1、BRITISH STANDARD AEROSPACE SERIES BS EN 2591-310:1998 Elements of electrical and optical connection Test methods Part 310: Cold The European Standard EN2591-310:1998 has the status of a British Standard ICS 49.060BS EN2591-310:1998 This British Standard, having been prepared under the direction of t
2、he Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 August 1998 BSI 05-1999 ISBN 0 580 30303 9 National foreword This British Standard is the English language version of EN2591-310:1998. The UK participation in its preparation was entrust
3、ed by Technical Committee ACE/6, Aerospace avionic, electrical and fibre optic technology, to Subcommittee ACE/6/3, Aerospace Connectors, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpreta
4、tion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which
5、 implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not
6、 purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside fr
7、ont cover, pages i and ii, the EN title page, pages 2 and 3 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date Comme
8、ntsBS EN2591-310:1998 BSI 05-1999 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 2591-310 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2591-310 June 1998 ICS Descriptors: Aircraft industry, aircraft equipment, connecting equipment, test English version Ae
9、rospace series Elements of electrical and optical connection Test methods Part310: Cold Srie arospatiale Organes de connexion lectrique et optique Mthodes dessais Partie 310: Froid Luft- und Raumfahrt Elektrische und optische Verbindungselemente Prfverfahren Teil310: Klte This European Standard was
10、approved by CEN on22 June1997. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
11、 standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifi
12、ed to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and
13、United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN
14、2591-310:1998 EEN2591-310:1998 BSI 05-1999 2 Foreword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). After inquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the Nation
15、al Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December1998, and conflicting national
16、 standards shall be withdrawn at the latest by December 1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
17、 Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Preparation of specimens 3 4 Apparatus 3 5 Method 3EN2591-310:1998 BSI 05-1999 3 1 Scope This standard specifies a met
18、hod of assessing the ability of elements of connection to function in cold conditions. It shall be used together with EN2591. This method forms part of test EN2591-302. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These
19、normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated
20、references the latest edition of the publication referred to applies. EN 2591, Aerospace series Elements of electrical and optical connection Test methods General. EN 2591-101, Aerospace series Elements of electrical and optical connection Test methods Part 101: Visual examination. EN 2591-206, Aero
21、space series Elements of electrical and optical connection Test methods Part 206: Measurement of insulation resistance. EN 2591-302, Aerospace series Elements of electrical and optical connection Test methods Part 302: Climatic sequence 1) . 3 Preparation of specimens 3.1 Specimens shall be prepared
22、 according to the technical specification. 3.2 Unless specified in the technical specification, the following details shall be stated: specimens mated or unmated and fitted with protective cover (if applicable); mounting method, type of cable and definition of specimen wiring; type of preconditionin
23、g (if applicable); initial measurements (if applicable); severity (see5.3); final measurements and requirements; measurement method according to EN2591-206 and insulation resistance value. 4 Apparatus The test chamber shall be designed so that its temperature is controlled by sensing devices located
24、 at those locations where the specimens are installed. 5 Method 5.1 Preconditioning Preconditioning shall take at least 1h unless otherwise specified. If required, the specimens shall be mated and unmated the number of times specified before testing. 5.2 Initial measurements (if applicable) They sha
25、ll be carried out as specified. 5.3 Severity The severity defined by the temperature and exposure time shall be selected from the list below. 5.3.1 Temperature ( 65 2) C ( 55 2) C ( 40 2) C 5.3.2 Exposure time 16h 5.4 Procedure When the test chamber is at the temperature corresponding to the specifi
26、ed severity, the specimens shall be introduced and connected to the measuring instruments. Exposure time shall be calculated from the moment the chamber has reached thermal stability. 5.5 Final measurements and requirements The specimens shall be subjected to a visual examination (EN2591-101). They
27、shall show no sign of deterioration which might affect performance. If applicable, EN2591-206 test shall be carried out 1h after completion of exposure. 1) Published as AECMA Prestandard at the date of publication of this standardBS EN 2591-310:1998 BSI 389 Chiswick High Road London W4 4AL BSIBritis
28、hStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of British
29、Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the tech
30、nical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders fo
31、r all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless o
32、therwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its produc
33、ts and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administratio
34、n. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stor
35、ed in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or gra
36、de designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
