BS DD CEN TS 14235-2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overa.pdf

上传人:confusegate185 文档编号:548055 上传时间:2018-12-09 格式:PDF 页数:60 大小:597.84KB
下载 相关 举报
BS DD CEN TS 14235-2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overa.pdf_第1页
第1页 / 共60页
BS DD CEN TS 14235-2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overa.pdf_第2页
第2页 / 共60页
BS DD CEN TS 14235-2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overa.pdf_第3页
第3页 / 共60页
BS DD CEN TS 14235-2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overa.pdf_第4页
第4页 / 共60页
BS DD CEN TS 14235-2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overa.pdf_第5页
第5页 / 共60页
亲,该文档总共60页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、DRAFT FOR DEVELOPMENT DD CEN/TS 14235:2002 Materials and articles in contact with foodstuffs Polymeric coatings on metal substrates Guide to the selection of conditions and test methods for overall migration ICS 67.250 DD CEN/TS 14235:2002 This Draft for Development was published under the authority

2、 of the Standards Policy and Strategy Committee on 30 January 2003 BSI 30 January 2003 ISBN 0 580 41153 2 National foreword This Draft for Development is the English language version of CEN/TS 14235:2002. This publication is not to be regarded as a British Standard. It is being issued in the Draft f

3、or Development series of publications and is of a provisional nature because of the need to develop a method of test dealing with the coatings of materials and articles in contact with food, in order to satisfy the proposed European legislation. It should be applied on this provisional basis, so tha

4、t information and experience of its practical application may be obtained. Comments arising from the use of this Draft for Development are requested so that UK experience can be reported to the European organization responsible for its conversion to a European standard. A review of this publication

5、will be initiated 2 years after its publication by the European organization so that a decision can be taken on its status at the end of its 3-year life. Notification of the start of the review period will be made in an announcement in the appropriate issue of Update Standards. According to the repl

6、ies received by the end of the review period, the responsible BSI Committee will decide whether to support the conversion into a European standard, to extend the life of the Technical Specification or to withdraw it. Comments should be sent in writing to the Secretary of BSI Subcommittee CW/47/1, Mi

7、gration from plastics, 389 Chiswick High Road, London W4 4AL, giving the document reference and clause number and proposing, where possible, an appropriate revision of the text. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The Br

8、itish Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards O

9、nline. Summary of pages This document comprises a front cover, an inside front cover, the CEN/TS title page, pages 2 to 56, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. N

10、o. Date CommentsTECHNICALSPECIFICATION SPCIFICATIONTECHNIQUE TECHNISCHESPEZIFIKATION CEN/TS14235 October2002 ICS67.250 Englishversion MaterialsandarticlesincontactwithfoodstuffsPolymeric coatingsonmetalsubstratesGuidetotheselectionof conditionsandtestmethodsforoverallmigration WerkstoffeundGegenstnd

11、einKontaktmitLebensmitteln PolymerebeschichtungenaufSubstratenausMetall LeitfadenzurAuswahlderBedingungenundPrfverfahren zurBestimmungderGesamtmigration ThisTechnicalSpecification(CEN/TS)wasapprovedbyCENon28July2002forprovisionalapplication. TheperiodofvalidityofthisCEN/TSislimitedinitiallytothreeye

12、ars.AftertwoyearsthemembersofCENwillberequested tosubmittheir comments,particularlyonthequestionwhethertheCEN/TScanbeconvertedintoaEuropeanStandard. CENmembersarerequiredtoannouncetheexistenceofthisCEN/TSinthesamewayasforanENandtomaketheCEN/TSavailable .It ispermissibletokeepconflictingnationalstand

13、ardsinforce(inparalleltotheCEN/TS)untilthefinaldecisionaboutthep ossible conversionoftheCEN/TSintoanENisreached. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Swed

14、en,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.CEN/TS14235:2002ECEN/TS14235

15、:2002(E) 2 Contents page Foreword4 Introduction .5 1 Scope 6 2 Normativereferences 6 3 Termsanddefinitions. .6 3.1 polymericcoating . .6 3.2 finalarticle . .7 3.3 sample.7 3.4 testspecimen . 7 3.5 testpiece .7 3.6 conventionaloven . 7 3.7 foodsimulant. .7 3.8 migrationtest .7 3.9 substitutetest. 7 3

16、.10 testmedia . 7 3.11 alternativetest. .7 3.12 extractiontests. 7 3.13 overallmigration;globalmigration 7 3.14 reductionfactor. .8 3.15 pouch 8 3.16 reversepouch .8 3.17 inertsubstrate 8 3.18 pressureretortorautoclave . 8 3.19cell 8 3.20repeatabilityvaluer. 8 3.21reproducibilityvalueR . 8 3.22repea

17、tabilityconditions 8 3.23reproducibilityconditions 8 4 Typesoftest. 9 4.1 Migrationtests. .9 4.2 Substitutetests 9 4.3 Alternativetests . 9 4.4 Criteriafortheuseofsubstitutetests .9 5 Foodsimulants,testmediaandreagents 9 5.1 Aqueousfoodsimulants .9 5.2 Fattyfoodsimulants 10 5.3 Testmedia 11 5.4 Reag

