1、BS EN 3469:2009ICS 49.025.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Steel FE-PM1802 (X5CrNiCu15-5) Consumable electrode remelted Solution treated and precipitation treated Forgings a or D null 200 mm Rm null 1 310 MPaThis British Standar
2、dwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 October2009. BSI 2009ISBN 978 0 580 68933 8Amendments/corrigenda issued since publicationDate CommentsBS EN 3469:2009National forewordThis British Standard is the UK implementation of EN 3469:2009.The UK participati
3、on in its preparation was entrusted to TechnicalCommittee ACE/61/-/15, Steels.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct
4、 application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 3469:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3469 September 2009 ICS 49.025.10 English Version Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solut
5、ion treated and precipitation treated - Forgings - a or D 200 mm - Rm 1 310 MPa Srie arospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu llectrode consommable - Mis en solution et vieilli - Pices forges et pices matrices - a ou D 200 mm - Rm 1 310 MPa Luft- und Raumfahrt - Stahl FE-PM1802 (X5CrNi
6、Cu15-5) - Mit selbstverzehrender Elektrode umgeschmolzen - Lsungsgeglht und ausgelagert - Schmiedestcke - a oder D 200 mm - Rm 1 310 MPa This European Standard was approved by CEN on 8 August 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditio
7、ns for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three o
8、fficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Aust
9、ria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMM
10、ITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3469:2009: EBS EN 3469:2009EN 3469:20
11、09 (E) 2 Foreword This document (EN 3469:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National
12、 Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national stand
13、ards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Inte
14、rnal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma
15、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3469:2009EN 3469:2009 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of thi
16、s series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. BS EN 3469:2009EN 3469:2009 (E) 4 1 Scope This standard specifies the requirements relating to: Steel FE-PM1802 (X5CrNiCu15-5) Consumable electrode remelted Solution treated and precipitation treated Forg
17、ings a or D 200 mm Rm 1 310 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (i
18、ncluding any amendments) applies. EN 2043, Aerospace series Metallic materials General requirements for semi-finished product qualification (excluding forgings and castings). 1)EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards an
19、d their use. EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 5: Specific rules for steels.1) EN 4700-006, Aerospace series Steel and heat resisting alloy Wrought products Technical specification Part 006: Pre-production and production for
20、gings. 1) 1) Published as ASD Prestandard at the date of publication of this standard. BS EN 3469:2009EN 3469:2009 (E) 5 1 Material designation Steel FE-PM1802 (X5CrNiCu15-5) 2 Chemical composition % Element C Si Mn P S Cr Mo Ni Cu Nb + Ta Fe min. 14,0 3,5 2,5 5 C Base max. 0,07 1,00 1,00 0,030 0,01
21、5 15,5 0,50 5,5 4,5 0,45 3 Method of melting Consumable electrode remelted 4.1 Form Forgings 4.2 Method of production Forged from forging stock 4.3 Limit dimension(s) mm a or D 200 5 Technical specification EN 4700-006 6.1 Delivery condition Solution treated Solution treated and precipitation treate
22、d Heat treatment 1 025 C 1 055 C / t 30 min / AC or OQ+ cool to 30 C 1 025 C 1 055 C / t 30 min / AC or OQ + cool to 30 C + 465 C 495 C / t 1 h / AC 6.2 Delivery condition code W U 7 Use condition Solution treated and precipitation treated Delivery condition Heat treatment Delivery condition + 465 C
23、 495 C / t 1 h / AC Characteristics 8.1 Test sample(s) See EN 4700-006. 8.2 Test piece(s) See EN 4700-006. 8.3 Heat treatment Solution treated Use condition 9 Dimensions concerned mm a or D 200 a or D 75 75 a or D 200 10 Thickness of cladding on each face % 11 Direction of test piece L L T 12 T Temp
24、erature C Ambient Ambient Ambient 13 Proof stress Rp0,2 MPa 1 170 1 170 1 170 14 Strength Rm MPa 1 310 1 310 1 310 15 Elongation A % 9 7 5 16 Reduction of area Z % 35 25 15 17 Hardness 363 HB 388 HB 444 388 HB 444 388 HB 444 18 Shear strength Rc MPa 19 Bending k 20 Impact strength 21 C Temperature C
25、 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupture stress R MPa 26 Elongation at rupture A % 27 Notes (see line 98) BS EN 3469:2009EN 3469:2009 (E) 6 34 Grain size See EN 4700-006. 7 G 5 44 External defects See EN 4700-006. 1 Visual 50 Cleanliness/inclusion content See EN 4700-006. (micro-clean
26、ness) 7 Category 4 61 Internal defects See EN 4700-006. 6 a or D 100 mm may be tested either on the product or at an earlier stage of manufacturing. 7 Class 3 82 Batch uniformity See EN 4700-006. 95 Marking inspection See EN 4700-006. 96 Dimensional inspection See EN 4700-006. 98 Notes 99 Typical us
27、e BS EN 3469:2009EN 3469:2009 (E) 7 100 Product qualification See EN 2043. Qualifcation programe to be agred betwen manufacturer and purchaser. BS EN 3469:2009EN 3469:2009 (E) 8 Bibliography EN 3364, Aerospace series Steel FE-PM1802 (X5CrNiCu15-5) Consumable electrode remelted, Softened Forging stoc
28、k a or D 300 mm. BS EN 3469:2009This page has been intentionally left blankBS EN3469:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStand
29、ards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant ai
30、m of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)2
31、0 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer
32、 Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as Britis
33、h Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on
34、 all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits c
35、ontact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI
36、 publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic,
37、 photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email:
