BS EN 4008-005-2006 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Positioner for crimping tool M22520 2-01 - Produc.pdf

上传人:arrownail386 文档编号:551244 上传时间:2018-12-09 格式:PDF 页数:10 大小:352.70KB
下载 相关 举报
BS EN 4008-005-2006 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Positioner for crimping tool M22520 2-01 - Produc.pdf_第1页
第1页 / 共10页
BS EN 4008-005-2006 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Positioner for crimping tool M22520 2-01 - Produc.pdf_第2页
第2页 / 共10页
BS EN 4008-005-2006 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Positioner for crimping tool M22520 2-01 - Produc.pdf_第3页
第3页 / 共10页
BS EN 4008-005-2006 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Positioner for crimping tool M22520 2-01 - Produc.pdf_第4页
第4页 / 共10页
BS EN 4008-005-2006 Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Positioner for crimping tool M22520 2-01 - Produc.pdf_第5页
第5页 / 共10页
亲,该文档总共10页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58connection Crimping tools and associated accessories Part 005: Positioner for crimping tool M22520/

2、2-01 Product standardThe European Standard EN 4008-005:2006 has the status of a British StandardICS 49.060Aerospace series Elements of electrical and optical BRITISH STANDARDBS EN 4008-005:2006BS EN 4008-005:2006This British Standard was published under the authority of the Standards Policy and Stra

3、tegy Committee on 30 November 2006 BSI 2006ISBN 0 580 49588 4Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot c

4、onfer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 4008-005:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommit

5、tee ACE/6/-/3, Aerospace Connectors.A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 4008-005July 2006ICS 49.060English VersionAerospace series - Elements of electrical and optical connection- Crimping tool

6、s and associated accessories - Part 005:Positioner for crimping tool M22520/2-01 - Product standardSrie arospatiale - Organes de connexion lectrique etoptique - Outils de sertissage et accessoires associs -Partie 005 : Positionneur pour pince sertir M22520/2-01 -Norme de produitLuft- und Raumfahrt -

7、 Elektrische und optischeVerbindungselemente - Crimpwerkzeug und zugehrigesZubehr - Teil 005: Positionierer fr Crimpzange M22520/2-01 - ProduktnormThis European Standard was approved by CEN on 6 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

8、he conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in t

9、hree official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Aus

10、tria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR ST

11、ANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4008-005:2006: E2 Contents Page Foreword3 1 Scope 4

12、2 Normative references 4 3 Terminology .4 4 Required characteristics.4 5 Designation 6 6 Marking .6 7 Technical specification .6 EN 4008-005:20063 Foreword This European Standard (EN 4008-005:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD

13、-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the

14、status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the

15、 subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgiu

16、m, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and the United Kingdom. EN 4008-005:20064 1 Scope T

17、his standard specifies the characteristics for the positioner used with the M22520/2-01 crimping tool to crimp electrical contacts according to EN 4008-002. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only t

18、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 3155-032, Aerospace series Electrical contacts used in ele

19、ments of connection Part 032: Contacts, electrical, coaxial, shielded, size 5, male, type D, crimp, class R Product standard 1)EN 3155-033, Aerospace series Electrical contacts used in elements of connection Part 033: Contacts, electrical, coaxial, shielded, size 5, female, type D, crimp, class R Pr

20、oduct standard1)EN 4008-001, Aerospace series Elements of electrical and optical connection Crimping tools and asso-ciated accessories Part 001: Technical specification EN 4008-002, Aerospace series Elements of electrical and optical connection Crimping tools and asso-ciated accessories Part 002: Li

21、st of product standards MIL C-22520/2, Crimping tools, terminal, hand, wire termination for wire barrel sizes 20 through 28 2)3 Terminology See EN 2591-100. 4 Required characteristics 4.1 Description Securing the positioner on the crimping tool is provided by the combined action of the two bayonets

22、and the pressure from the internal spring on the central moving part (locator). The appropriate longitudinal positioning of the contact with respect to the crimping tool indenters is performed by the contact butting against a shoulder on the central part bore. Locator shall be spring loaded so as to

23、 depress 0,79 mm with a force of (9 4,5) N. 1) In preparation at the date of publication of this standard. 2) Published by: Department of Defence (DOD), the Pentagon, Washington D.C. 20301 USA. EN 4008-005:20065 4.2 Dimensions, mass Dimensions of positioner are given in Figure 1. Mass: 30 g max. Dim

24、ensions and tolerances are given in millimetres. General tolerances: 0,25 mm Key 1 Bayonet lock pin 1,09 0,025 2 Locator in extended position 3 Stamp on this surface EN 4008-013 use with M22520/2 basic tool aUse with contact WIRE XA XG SEL 5 5 EN 3155-032 EN 3155-033 Figure 1 4.3 Material, surface t

25、reatment Positioner body: aluminium alloy, colour blue. Positioner ferrule: stainless steel. EN 4008-005:20066 5 Designation EXAMPLE Description Block Identity block POSITIONER EN4008-005 Number of this standard NOTE If necessary, the code I9005 shall be placed between the description block and the

26、identity block. 6 Marking See Figure 1. 7 Technical specification See EN 4008-001. EN 4008-005:2006blankBS EN BSI389 Chiswick High RoadLondonW4 4AL4008-005:2006BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view o

27、n standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the qual

28、ity of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0

29、)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0

30、)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwis

31、e requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and se

32、rvices. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact

33、 Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.Copyright

34、Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any

35、 form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1