1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Operating temperatures between 55 C and 260 CPart 005: UV laser printable Product standardThe Europ
2、ean Standard EN 2267-005:2006 has the status of a British StandardICS 49.060Aerospace series Cables, electrical, for general purpose BRITISH STANDARDBS EN 2267-005:2006BS EN 2267-005:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 Octo
3、ber 2006 BSI 2006ISBN 0 580 49471 3Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal
4、obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 2267-005:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/2, Aerospace C
5、ables.A list of organizations represented on ACE/6/-/2 can be obtained on request to its secretary.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 2267-005June 2006ICS 49.060English VersionAerospace series - Cables, electrical, for general purpose -Operating temperatures between - 55 C and 260 C -
6、 Part 005:UV laser printable - Product standardSrie arospatiale - Cbles, lectriques, dusage gnral -Tempratures de fonctionnement comprises entre - 55 Cet 260 C - Partie 005 : Marquables au laser UV - Norme deproduitLuft- und Raumfahrt - Leitungen, elektrisch, fr allgemeineVerwendung - Betriebstemper
7、aturen zwischen - 55 C und260 C - Teil 005: UV Laser bedruckbar - ProduktnormThis European Standard was approved by CEN on 26 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a natio
8、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any o
9、ther language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fr
10、ance,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NO
11、RMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2267-005:2006: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms, definitions and symbols.4 4 Materi
12、als and construction .4 4.1 Materials .4 4.2 Construction.5 4.3 Number of cores 5 4.4 Colour coding of cores .6 5 Required characteristics.6 6 Quality assurance8 7 Designation 8 8 Identification and marking 8 9 Packaging, labelling and delivery lengths 8 10 Technical specification .8 EN 2267-005:200
13、63 Foreword This European Standard (EN 2267-005:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the Nation
14、al Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting nationa
15、l standards shall be withdrawn at the latest by December 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CE
16、NELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma
17、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2267-005:20064 1 Scope This standard specifies the characteristics of UV laser printable electrical cables for use in the on-board electrical systems of aircraft at operatin
18、g temperatures between 55 C and 260 C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838. 2 Normative references The following referenced documents are indispensable for the application of this document. For d
19、ated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard. EN 2084, Aerospace series Cables, electric, s
20、ingle-core, general purpose, with conductors in copper or copper alloy Technical specification. EN 2267-002, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 002: General. EN 3475-100*, Aerospace series Cables, electrical, aircraft use Test
21、methods Part 100: General. EN 3838, Aerospace series Requirements and tests on user-applied markings on aircraft electrical cables.1)EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. 3 Terms, definitions and symbols For the purposes of this do
22、cument, the terms, definitions and symbols given in EN 3475-100 apply. 4 Materials and construction 4.1 Materials Conductor: See EN 2267-002. Insulation: for conductor sizes code 001 to 010: first layer polyimide with total thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m t
23、hick of fluorocarbon; *All parts quoted in this standard. 1) Published as AECMA Prestandard at the date of publication of this standard. EN 2267-005:20065 direction of winding immaterial overlap 51 % min.; second layer polytetrafluoroethylene (PTFE) 0,06 mm thick before use running in opposite direc
24、tion to first layer overlap 65 % min.; or two layers of polytetrafluoroethylene (PTFE) 0,06 mm thick before use running in opposite direction to first layer one layer 51 % min. overlap and one layer in opposite direction 20 % min. overlap; for conductor sizes code 012 to 051: first layer polyimide w
25、ith total thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m thick of fluorocarbon; direction of winding immaterial overlap 51 % min.; second layer polytetrafluoroethylene (PTFE) 0,06 mm thick before use running in opposite direction to first layer overlap 74 % min.; or two l