18、ents.11 6 Selectionoffoodsimulants. .11 6.1 General11 6.2 Simulatingcontactwithallfoodtypes 11 6.3 Simulatingcontactwithspecificfoodtypes. 11 6.4 Simulatingcontactwithdryfoods . 18 6.5 Testingforfattycontact . .18 7 Migrationtests,substitutetestsandalternativetestconditions .19 7.1 Testconditionsfor

19、migrationtests. .19 7.2 Testconditionsforsubstitutetests .22 7.3 Testconditionsforalternativetests . .24 8 Apparatus .24 8.1 Specimensupports. .24 8.2 Tubes,glassrodsandglassbeads . 24CEN/TS14235:2002(E) 3 8.3 Cells.24 8.4 Thermostaticallycontrolledovensorincubators . .24 9 Samplesandsamplegeometry.

20、 .25 9.1 Samples 25 9.2 Surfacetovolumeratio. 25 9.3 Singlesurfaceversusdoublesurfacetesting(bytotalimmersion) 25 9.4 Singlesurfacetestingusingacell. 26 9.5 Singlesurfacetestingbypouch .26 9.6 Singlesurfacetestingusingareversepouch 27 9.7 Singlesurfacetestingbyfilling. .27 9.8 Articlesintendedforrep

21、eateduse .27 9.9 Caps,closuresandothersealingdevices 28 9.10 Foodandbeveragecans. 28 9.11 Nonstickcoatings. 29 9.12 Flexiblefilms . .29 9.13 Largecontainers. .29 9.14 Inertsubstrates. .29 9.15 Tubing,taps,valvesandfilters . .29 9.16 Articlesofirregularshape 29 10 Overallmigrationtestmethodswithfatty

22、foodsimulants . .30 10.1 Extractionsolvents 30 10.2 Incompleteextractionoffat. .30 10.3 Substanceswhichinterferewithgaschromatography. 30 10.4 Lossofvolatilesubstances 30 10.5 Gaschromatographiccolumns 31 10.6 ChangesintheC18/C16ratio . 31 10.7 Initialmassofthetestspecimen .32 10.8 Finalmassofthetes

23、tspecimen 33 10.9 Selectionoftheappropriateconditioningprocedure 33 10.10 Lossofsimulantduetopermeation 34 11 Precision.34 12 Testreports . .34 12.1 Surfacetovolumeratiosinactualuse. .34 12.2 Reductionfactors 35 12.3 Validityofresults .36 12.4 Testreport 36 12.5 Statementsofcompliance . .36 13 Testm

24、ethodforoverallmigrationintoaqueoussimulantsbyarticlefillingfrompolymeric coatingsonfoodandbeveragecansandnonstickcoatings37 13.1 Scope 37 13.2 Principle37 13.3 Reagents.37 13.4 Apparatus .37 13.5 Preparationoftestspecimens .38 13.6 Procedure .39 13.7 Expressionofresults 40 13.8 Testreport 43 AnnexA

25、 (normative) Characteristicsoffattyfoodsimulantsandtestmedia44 AnnexB (normative) Limitdeviationsoncontacttimesandcontacttemperaturesapplicabletoall clausesofthisTechnicalSpecification .46 AnnexC (normative) Supportsandcells. .48 Bibliography 56CEN/TS14235:2002(E) 4 Foreword Thisdocument(CEN/TS14235

26、:2002)hasbeenpreparedbyCEN/TC194“Utensilsincontactwithfood“,the secretariatofwhichisheldbyBSI. ThisdocumenthasbeenpreparedunderamandategiventoCENbytheEuropeanCommissionandtheEuropean FreeTradeAssociation. InthisTechnicalSpecificationtheannexesA,BandCarenormative. ThisTechnicalSpecificationincludesaB

27、ibliography. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoannouncethisTechnicalSpecification:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal, Spa

28、in,Sweden,SwitzerlandandtheUnitedKingdom.CEN/TS14235:2002(E) 5 Introduction Nosingletestmethodhasbeendevisedwhichcanbeusedtodetermineoverallmigration,atalltemperatures,in allfoodsimulants.Indeed,owingtothepracticaldifficultiesinherentintestingwithinvolatileextractantssuchas fatsandthemultitudeofappl

29、icationsinwhichpolymericcoatingsonmetalsubstratescomeintocontactwithfood, therearemanymethodsandpermittedvariationstomethodsinthisTechnicalSpecification. ThisTechnicalSpecificationisintendedtogiveadviceontheselectionofthemostappropriatetypeoftest,test conditionsandtestmethodforagivenapplicationofapo

30、lymericcoatingonametalsubstrateandisintendedtobe readinitsentiretybeforetestingprotocolsarefinalized.Atestmethodforoverallmigrationintoaqueoussimulants byarticlefillingfrompolymericcoatingsonfoodandbeveragecansandnonstickcoatingsisgiveninclause12. FormanypolymericcoatedarticlesmethodsinEN11862toEN11

