1、AWWA Standard SM Sodium Aluminate Effective date: Nov. 1, 2016. First edition approved by AWWA Board of Directors May 15, 1960. This edition approved June 19, 2016 Approved by American National Standards Institute May 12, 2016. ANSI/AWWA B405-16 (Revision of ANSI/AWWA B405-06) Copyright 2016 America
2、n Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information normally contained i
3、n specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitute endorsement of any product or produ
4、ct type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards are intended to represent a consen
5、sus of the water industry that the product described will provide satisfactory ser- vice. When AWWA revises or withdraws this standard, an official notice of action will be placed on the first page of the Official Notice section of Journal American Water Works Association. The action becomes effecti
6、ve on the first day of the month following the month of Journal American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American National Stand
7、ard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, from manufacturing, marketing, purchasing, or using products, pro
8、cesses, or procedures not conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encour - aged to state on their own responsibility in
9、advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates completion of the ANSI app
10、roval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American National Standards may receive current inf
11、ormation on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900; or emailing infoansi.org. ISBN-13, print: 978-1-62576-186-6 eISBN-13, electronic: 978-1-61300-395-4 DOI: http:/dx.doi.org/10.12999/AWWA.B405
12、.16 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for review purposes, without the wri
13、tten permission of the publisher. Copyright 2016 by American Water Works Association Printed in USA hours of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, either electronic or photocopied, is ill
14、egal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of Copyright 2016 American Water Works Association. All Rights Reserved. iii Committee Personnel The AWWA Standards Committee on Iron Salts, Aluminum Salts, and Related Coagulant Aids, which
15、reviewed and approved this standard, had the following personnel at the time of approval: Glenn R. Evers, Chair Jan J. Pavlicek, Vice-Chair General Interest Members M.B. Alvarez, CH2M, Coral Gables, Fla. (AWWA) K-K Au, FMC Global Peroxygens, Naperville, Ill. (AWWA) J.D. Edwards, Westerville, Ohio (AWWA) G.R. Evers, IS2 LLC, Hockessin, Del. (AWWA) J.J. Gemin, AECOM, Kitchener, Ont., Canada (AWWA) P.H. Hargette, Black write to the department at 6666 West Quincy Avenue, Denver, CO 80235-3098; or email at standardsawwa.org. Copyright 2016 American Water Works Association. All Rights Reserved.