26、ayers of polytetrafluoroethylene (PTFE) 0,06 mm thick before use running in opposite direction to first layer one layer 51 % min. overlap and one layer in opposite direction 47 % min. overlap. A top coat may be applied. It shall be possible to mark the external surface of the insulation by UV laser
27、printing. 4.2 Construction See EN 2083 and Table 1. Table 1 Nominal section AWG aLinear resistance at 20 C External diameter Mass mm2/km mm kg/km Code for nominal section max. min. max. max. 001 0,15 26 160,0 0,90 1,06 2,8 002 0,25 24 114,0 0,99 1,16 3,6 004 0,4 22 60,0 1,15 1,31 5,0 006 0,6 20 33,2
28、 1,38 1,56 7,9 010 1 18 21,1 1,62 1,82 11,4 012 1,2 16 14,5 1,97 2,18 16,5 020 2 14 10,9 2,22 2,43 21,5 030 3 12 6,8 2,68 2,93 33,5 050 5 10 4,2 3,27 3,46 52,4 051 b5 10 4,1 3,30 3,58 53,9 aAWG = Closest American Wire Gage. bFlexible construction which may be used as an alternative. 4.3 Number of co
29、res See EN 2267-002. EN 2267-005:20066 4.4 Colour coding of cores See EN 2267-002. 5 Required characteristics According to EN 2084 and EN 3475-100. See Table 2. Table 2 EN 3475- Test Details 201 Visual examination Applicable 202 Mass Applicable; see Table 1. 203 Dimensions Applicable; see Table 1. 3
30、01 Ohmic resistance per unit length Applicable; see Table 1. 302 Voltage proof test Applicable 303 Insulation resistance Applicable 304 Surface resistance Applicable 305 Overload resistance Applicable T1= (310 5) C; T2= (450 5) C 401 Accelerated ageing Applicable Temperature (310 5) C 402 Shrinkage
31、and delamination Applicable Temperature (290 5) C Maximum shrinkage at each end of cable: 0,15 mm2to 0,6 mm2: 0,8 mm 1 mm2to 1,2 mm2: 1 mm 2 mm2to 5 mm2: 1,2 mm 403 Delamination and blocking Applicable Temperature (310 5) C 404 Thermal shock Applicable Temperature (290 5) C Maximum shrinkage at each
32、 end of cable: 0,15 mm2to 0,6 mm2: 0,8 mm 1 mm2to 1,2 mm2: 1 mm 2 mm2to 5 mm2: 1,2 mm 405 Bending at ambient temperature Applicable 406 Cold bend test Applicable continued EN 2267-005:20067 Table 2 (continued) EN 3475- Test Details 407 Flammability Applicable Extinguishing time: 3 s max. 408 Fire re
33、sistance Not applicable 409 Air-excluded ageing Not applicable 410 Thermal endurance Applicable 40 000 h (temperature 260 C) 411 Resistance to fluids Applicable 501 Dynamic cut-through Applicable Temperatures (20 3) C and (260 5) C Cut-through force Nominal section mm220 C N 260 C N 0,15 0,25 0,40 0
34、,60 1,00 1,20 2,00 3,00 5,00 70 85 110 140 140 150 150 165 180 15 30 45 55 70 85 95 105 120 502 Notch propagation Applicable Notch depth : 40 m 503 Scrape abrasion Applicable Test force on needle for cables: 0,15 mm2= 5 N 0,25 mm2to 0,6 mm2= 8 N 1 mm2to 1,2 mm2= 10 N 2 mm2to 5 mm2= 12 N 504 Torsion
35、Applicable T3= (260 5) C; T4= (310 5) C 505 Tensile test on conductors and strands Applicable 506 Plating continuity Applicable 507 Adherence of plating Applicable 508 Plating thickness Applicable 509 Solderability Not applicable 601 Smoke density Applicable 602 Toxicity Applicable continued EN 2267
36、-005:20068 Table 2 (concluded) EN 3475- Test Details 603 Resistance to wet arc tracking Not applicable 604 Resistance to dry arc propagation Not applicable 701 Strippability and adherence of insulation to the conductor Applicable 702 Screen pushback capability Not applicable 703 Permanence of manufa
37、cturers marking Applicable 6 Quality assurance See EN 9133. 7 Designation EXAMPLE Description block CABLE, ELECTRICAL Identity block EN2267-005A010P Number of this standard Code letter for number of cores (see EN 2267-002, Table 1) Code for nominal section (see Table 1) Code letter for colour coding
38、 of cores (see EN 2267-002) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 8 Identification and marking See EN 2267-002. 9 Packaging, labelling and delivery lengths See EN 2084. 10 Technical specification See EN 2084. EN 2267-005:2006blankBS E
39、N BSI389 Chiswick High RoadLondonW4 4AL2267-005:2006BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish S
40、tandards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while us
41、ing this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers a
42、utomatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI websit
43、e at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and inter
44、national standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.
45、Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Inform
46、ation regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of
47、the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from
48、 BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
