BS EN 3646-006-2006 Aerospace series - Connectors electrical circular bayonet coupling operating temperature 175 ℃ or 200 ℃ continuous - Part 006 Receptacle hermetic jam-nut mounti.pdf

上传人:花仙子 文档编号:550865 上传时间:2018-12-09 格式:PDF 页数:12 大小:455.61KB
下载 相关 举报
BS EN 3646-006-2006 Aerospace series - Connectors electrical circular bayonet coupling operating temperature 175 ℃ or 200 ℃ continuous - Part 006 Receptacle hermetic jam-nut mounti.pdf_第1页
第1页 / 共12页
BS EN 3646-006-2006 Aerospace series - Connectors electrical circular bayonet coupling operating temperature 175 ℃ or 200 ℃ continuous - Part 006 Receptacle hermetic jam-nut mounti.pdf_第2页
第2页 / 共12页
BS EN 3646-006-2006 Aerospace series - Connectors electrical circular bayonet coupling operating temperature 175 ℃ or 200 ℃ continuous - Part 006 Receptacle hermetic jam-nut mounti.pdf_第3页
第3页 / 共12页
BS EN 3646-006-2006 Aerospace series - Connectors electrical circular bayonet coupling operating temperature 175 ℃ or 200 ℃ continuous - Part 006 Receptacle hermetic jam-nut mounti.pdf_第4页
第4页 / 共12页
BS EN 3646-006-2006 Aerospace series - Connectors electrical circular bayonet coupling operating temperature 175 ℃ or 200 ℃ continuous - Part 006 Receptacle hermetic jam-nut mounti.pdf_第5页
第5页 / 共12页
亲,该文档总共12页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58coupling, operating temperature 175 C or 200 C continuous Part 006: Receptacle, hermetic, jam-nut m

2、ounting Product standardThe European Standard EN 3646-006:2006 has the status of a British StandardICS 49.060Aerospace series Connectors, electrical, circular, bayonet BRITISH STANDARDBS EN 3646-006:2006BS EN 3646-006:2006This British Standard was published under the authority of the Standards Polic

3、y and Strategy Committee on 29 September 2006 BSI 2006ISBN 0 580 49191 9Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standa

4、rd cannot confer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3646-006:2006. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology,

5、to Subcommittee ACE/6/-/3, Aerospace Connectors.A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3646-006 May 2006 ICS 49.060 English Version Aerospace series - Connectors, electrical, circular, bayonet

6、coupling, operating temperature 175 C or 200 C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard Srie arospatiale - Connecteurs lectriques circulaires accouplement par baonnettes, temprature dutilisation 175 C ou 200 C continu - Partie 006 : Embase hermtique fixation p

7、ar crou - Norme de produit Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 C oder 200 C konstant - Teil 006: Hermetischer fester Steckverbinder mit Mutternbefestigung - Produktnorm This European Standard was approved by CEN on 3 February 2006. CEN me

8、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

9、tion to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the

10、 same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania

11、, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved w

12、orldwide for CEN national Members. Ref. No. EN 3646-006:2006: EEN 3646-006:2006 (E) 2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.4 4 Required characteristics 4 5 Designation .8 6 Marking 8 7 Technical specification.8 EN 3646-006:2006 (E) 3 Foreword This Eur

13、opean Standard (EN 3646-006:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and

14、the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be

15、 withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regul

16、ations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No

17、rway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3646-006:2006 (E) 4 1 Scope This standard defines the characteristics of hermetic jam-nut mounted receptacles in the family of bayonet coupling circular connectors, intended for use in an opera

18、ting temperature range of 65 C to 175 C or 200 C continuous. It applies to models defined in Table 4. For plugs and protective covers see EN 3646-008 and EN 3646-009 respectively. 2 Normative references The following referenced documents are indispensable for the application of this document. For da

19、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3161, Aerospace UNJ threads General requirements and limit dimensions. EN 3646-001, Aerospace series Connectors, electrical, circular, bayonet

