BS EN 4628-2013 Aerospace series Steel X4CrNiMo16-5-1 (1 4418) Air melted Hardened and tempered Bar De 200 mm 1150 MPa Rm 1300 MPa《航空航天系列 FE-PM 3504(X4CrNiMo16-5-1)型钢 空气熔炼 回火和淬火 棒材.pdf
《BS EN 4628-2013 Aerospace series Steel X4CrNiMo16-5-1 (1 4418) Air melted Hardened and tempered Bar De 200 mm 1150 MPa Rm 1300 MPa《航空航天系列 FE-PM 3504(X4CrNiMo16-5-1)型钢 空气熔炼 回火和淬火 棒材.pdf》由会员分享,可在线阅读,更多相关《BS EN 4628-2013 Aerospace series Steel X4CrNiMo16-5-1 (1 4418) Air melted Hardened and tempered Bar De 200 mm 1150 MPa Rm 1300 MPa《航空航天系列 FE-PM 3504(X4CrNiMo16-5-1)型钢 空气熔炼 回火和淬火 棒材.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4628:2013Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Bar De 200 mm 1 150 MPa Rm 1 300 MPaBS EN 4628:2013 BRITISH STANDARDNational forewo
2、rdThis British Standard is the UK implementation of EN 4628:2013. Itsupersedes BS EN 4628:2007 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/61/-/15, Steels for Aerospace Purposes.A list of organizations represented on this committee can beobtaine
3、d on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79247 2ICS 49.025.10Compliance with a B
4、ritish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2013.Amendments issued since publicationDate Text affectedBS EN 4628:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN
5、 4628 February 2013 ICS 49.025.10 Supersedes EN 4628:2007English Version Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De 200 mm - 1 150 MPa Rm 1 300 MPa Srie arospatiale - Acier X4CrNiMo16-5-1 (1.4418) - labor lair - Tremp et revenu - Barres - De 200
6、mm -1 150 MPa Rm 1 300 MPa Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 (1.4418) - Lufterschmolzen - Gehrtet- und angelassen - Stangen - De 200 mm - 1 150 MPa Rm 1 300 MPa This European Standard was approved by CEN on 24 August 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regula
7、tions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member
8、. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN
9、 members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, P
10、ortugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and b
11、y any means reserved worldwide for CEN national Members. Ref. No. EN 4628:2013: EBS EN 4628:2013EN 4628:2013 (E) 2 Contents Page Foreword . 3 Introduction 4 1 Scope 5 2 Normative references . 5 BS EN 4628:2013EN 4628:2013 (E) 3 Foreword This document (EN 4628:2013) has been prepared by the Aerospace
12、 and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to
13、its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at the latest by August 2013. Attention is drawn to the
14、possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4628:2007. According to the CEN/CENELEC Internal Regulations, the national standards
15、 organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb
16、ourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4628:2013EN 4628:2013 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general org
17、anization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-005. BS EN 4628:2013EN 4628:2013 (E) 5 1 Scope This European Standard specifies the requirements relating to: Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Bar De 200 mm 1 15
18、0 MPa Rm 1 300 MPa for aerospace applications. NOTE Other designation: Z 8 CND 17-04. Only the chemical composition of this standard must be considered. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its appl
19、ication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. FprEN 2043, Aerospace series Metallic materials General requirements for semi-finished product qualification (excluding forgings an
20、d castings)1) prEN 2951, Aerospace series Metallic materials Test method Micrographic determination of content of non-metallic inclusions 1)EN 4050-4, Aerospace series Test method for metallic materials Ultrasonic inspection of bars, plates, forging stock and forgings Part 4: Acceptance criteria EN
21、4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use EN 4500-005, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 005: Specific rules for steels EN 4700-002, Aerospace se
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN46282013AEROSPACESERIESSTEELX4CRNIMO165114418AIRMELTEDHARDENEDANDTEMPEREDBARDE200MM1150MPARM1300MPA

链接地址:http://www.mydoc123.com/p-551729.html