3 Use The code identifies the manufacturer, supplier, or related service company providing unique identity within the serialization process. The code identifie
39、s unique business entities. 6.4 EDIFICE Company Identification Number (CIN) 6.4.1 Code Structure The EDIFICE Company Identification Number consists of a Manufacturer Identification Segment comprised of the ISO/IEC 15459-2 Issuing Agency Code, “LE” for EDIFICE, followed by a three (3) alphanumeric ch
40、aracter Company Identification Number, ending with Serial Number Segment consisting of one (1) to twenty (20) alphanumeric characters. The following table provides an example: ELEMENTS/POSITIONS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Issuing Agency Code L E Company Identif
41、ication No. Alpha-numeric Serial Number Segment Alpha-numeric 6.4.2 Assignment The code is assigned by the Maintenance Agent (EDIFICE). 6.4.3 Use The code identifies the manufacturer, supplier, or related service company providing unique identity within the serialization process. The code identifies
42、 unique business entities. 7 Serial Number Segment 7.1 Code Structure The code structure of the Serial Number Segment is of variable length. The maximum length of the Serial Number Segment is dependent on the length of the Manufacturer Identification Segment, where the combined segments shall not ex
43、ceed a total of twenty-five (25) characters. The characters for the serial number segment shall consist only of combinations of letters, digits, slashes, and/or dashes. ATIS-0300091.2018 6 7.2 Assignment The Serial Number Segment shall be assigned by the manufacturer, supplier, or related services c
44、ompany. Each Serial Number Segment must be a unique number within the Manufacturer Identification Segment. 7.3 Use The Serial Number Segment provides unique identification of each item from all other like or unlike items provided by a manufacturer, supplier, or related service company for the life of the item. Use of the Serial Number Segment as a stand-alone element is not sufficient for a user to uniquely identify an item. The Serial Number Segment is assigned for the life of an item.
