1、 ATIS-0500005 Standard Wireless Text Message Case Matrix 2ATIS is a technical planning and standards development organization that is committed to rapidly developing and promoting technical and operations standards for the communications and related information technologies industry worldwide using
2、a pragmatic, flexible and open approach. Over 1,100 participants from more than 350 communications companies are active in ATIS 22 industry committees, and its Incubator Solutions Program. www.atis.org REVISION HISTORY ATIS-0500005 Version Date Changes 1.0 09-9-2005 Initial Release Standard Wireless
3、 Text Message Case Matrix is an ATIS standard developed by the following committee of the ATIS User Interface functional group: Emergency Services Interconnection Forum (ESIF), Subcommittee F Published by Alliance for Telecommunications Industry Solutions (ATIS) 1200 G Street, NW, Suite 500 Washingt
4、on, DC 20005 Copyright 2005 by Alliance for Telecommunications Industry Solutions All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. For information contact ATIS at (20
5、2) 628-6380. ATIS is online at: http:/www.atis.org. Printed in the United States of America. 3Disclaimer and Limitation of Liability The information provided in this document is directed solely to professionals who have the appropriate degree of experience to understand and interpret its contents in
6、 accordance with generally accepted engineering or other professional standards and applicable regulations. No recommendation as to products or vendors is made or should be implied. NO REPRESENTATION OR WARRANTY IS MADE THAT THE INFORMATION IS TECHNICALLY ACCURATE OR SUFFICIENT OR CONFORMS TO ANY ST
7、ATUTE, GOVERNMENTAL RULE OR REGULATION, AND FURTHER NO REPRESENTATION OR WARRANTY IS MADE OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. ATIS SHALL NOT BE LIABLE, BEYOND THE AMOUNT OF ANY SUM RECEIVED IN PAYMENT BY ATIS FOR THIS DOCU
8、MENT, WITH RESPECT TO ANY CLAIM, AND IN NO EVENT SHALL ATIS BE LIABLE FOR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. ATIS EXPRESSLY ADVISES THAT ANY AND ALL USE OF OR RELIANCE UPON THE INFORMATION PROVIDED IN THIS DOCUMENT IS AT THE RISK OF THE USER. 4Standard Wireless Text Message C
9、ase Matrix Wireline Compatibility This is the term J-STD-036 uses to describe wireless implementation that delivers the pANI only during call setup. NCAS This is the term J-STD-036 uses to describe wireless implementation that delivers both the CBN and pANI during call setup. Case # Scenario Cause A
10、LI Text Message Comments 1 ESME cannot communicate with MPC MPC links down *WIRELESS MPC LINK DOWN* If this message is received for multiple calls follow local procedures for reporting problem. It is possible that this message could appear for one wireless service provider and not others. 2 ESME did
11、 not receive response from MPC Timeout *WIRELESS MPC TIMEOUT- REBID* The call taker should attempt a re-bid after 20 seconds. It is possible for wireline compatibility deployments that the CBN may not be displayed when a timeout occurs for an initial bid. 2A ESME did not receive response from MPC on
12、 re-bid. Initial bid data exists Timeout *WIRELESS MPC TIMEOUT - REBID* The call taker should attempt a re-bid after 20 seconds. 3 MPC returned error response to ESME for NCAS deployment MPC returned error, reject or Inactive *WIRELESS PH 1- REBID* For NCAS (20 digit )CBN is known. The ALI returned
13、a response based on cell sector. Call taker should re-bid if Phase 2 location is needed. 3A MPC returned error response to ESME for Wireline Compatibility deployment MPC returned error, reject or Inactive *WIRELESS CBN NOT AVAIL - REBID* The call taker should re-bid the ALI. If problem continues fol
14、low local procedures for reporting problem. 4 MPC returned Phase 2 data Phase 2 position source, or other Phase 2 trigger. Lat/Lon populated *WIRELESS PH 2* The call taker should NOT re-bid unless uncertainty value is large or updated location is required. 5Case # Scenario Cause ALI Text Message Com
15、ments 5 MPC returned Phase 1 data Phase 1 position source, or other Phase 1 trigger. Phase 2 deployment *WIRELESS PH 1-REBID* The call taker should attempt a re-bid after 20 seconds. 6 MPC returned Phase 1 data Phase 1 deployment only *WIRELESS PH 1 ONLY* The call taker should NOT re-bid. This is a
16、Phase 1 only deployment. 7 MPC did not return position source or other trigger to determine if Phase 1 or Phase 2 Possible GSM deployment without use of trigger to determine phase *WIRELESS PH UNKNOWN* The call taker should use the uncertainty value to determine if Phase1 or Phase 2 response. 8 ESME
17、 did not receive response from MPC for NCAS deployment ESRD record does not exist *WIRELESS MPC TIMEOUT-REBID* NO CELL DATA AVAIL in customer name field. Call Taker should re-bid after 20 seconds. Refer lack of cell data to System Service Provider. 8A ESME did not receive response from MPC for wirel
18、ine compatibility deployment. ESRK shell record does not exist *WIRELESS MPC TIMEOUT-REBID* NO CELL DATA AVAIL in customer name field. Call Taker should re-bid after 20 seconds. Refer lack of cell data to System Service Provider. 9 NCAS MPC response no location data Geo position not provided *WIRELE
19、SS PH 1- REBID* The call taker should attempt a re-bid after 20 seconds if Phase 2 data is needed. 9A Wireline Compatibility MPC response with CBN no location information Geo position not provided *WIRELESS PH 1- REBID* The call taker should attempt a re-bid after 20 seconds if Phase 2 data is needed.
