1、BRITISH STANDARD AEROSPACE SERIESBS EN 2591-220:2005Elements of electrical and optical connection Test methods Part 220: Contact/conductor joint ageing by current and temperature cyclingThe European Standard EN 2591-220:2005 has the status of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42
2、g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon May 08 02:46:47 BST 2006, Uncontrolled Copy, (c) BSIBS EN 2591-220:2005This British Standard was
3、 published under the authority of the Standards Policy and Strategy Committee on 10 February 2006 BSI 10 February 2006ISBN 0 580 47800 9National forewordThis British Standard is the official English language version of EN 2591-220:2005.The UK participation in its preparation was entrusted by Technic
4、al Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards wh
5、ich implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publica
6、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international
7、/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pag
8、es 2 to 5 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Mon May 08 02:46:47 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUR
9、OPISCHE NORMEN 2591-220October 2005ICS 49.060English VersionAerospace series - Elements of electrical and optical connection- Test methods - Part 220: Contact/conductor joint ageing bycurrent and temperature cyclingSrie arospatiale - Organes de connexion lectrique etoptique - Mthodes dessais - Parti
10、e 220 : Vieillissementdes contacts et conducteurs par cyclage en temprature eten courantLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prverfahren - Teil 220: Alterungvon Kontakten und Leiteren durch zyklische Temperatur-und StrombelastungThis European Standard was approved by C
11、EN on 19 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandard
12、s may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the C
13、entral Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po
14、land, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means r
15、eservedworldwide for CEN national Members.Ref. No. EN 2591-220:2005: ELicensed Copy: Wang Bin, na, Mon May 08 02:46:47 BST 2006, Uncontrolled Copy, (c) BSI2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Preparation of specimens 4 4 Test method and requirements4 5 Load and temperatu
16、re cycling test5 6 Measurements and requirements 5 7 Details to be specified 5 EN 2591-220:2005Licensed Copy: Wang Bin, na, Mon May 08 02:46:47 BST 2006, Uncontrolled Copy, (c) BSI3 Foreword This European Standard (EN 2591-220:2005) has been prepared by the European Association of Aerospace Manufact
17、urers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This Europe
18、an Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April 2006. Attention is drawn to the possibility that some of the elements
19、of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europea
20、n Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2591-220:
21、2005Licensed Copy: Wang Bin, na, Mon May 08 02:46:47 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies a method to demonstrate the long term electrical stability of the conductor to contact joint in the EN 3155 series of product standards. The thermal cycling test is carried out
22、using a combination of conductor current and “ambient” heat to achieve the appropriate maximum rated operating temperature. It shall be used together with EN 2591-100. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated referenc
23、es, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Elements of electrical and optical connection Test methods Part 100: General. EN 2591-202, Aerospace series Elements of electric
24、al and optical connection Test methods Part 202: Contact resistance at rated current. EN 2591-417, Aerospace series Elements of electrical and optical connection Test methods Part 417: Tensile strength (crimped connection). EN 3155 (all parts), Aerospace series Electrical contacts used in elements o
25、f connection. 3 Preparation of specimens A test specimen shall consist of a wired male contact mated with the associated female contact of the same contact and barrel or bucket size (see Figure 1). The cable shall be in accordance with EN 3155-001 and the gauge shall be as specified in the contact p
26、roduct standard. The temperature rating shall be the same as, or exceeding, the maximum stated in the contact product standard. To assist in the voltage drop measurements during testing, test point connections shall be made to the body of the contact, in the vicinity of the joint, and to the conduct
27、or as close as possible to, but not more than 1 mm from, the end of the barrel or bucket. For the test, a number of identical specimens may be linked together in series. See Clause 4. Figure 1 Test specimen 4 Test method and requirements A total of 10 specimens shall be prepared for each barrel or b
28、ucket size, 50 % using maximum size cable, the balance using a minimum size cable. The sequence of testing shall be as given in Table 1. EN 2591-220:2005Licensed Copy: Wang Bin, na, Mon May 08 02:46:47 BST 2006, Uncontrolled Copy, (c) BSI5 Table 1 Test sequence Test Reference Method Additional infor
29、mation Contact resistance at rated current EN 2591-202 As per EN 3155-001 Contacts are to be in free air and not fitted in a connector. Load and temperature cycling See Clause 5 Contacts are to be in free air and not fitted in a connector. Contact resistance at rated current EN 2591-202 As per EN 31
30、55-001 See Clause 6. Contacts are to be in free air and not fitted in a connector. Tensile strength (crimped connection) EN 2591-417 As per EN 3155-001 5 Load and temperature cycling test 5.1 The specimens of the same cable size shall be connected in series and a thermocouple attached to a barrel or
31、 bucket to monitor the temperature of the contacts in the vicinity of the joints. The specimens shall be placed in an enclosure and the relevant conductor current, as defined in the contact product standard, shall be applied. The temperature within the enclosure shall be raised so that the maximum c
32、ontact temperature is achieved by the combined heating effect of current and the prevailing “ambient” enclosure temperature. 5.2 The temperature shall be held to within a tolerance 5 C for a maximum of 1 min. This is defined as the “heat-on“ period. At the end of the “heat-on“ period, the heat and t
33、est current shall be removed and all specimens allowed to cool to (25 5) C. This is the “heat-off“ period. Fan assisted cooling is permissible. A “heat-on“ and “heat-off“ period constitutes one cycle. 5.3 1 000 cycles shall be applied for specimens rated for use below 150 C and 1 500 cycles for spec
34、imens rated for use at 150 C and above. 6 Measurements and requirements 6.1 The voltage drop across each individual joint shall be measured using the attached test points. An initial measurement shall be made before the commencement of cycling and then after every 100 cycles at a consistent temperat
35、ure of (25 5) C on completion of a “heat-off“ period. 6.2 During the final 500 cycles of the test, the voltage drop across each joint shall not vary by more than 20 % from the first value obtained during this period. 6.3 The final value of voltage drop across each joint shall not exceed 150 % of the
36、 initial voltage drop. 7 Details to be specified The following details shall be specified: 1. Temperature rating of the cable; 2. Conductor gauge size and stranding; 3. Conductor material and plating; 4. Joining materials or system to be used; 5. Crimp tools and settings, (if applicable). EN 2591-22
37、0:2005Licensed Copy: Wang Bin, na, Mon May 08 02:46:47 BST 2006, Uncontrolled Copy, (c) BSIBS EN 2591-220:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards i
38、n Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our pr
39、oducts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400
40、.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001
41、. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.I
42、nformation on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Conta
43、ct the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership A
44、dministration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright sub
45、sists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by a
46、ny means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any oth
47、er purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.Licensed Copy: Wang Bin, na, Mon May 08 02:46:47 BST 2006, Uncontrolled Copy, (c) BSI
