BS EN 2591-428-2002 Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs《电气和光学连接元件 试验方法 压接终端接线片电流通.pdf

上传人:postpastor181 文档编号:550085 上传时间:2018-12-09 格式:PDF 页数:8 大小:150.37KB
下载 相关 举报
BS EN 2591-428-2002 Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs《电气和光学连接元件 试验方法 压接终端接线片电流通.pdf_第1页
第1页 / 共8页
BS EN 2591-428-2002 Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs《电气和光学连接元件 试验方法 压接终端接线片电流通.pdf_第2页
第2页 / 共8页
BS EN 2591-428-2002 Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs《电气和光学连接元件 试验方法 压接终端接线片电流通.pdf_第3页
第3页 / 共8页
BS EN 2591-428-2002 Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs《电气和光学连接元件 试验方法 压接终端接线片电流通.pdf_第4页
第4页 / 共8页
BS EN 2591-428-2002 Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs《电气和光学连接元件 试验方法 压接终端接线片电流通.pdf_第5页
第5页 / 共8页
亲,该文档总共8页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BRITISH STANDARD AEROSPACE SERIES BS EN 2591-428:2002 Elements of electrical and optical connection Test methods Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs The European Standard EN 2591-428:2002 has the status of a British Standard ICS 49.060 NO COPYING WITHOUT

2、 BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 2591-428:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 8 July 2002 BSI 8 July

3、2002 ISBN 0 580 39947 8 National foreword This British Standard is the official English language version of EN 2591-428:2002. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/3, Aerospac

4、e Connectors, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Stan

5、dards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible

6、for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests inf

7、ormed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indic

8、ates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN2591428 June2002 ICS49.060 Englishversion AerospaceseriesElementsofelectricalandopticalconnection TestmethodsPart428:Sinusoidalvibrationswithpassageof cu

9、rrentforcrimpedterminallugs SriearospatialeOrganesdeconnexionlectriqueet optiqueMthodesdessaisPartie428:Vibrations sinusodalesavecpassagedecourantpourcossesserties LuftundRaumfahrtElektrischeundoptische VerbindungselementePrfverfahrenTeil428:Vibration, sinusfrmugbeiStromflufrgecrimpteKabelschuhe Thi

10、sEuropeanStandardwasapprovedbyCENon8February2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeo

11、btainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions

12、. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMI

13、TEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN2591428:2002EEN2591428:2002(E) 2 Foreword Thisdocument(EN2591428:2002)hasbeenpreparedbytheEuropeanAssociationofAerospace Manufacturers(AE

14、CMA). AfterenquiriesandvotescarriedoutinaccordancewiththerulesofthisAssociation,thisStandardhas receivedtheapprovaloftheNationalAssociationsandtheOfficialServicesofthemembercountriesof AECMA,priortoitspresentationtoCEN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublication

15、ofanidentical textorbyendorsement,atthelatestbyDecember2002,andconflictingnationalstandardsshallbe withdrawnatthelatestbyDecember2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRe

16、public,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway, Portugal,Spain,Sweden,SwitzerlandandtheUnitedKingdomEN2591428:2002(E) 3 1 Scope Thisstandardspecifiesamethodfordeterminingtheabilityofcrimpedterminallugstowithstandsinusoidal vibrationswhenacurre

17、ntispassingthroughthem. ItshallbeusedtogetherwithEN2591100. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromotherpublications. Thesenormativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelisted hereafter.Fordatedreferences,subseque

18、ntamendmentstoorrevisionsofanyofthesepublicationsapplyto thisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthe latesteditionofthepublicationreferredtoapplies. EN2591100 AerospaceseriesElementsofelectricalandopticalconnectionTestmethods Part100:General 1) EN2591403

19、 AerospaceseriesElementsofelectricalandopticalconnectionTestmethods Part403:Sinusoidalandrandomvibration 2) TR4257 AerospaceseriesElementsofelectricalandopticalconnectionRelationshipbetween thenumberingsystemsforpartsofEN2591 3) 3 Preparationofspecimens Thespecimensshallbefittedwiththeirnormalaccess

20、ories,wiredupinaccordancewiththetechnical specification. Thefollowingdetailsshallbespecifiedinthetechnicalspecification: numberofspecimens; typeofcable; installationandwiringofspecimens; initialmeasurementsandrequirement. 4 Equipment InaccordancewithEN2591403. 5 Method 5.1 Initialmeasurements Theses

21、hallbecarriedoutinaccordancewiththetechnicalspecification. 5.2 Level Thevibrationtestlevelshallbegivenbycombiningfiveparameters:frequencyrange,vibrationamplitude, durationoftheendurancetest,ageingtemperatureandcurrent. 1) PublishedasAECMAPrestandardatthedateofpublicationofthisstandard 2) SeeTR4257.

22、3) PublishedasAECMATechnicalReportatthedateofpublicationofthisstandardEN2591428:2002(E) 4 5.2.1 Frequencyrange 10Hzto2000Hz. 5.2.2 Vibrationamplitude Belowcertainfrequenciescalledtransitionfrequencies,amplitudesshallbespecifiedbyconstant displacement,whilstabovethesefrequenciesamplitudesshallbespeci

23、fiedbyconstantacceleration.The valuestobeappliedare0,75mm,15 gn,unlessotherwisespecifiedinthetechnicalspecification. 5.2.3 Durationoftest Theentirefrequencyrangefrom10Hzto2000Hzandbackto10Hzshallberunthroughin20min.This cycleshallbecarriedout12timesineachofthreedirectionsatrightanglestoeachother(i.e

24、.36timesin total),sothatthetotaldurationofthetestisapproximately12h. 5.2.4 Ageingcurrent Duringvibrationacurrentenablingtheageingtemperature(maximumtemperaturesustainedbythecable)to bereachedinthecablecoreshallbepassedthroughthesample.Theageingcurrentshallbedeterminedfor eachtypeofcable. 5.3 Assembl

25、y Theassemblyshallbespecifiedinthetechnicalspecification.BS EN 2591-428:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the internat

26、ional level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We w

27、ould be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an i

28、ndividual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996

29、7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standa

30、rds BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information

31、Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel

32、: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists i

33、n all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any mean

34、s electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1