BS EN 3745-703-2005 Aerospace series - Fibres and cables optical aircraft use - Test methods - Part 703 Durability of manufacturers marking《航空航天系列 航空器用光纤和光缆 试验方法 第703部分 厂商标记的耐久性》.pdf

上传人:jobexamine331 文档编号:551031 上传时间:2018-12-09 格式:PDF 页数:10 大小:272.88KB
下载 相关 举报
BS EN 3745-703-2005 Aerospace series - Fibres and cables optical aircraft use - Test methods - Part 703 Durability of manufacturers marking《航空航天系列 航空器用光纤和光缆 试验方法 第703部分 厂商标记的耐久性》.pdf_第1页
第1页 / 共10页
BS EN 3745-703-2005 Aerospace series - Fibres and cables optical aircraft use - Test methods - Part 703 Durability of manufacturers marking《航空航天系列 航空器用光纤和光缆 试验方法 第703部分 厂商标记的耐久性》.pdf_第2页
第2页 / 共10页
BS EN 3745-703-2005 Aerospace series - Fibres and cables optical aircraft use - Test methods - Part 703 Durability of manufacturers marking《航空航天系列 航空器用光纤和光缆 试验方法 第703部分 厂商标记的耐久性》.pdf_第3页
第3页 / 共10页
BS EN 3745-703-2005 Aerospace series - Fibres and cables optical aircraft use - Test methods - Part 703 Durability of manufacturers marking《航空航天系列 航空器用光纤和光缆 试验方法 第703部分 厂商标记的耐久性》.pdf_第4页
第4页 / 共10页
BS EN 3745-703-2005 Aerospace series - Fibres and cables optical aircraft use - Test methods - Part 703 Durability of manufacturers marking《航空航天系列 航空器用光纤和光缆 试验方法 第703部分 厂商标记的耐久性》.pdf_第5页
第5页 / 共10页
亲,该文档总共10页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BRITISH STANDARD AEROSPACE SERIESBS EN3745-703:2005Fibres and cables, optical, aircraft use Test methods Part 703: Durability of manufacturers markingThe European Standard EN 3745-703:2005 has the status of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3

2、g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled Copy, (c) BSIBS EN 3745-703:2006This British Standard was published under the authority of th

3、e Standards Policy and Strategy Committee on 30 June 2006 BSI 2006ISBN 0 580 48646 XNational forewordThis British Standard is the official English language version of EN 3745-703:2005. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical an

4、d fibre optic technology, to Subcommittee ACE/6/-/10, Aerospace Fibre optic systems and equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international

5、 or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to in

6、clude all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enq

7、uiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back c

8、over and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISC

9、HE NORMEN 3745-703November 2005ICS 49.060English VersionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 703: Durability of manufacturers markingSrie arospatiale - Fibres et cbles optiques usagearonautique - Mthodes dessais - Partie 703 : Tenue dumarquage fabricantLuf

10、t- und Raumfahrt - Faseroptische Leitungen frLuftfahrzeuge - Prfverfahren - Teil 703: Bestndigkeit derMarkierungen des HerstellersThis European Standard was approved by CEN on 19 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f

11、or giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official v

12、ersions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium,

13、Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROP

14、EN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-703:2005: ELicensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, U

15、ncontrolled Copy, (c) BSI2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Preparation of specimens 4 4 Apparatus 4 5 Method .6 EN 3745-703:2005Licensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled Copy, (c) BSI3 Foreword This European Standard (EN 3745-703:2005) ha

16、s been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member

17、 countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. At

18、tention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations

19、of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia,

20、 Spain, Sweden, Switzerland and the United Kingdom. EN 3745-703:2005Licensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies a method for testing the permanence of the manufacturers marking on finished cables. 2 Normative references The f

21、ollowing referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Elements of electrical

22、and optical connection Test methods Part 100: General EN 3745-100, Aerospace series Fibres and cables, optical, aircraft use Test methods Part 100: General1)EN 3745-201, Aerospace series Fibres and cables, optical, aircraft use Test methods Part 201: Visual examination 3 Preparation of specimens 3.1

23、 The specimen shall be prepared as specified in EN 3745-100. 3.2 The following details shall be specified if not already included in the product standard: type of specimen; number of specimens; length if not 0,75 m; mass value. 4 Apparatus The apparatus (see Figure 1) shall consist of a device desig

24、ned to wear the surface of the identification mark upon the jacket, over a length equal to the travel (10 1) mm at a frequency of (55 5) cycles/min. 1) In preparation at the date of publication of this standard. EN 3745-703:2005Licensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled

25、Copy, (c) BSI5 Dimensions in millimetres Key 1 Counter mass 5 Cable clamp 2 Mechanism 6 Cable on test 3 Mass 7 Travel (10 1) 4 Needle holder 8 Anvil (low thermal mass) Figure 1 EN 3745-703:2005Licensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled Copy, (c) BSI6 5 Method 5.1 Procedu

26、re Secure the specimen on the abrasion test device with the marking on the upper surface. Apply the specified load to the needle holder. Perform the 125 abrasion cycles. 5.2 Final measurements and requirements Examine marking in accordance with EN 3745-201: Visual examination. A continuous line shal

27、l not be scored through the printing which shall remain legible. EN 3745-703:2005Licensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled Copy, (c) BSIblankLicensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled Copy, (c) BSIBS EN 3745-703:2005BSI389 Chiswick High Road

28、LondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or rev

29、ision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform t

30、he Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions

31、 of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to order

32、s for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library a

33、nd its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up t

34、o date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British

35、 Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies

36、. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use

37、, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.Licensed Copy: Wang Bin, na, Wed Aug 23 04:19:27 BST 2006, Uncontrolled Copy, (c) BSI

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1