20、 coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification.1)EN 3646-002, Aerospace series Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements. EN 3646-00

21、8, Aerospace series Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous Part 008: Plug Product standard. EN 3646-009, Aerospace series Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous Part 009: Protect

22、ive cover for receptacle Product standard. 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3646-001 apply. 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimensions and tolerances are in millimetres, they apply after surf

23、ace treatment. Interface mating dimensions, see EN 3646-001. 1) Published as AECMA Prestandard at the date of publication of this standard. EN 3646-006:2006 (E) 5 Key 1 Three equally spaced holes diameter 1 min. for locking wire (see option detail P) 2 Polarizing strip optional colour 3 0,13 max. to

24、 end of the flat Figure 1 Hermetic jam-nut mounted receptacle EN 3646-006:2006 (E) 6 Table 1 Round flange receptacle with nut fitting L M N S T U X Y Mass Thread a g Housing size max. min. 0 0,25 max. 0,5 UNJEF-2A max. max. 08 19,48 15,34 13,45 0,5625-24 23,30 20 10 22,66 18,52 16,64 0,6875-24 26,60

25、 26 12 27,41 23,25 20,78 0,8750-20 31,35 35 14 30,61 26,45 23,93 1,0000-20 34,65 46 16 33,76 29,62 27,08 1,1250-18 37,70 51 18 36,96 32,80 30,25 18,34 2,40 4,75 1,57 1,2500-18 40,90 63 20 40,11 37,55 33,43 6,35 1,3750-18 45,65 86 22 43,31 40,75 36,60 23,12 1,57 1,5000-18 48,85 100 24 46,46 43,92 39,

26、78 23,95 3,20 5,56 1,57 1,6250-18 52,00 108 aISO 3161 4.2 Tightening torque of attachment nut See Table 2. Table 2 Housing size Torque N.m 10 % 08 710 1012 12 14 1516 1818 22 20 2522 2724 29 4.3 Panel cut-out Recommended panel cut-out dimensions: see Figure 2 and Table 3. Dimensions and tolerances a

27、re in millimetres. EN 3646-006:2006 (E) 7 Figure 2 Table 3 A D E Housingsize + 0,25 0 min. + 0,25 0 08 14,40 32 13,48 10 17,58 35 16,66 12 22,60 38 20,80 14 25,52 41 23,95 16 28,70 45 27,10 18 31,87 47 30,27 20 35,05 51 33,45 22 38,22 53 36,62 24 41,40 57 39,80 4.4 Material and surface treatment See

28、 Table 4. 4.5 Main general characteristics See EN 3646-002. 4.6 Possible combinations of plugs and receptacles See EN 3646-002. EN 3646-006:2006 (E) 8 5 Designation EXAMPLE Description block CONNECTOR, ELECTRICAL, RECEPTACLE Identity block EN3646Y71006MN Number of this basic standard Model (see Tabl

29、e 4) Hermetic jam-nut mounted receptacle (see EN 3646-002) Housing size and contact arrangement (see EN 3646-002) Type of contact M = male Polarization (see EN 3646-002) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 4 Connectors models

30、Model Description Y Hermetic receptacle with housing (shell) in passivated stainless steel, solder contacts Maximum operating temperature 200 C continuous 6 Marking Unless there are other specific contractual requirements, the marking shall include. 6.1 Marking on the product the manufacturers part

31、number corresponding to the identity block as defined in Clause 5; the date of manufacture (year, week); the manufacturers name or trade mark. 6.2 Marking on the individual packaging the identity block as defined in Clause 5; the corresponding manufacturers part number; the date of manufacture (year

32、, week); the manufacturers name or trade mark. 7 Technical specification See EN 3646-001. blankBS EN BSI389 Chiswick High RoadLondonW4 4AL3646-006:2006BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standar

33、ds in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of ou

34、r products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996

35、7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996

36、9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise request

37、ed.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. C

38、ontact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membersh

39、ip Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright

40、 subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or

41、by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1