1、BS EN 4126:2010ICS 49.030.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2lubricated Classification: 900 MPa (at ambient
2、temperature) / 315 CLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 28 February2010 BSI 2010ISBN 978 0 580 70531 1Amendments/corrigenda issued sinc
3、e publicationDate CommentsBS EN 4126:2010National forewordThis British Standard is the UK implementation of EN 4126:2010.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee
4、 can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE
5、CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIBS EN 4126:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4126 January 2010 ICS 49.030.30 English Version Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat res
6、isting steel, MoS2lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Srie arospatiale - crous river, freinage interne, flottants, double patte, srie reduite, avec chambrage trs profond, en acier rsistant chaud, lubrifis MoS2- Classification : 900 MPa ( temprature ambiante) / 315 C
7、Luft- und Raumfahrt - Annietmuttern, selbstsichernd, beweglich, beiderseitiger verkrzter Flansch, mit tiefer zylindrischer Aussenkung, aus hochwarmfestem Stahl, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur) / 315 C This European Standard was approved by CEN on 21 November 2009. CEN members
8、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application t
9、o the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the s
10、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
11、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any m
12、eans reserved worldwide for CEN national Members. Ref. No. EN 4126:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIBS EN 4126:2010EN 4126:2010 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Required characteristics .54 Desig
13、nation 75 Marking .86 Technical specification .8Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIBS EN 4126:2010EN 4126:2010 (E) 3 Foreword This document (EN 4126:2010) has been prepared by the Aerospace and Defence Industries Association of Europe -
14、 Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard
15、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that some of the elements of this docum
16、ent may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: A
17、ustria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdo
18、m. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIBS EN 4126:2010EN 4126:2010 (E) 4 1 Scope This standard specifies the characteristics of miniature self-locking two lug, reduced series, incremental counterbored floating anchor nuts, in heat resist
19、ing steel, MoS2lubricated. Classification: 900 MPa1) / 315 C2). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen
20、t (including any amendments) applies. EN 2398, Aerospace series Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) Rm 900 MPa Bars for machined bolts D 25 mm EN 2399, Aerospace series Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) Rm 900 MPa Bars for forged bolts D 25 mm EN 2424, Aerospace series
21、Marking of aerospace products EN 2491, Aerospace series Molybdenum disulphide dry lubricants Coating methods EN 3638, Aerospace series Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) Consumable electrode remelted Solution and precipitation treated Sheet, strip and plate 0,5 mm a 10 mm EN 3639, Aer
22、ospace series Heat resisting alloy FE-PA2601 Softened and cold worked Wire for forged fasteners D 15 mm 900 MPa Rm 1 100 MPa3)EN 3816, Aerospace series Steel FE-PA3601 (X6CrNiTi18-10) Air melted Softened and cold rolled Sheet and strip a 3 mm Rm 800 MPa EN 9100, Quality Management Systems Requiremen
23、ts for Aviation, Space and Defense Organizations EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts TR 3791, Aerospace series Materials for self-locking nuts, threaded inserts and screw thread inserts of temperature classes 425 C4) ISO 5855-2, A
24、erospace MJ threads Part 2: Limit dimensions for bolts and nuts ISO 5858, Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 C Procurement specification ISO 8788, Aerospace Nuts, metric Tolerances of form and position 1) Corresponds to the minimum tensile stre
25、ss which the nut is able to withstand at ambient temperature without breaking or cracking when tested with a bolt of a higher strength class. 2) Maximum temperature that the nut is able to withstand, without permanent alteration to its original characteristics, after ambient temperature has been res
26、tored. The maximum temperature is conditioned by the surface treatment. 3) Published as ASD-STAN Prestandard at the date of publication of this standard. 4) Published as ASD-STAN Technical Report at the date of publication of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/0
27、6/2010 08:07, Uncontrolled Copy, (c) BSIBS EN 4126:2010EN 4126:2010 (E) 5 3 Required characteristics 3.1 Configuration Dimensions Masses See Figure 1 and Table 1. Dimensions and tolerances are expressed in millimetres and apply before MoS2lubrication. Details of form not stated are at the manufactur
28、ers option. 3.2 Tolerances of form and position ISO 8788. 3.3 Materials Threaded element: EN 2398, EN 2399, EN 3638, EN 3639 or TR 3791. Cage: EN 3638 or EN 3816. 3.4 Surface treatment EN 2491, thickness not specified. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontro
29、lled Copy, (c) BSIBS EN 4126:2010EN 4126:2010 (E) 6 These values in micrometres apply before surface treatment. The values do not apply to threads and sheared edges the surface texture of which will be achieved by usualmanufacturing methods. Remove sharp edges 0,1 to 0,4. Key 1 Marking 2 Float inclu
30、sive 3 Cage 4 Threaded element 5 Form out-of-round in this area to achieve self-locking. Tooling marks are permitted in this area. 6 Thread 7 Radius or chamfer Figure 1 6,3 3,2 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIBS EN 4126:2010EN 4126:2
31、010 (E) 7 Table 1 Diameter code Thread aA E F G JbK L M NcP R T Z MassdCounterbore Radialfloat Designation Code min. min. max. max. max. max. nom. min. max. min. 050 MJ50,8-4H6H 04 4 7 14 5,5 7,3 12 19,28,5 0,9 6,5 2,5 4,5 0,5 1,5 06 6 10,5 2,0 08 8 12,5 2,4 10 10 14,5 2,7 060 MJ61-4H5H 04 4 8 16 6,
32、5 8,7 13,5 21,29,4 0,9 7,5 2,5 4,6 0,5 2,0 06 6 11,4 2,4 08 8 13,4 2,8 10 10 15,4 3,2 aIn accordance with ISO 5855-2. In the self-locking zone, the tolerances apply before forming out-of-round. bIs to sharp corners (chamfered) or point of tangency (radiused). cIs applicable at the rivet hole locatio
33、n. dApproximate values (kg/1 000 pieces), calculated on the basis of 7,85 kg/dm3, given for information purposes only. 4 Designation EXAMPLE Description block NUT Identity block EN4126-06008 Number of this standard Diameter code (see Table 1) Counterbore code (see Table 1) NOTE If necessary the orig
34、inator code I9005 shall be placed between the description block and the identity block. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIBS EN 4126:2010EN 4126:2010 (E) 8 5 Marking EN 2424, style N. See Figure 1. 6 Technical specification ISO 5858, e
35、xcept for: Approval of manufacturers: see EN 9100; Qualification of products: see EN 9133. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIBS EN 4126:2010This page has been intentionally left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARD
36、S, 07/06/2010 08:07, Uncontrolled Copy, (c) BSIBS EN4126:2010BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK vie
37、w on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the qual
38、ity of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20
39、8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 89
40、96 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise
41、 requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and servic
42、es. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administra
43、tion. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also hold
44、s the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or
45、otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/06/2010 08:07, Uncontrolled Copy, (c) BSI
