1、BSI Standards PublicationBS EN 3155-079:2014Aerospace series Electricalcontacts used in elements ofconnectionPart 079: Contacts size 22 for EN 2997,electrical, female, type A, crimp, class S Product standardBS EN 3155-079:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implemen
2、tation of EN 3155-079:2014.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to i
3、nclude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 86113 0ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This Briti
4、sh Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2014.Amendments issued since publicationDate Text affectedBS EN 3155-079:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3155-079 November 2014 ICS 49.060 English Version Aerospace ser
5、ies - Electrical contacts used in elements of connection - Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S - Product standard Srie arospatiale - Contacts lectriques utiliss dans les organes de connexion - Partie 079 : Contacts lectriques taille 22 pour EN 2997, fem
6、elles, type A, sertir, classe S -Norme de produit Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 079: Elektrische Buchsenkontakte Gre 22 fr EN 2997, Typ A, crimpbar, Klasse S - Produktnorm This European Standard was approved by CEN on 14 June 2014. CEN membe
7、rs are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicatio
8、n to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Manageme
9、nt Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L
10、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17
11、, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3155-079:2014 EBS EN 3155-079:2014EN 3155-079:2014 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope 4 2 Normative references 4 3 Terms and definitions .
12、4 4 Required characteristics . 5 4.1 Specific characteristics . 5 4.2 Dimensions and mass . 5 4.3 Marking by colour code 6 4.4 Material, surface treatment . 6 4.5 Permissible cables 6 4.6 Tooling 6 4.7 Cable stripping . 7 4.8 Tests 7 4.9 Gauges 9 5 Designation 9 6 Marking . 9 7 Technical specificati
13、on . 9 BS EN 3155-079:2014EN 3155-079:2014 (E) 3 Foreword This document (EN 3155-079:2014) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standa
14、rd has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b
15、y May 2015, and conflicting national standards shall be withdrawn at the latest by May 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent r
16、ights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fran
17、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3155-079:2014EN 3155-079:2014 (E) 4 Introduction The contacts defined in t
18、his standard are specified for EN 2997 high density. 1 Scope This European Standard specifies the required characteristics and tests applicable to female electrical contacts 079, type A, crimp, class S, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-0
19、01. The associated male contacts are defined in EN 3155-078. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the l
20、atest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard EN 2591 1), Aerospace series Elements of electrical and optical connection Test methods EN 2997 (all parts), Aerospace serie
21、s Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification EN 3155
22、-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts EN 3155-078, Aerospace series Electrical contacts used in elements of connection Part 078: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S Product standard ISO
23、8843, Aircraft Crimp-removable contacts for electrical connectors Identification system SAE-AS22520, Crimping tools, wire termination, general specification for 2)SAE-AS81969, Installing and removal tools, connector electrical contact, general specification for 2) 3 Terms and definitions For the pur
24、poses of this standard, the terms and definitions given in EN 3155-001 apply. 1) All parts quoted in Table 6. 2) Published by: SAE National (US) Society of Automotive Engineers http:/www.sae.org/ BS EN 3155-079:2014EN 3155-079:2014 (E) 5 4 Required characteristics 4.1 Specific characteristics Type A
25、 contacts are for general application and class S corresponds to an operating temperature range from 65 C to 200 C. 4.2 Dimensions and mass See Figure 1 and Figure 2. Dimensions and tolerances are given in millimetres and apply after surface treatment. Mass: 0,20 g. Key 1 One side only 2 Electrical
26、engagement point Figure 1 Key 1 One full rad. permissible Figure 2 Detail A BS EN 3155-079:2014EN 3155-079:2014 (E) 6 4.3 Marking by colour code See Table 1. Table 1 null Marking Two bands according to ISO 8843 Size Contact Barrel Band 1 Band 2 Dot 22 22 Green Green 4.4 Material, surface treatment B
27、ody material: copper alloy. Surface treatment: gold on appropriate undercoat, thickness of protection not specified, selective protection permitted. 4.5 Permissible cables See Table 2. Table 2 null Permissible cables Size Size of conductors Rated test current A Contact Barrel ASD codeSection mm2AWG
28、a22 22 004 0,40 22 5 002 0,25 24 3 001 0,15 26 2 aAWG = Closest American Wire Gage. 4.6 Tooling 4.6.1 Crimping tools Conform to SAE-AS22520, see Table 3. The qualification selector numbers used for crimping copper or copper alloy conductors in cables EN 2083 are indicated in Table 3. It is the respo
29、nsibility of the user if the parameters in Table 3 are changed for service use. BS EN 3155-079:2014EN 3155-079:2014 (E) 7 Table 3 null Crimping tools Contact Cable size Tool M22520/2-01 Contact size Barrel size ASD code AWGaPositioner Selector number 22 22 001 26 M22520/2-23 3 002 24 3 004 22 5 aAWG
30、 = Closest American Wire Gage. 4.6.2 Insertion/Extraction tools Conform to SAE-AS81969. See Table 4. Table 4 null Insertion/Extraction tools Size Insertion tools Extraction tools Contact Barrel 22 22 M81969/1-01 or M81969/14-01 M81969/1-01 or M81969/14-01 4.7 Cable stripping See Table 5. Table 5 nul
31、l Cable stripping Size Stripped length of cable mm 0,5 Contact Barrel 22 22 4,5 4.8 Tests Tests according to EN 2591-100, see Table 6. BS EN 3155-079:2014EN 3155-079:2014 (E) 8 Table 6 null Test reference EN 2591- Designation of the test Not applicable Applicable According to EN 3155-001 Remarks 101
32、 Visual examination X 102 Examination of dimensions and mass X 201 Contact resistance - low level X 202 Contact resistance at rated current X 204 Discontinuity of contacts in the microsecond range X 210 Electrical overload X 220 Contact/conductor joint ageing by current and temperature cycling X 301
33、 Endurance at temperature X T = (200 2) C Duration: 1 000 h 305 Rapid change of temperature X TA= (200 2) C TB= ( 65 2) C 307 Salt mist X 315 Fluid resistance X 316 Ozone resistance X 319 Gastightness of solderless wrapped connections X 402 Shock X 403 Sinusoidal and random vibration X Temperature:
34、200 C 406 Mechanical endurance X 415 Test probe damage (female contacts) X 416 Contact bending strength X 417 Tensile strength (crimped connection) X 418 Gauge insertion/extraction forces (female contacts) X 424 Stripping force, solderless wrapped connections X 425 Unwrapping capability, solderless
35、wrapped connections X 501 Soft solderability X 502 Restricted entry X 503 Contact deformation after crimping X 507 Plating porosity X 508 Measurement of thickness of coating on contacts X The measured thickness shall be recorded. 509 Adhesion of coating on contacts X 513 Magnetic permeability X 514
36、Solderability of contacts with self-contained solder and flux X BS EN 3155-079:2014EN 3155-079:2014 (E) 9 4.9 Gauges See EN 3155-001. 5 Designation EXAMPLE Description block CONTACT, ELECTRICAL Identity block EN3155-079F2222 Number of this standard Type of contact: F: Female Contact size (see Table
37、1) Barrel size (see Table 1) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Marking See EN 3155-001. 7 Technical specification See EN 3155-001. This page deliberately left blankThis page deliberately left blankBSI is the national body respon
38、sible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chis
39、wick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and r
40、efined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting o
41、ur website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need inte
42、rnational and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to
43、British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial disc
44、ounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To fin
45、d out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available
46、, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguit
47、y within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the inform
48、ation used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any f
49、orm or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: subscription