31、869aresuitable,accordingtotheformin whichthearticleistested. Thegeneralcriteriafortheoperationandassessmentoftestinglaboratoriesaswellasthegeneralcriteriafor laboratoryaccreditationbodiesaresetoutinEN45001,EN45002andEN45003.Itisrecommendedthat laboratoriesusingthisTechnicalSpecificationvalidatetheir

32、proceduresbytestingcertifiedreferencesamplesand bytakingpartinaproficiencyscheme.SuitableproficiencyschemesareoperatedinGermanyandintheUnited Kingdom,forexampletheGermanAssessmentSchemeforFoodTesting(GAFT)andtheFoodAnalysis PerformanceAssessmentScheme(FAPAS)conductedbytheCentralScienceLaboratoryofth

33、eMinistryof Agriculture,FisheriesandFood.CEN/TS14235:2002(E) 6 1Scope ThisTechnicalSpecificationgivesguidelinesfortheselectionoftheappropriateconditionsandtestmethodsfor thedeterminationofoverallmigrationintofoodsimulantsandtestmediafrompolymericcoatingsonmetal substrateswhichareintendedtocomeintoco

34、ntactwithfoodstuffsandatestmethodforoverallmigrationinto aqueoussimulantsbyarticlefillingfrompolymericcoatingsonfoodandbeveragecansandnonstickcoatings. NOTE PolymericcoatingsonmetalsubstratesarenotyetincludedinthescopeofanyEuropeanUnionDirective.This TechnicalSpecificationhasbeenpreparedtoassistinth

35、edevelopmentofsuchaDirective. 2 Normativereferences ThisTechnicalSpecificationincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisio

36、nsofanyofthesepublicationsapplytothisTechnical Specificationonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionof thepublicationreferredtoapplies(includingamendments). EN11862, MaterialsandarticlesincontactwithfoodstuffsPlasticsPart2:Testmethodsforoverallmigration into

37、oliveoilbytotalimmersion. EN11863, MaterialsandarticlesincontactwithfoodstuffsPlasticsPart3:Testmethodsforoverallmigration intoaqueousfoodsimulantsbytotalimmersion. EN11864, MaterialsandarticlesincontactwithfoodstuffsPlasticsPart4:Testmethodsforoverallmigration intooliveoilbycell. EN11865, Materials

38、andarticlesincontactwithfoodstuffsPlasticsPart5:Testmethodsforoverallmigration intoaqueousfoodsimulantsbycell. EN11866, MaterialsandarticlesincontactwithfoodstuffsPlasticsPart6:Testmethodsforoverallmigration intooliveoilusingapouch EN11867, MaterialsandarticlesincontactwithfoodstuffsPlasticsPart7:Te

39、stmethodsforoverallmigration intoaqueousfoodsimulantsusingapouch. EN11868; MaterialsandarticlesincontactwithfoodstuffsPlasticsPart8:Testmethodsforoverallmigration intooliveoilbyarticlefilling. EN118612, MaterialsandarticlesincontactwithfoodstuffsPlasticsPart12:Testmethodsforoverallmigration atlowtem

40、peratures. EN118613, MaterialsandarticlesincontactwithfoodstuffsPlasticsPart13:Testmethodsforoverallmigration athightemperatures. ISO648 LaboratoryglasswareOnemarkpipettes 3 Termsanddefinitions ForthepurposesofthisTechnicalSpecificationthefollowingtermsanddefinitionsapply. 3.1 polymericcoating organ

41、icmaterialappliedintheformofacontinuousfilmonasubstrateinsuchawayastoformaprotectivelayer and/orafunctionalbarrierbetweenfoodandsubstrate.Theymaybeappliedtothesubstrateintheformof solution,dispersions,powders,orsolventfreepreparations. NOTE Thismaybedifferenttothedefinitionwhichisexpectedtobeinclude

42、dinCommissionDirective90/128/EECwhen itsscopeisextendedtoincludepolymericcoatingsCEN/TS14235:2002(E) 7 3.2 finalarticle articleinitsreadyforusestateorassold 3.3 sample materialorarticleunderinvestigation 3.4 testspecimen portionofthesampleonwhichatestisperformed 3.5 testpiece portionofthetestspecime

43、n 3.6 conventionaloven ovenwheretheairwithintheovenisheatedandthisheatisthentransferredtothefoodthroughthefinalarticleas opposedtoamicrowaveovenwherethefooditselfisheateddirectlybymicrowaveirradiation 3.7 foodsimulant mediumintendedtosimulateafoodstuff(seeclauses3and4) 3.8 migrationtest testforthede

44、terminationofoverallmigrationusingfoodsimulantsunderconventionaltestconditions 3.9 substitutetest testcarriedoutwhichusestestmediaunderconventionalsubstitutetestconditionswhentheuseofamigration testisnotfeasible 3.10 testmedia substancesusedin“substitutetests“,isooctane,95%ethanolinaqueoussolutionandmodifiedpolyphenylene oxide 3.11 alternativetest tests,withvolatilemedia,thatmaybeusedinsteadofmigrationtestswithfattyfoodsimulants 3.12 extractiontests testsinwhichmediahavingstro

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1