BS EN 4800-004-2010 Aerospace series Titanium and titanium alloys Technical specification Wire《航空航天系列 钛和钛合金 技术规范 金属线》.pdf

上传人:figureissue185 文档编号:551884 上传时间:2018-12-09 格式:PDF 页数:32 大小:811.21KB
下载 相关 举报
BS EN 4800-004-2010 Aerospace series Titanium and titanium alloys Technical specification Wire《航空航天系列 钛和钛合金 技术规范 金属线》.pdf_第1页
第1页 / 共32页
BS EN 4800-004-2010 Aerospace series Titanium and titanium alloys Technical specification Wire《航空航天系列 钛和钛合金 技术规范 金属线》.pdf_第2页
第2页 / 共32页
BS EN 4800-004-2010 Aerospace series Titanium and titanium alloys Technical specification Wire《航空航天系列 钛和钛合金 技术规范 金属线》.pdf_第3页
第3页 / 共32页
BS EN 4800-004-2010 Aerospace series Titanium and titanium alloys Technical specification Wire《航空航天系列 钛和钛合金 技术规范 金属线》.pdf_第4页
第4页 / 共32页
BS EN 4800-004-2010 Aerospace series Titanium and titanium alloys Technical specification Wire《航空航天系列 钛和钛合金 技术规范 金属线》.pdf_第5页
第5页 / 共32页
亲,该文档总共32页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4800-004:2010Aerospace series Titanium and titanium alloys Technical specificationPart 004: WireBS EN 4800-004:2010 BRITISH STANDARDNational forewordThis British Standard i

2、s the UK implementation of EN 4800-004:2010.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/61/-/49, Titanium and its Alloys for AerospacePurposes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does no

3、t purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 53322 8ICS 49.025.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theS

4、tandards Policy and Strategy Committee on 30 November 2010.Amendments issued since publicationDate Text affectedBS EN 4800-004:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4800-004 November 2010 ICS 49.025.30 English Version Aerospace series - Titanium and titanium alloys - Technical spe

5、cification - Part 004: Wire Srie arospatiale - Titane et alliages de titane - Spcification technique - Partie 004: Fils Luft- und Raumfahrt - Titan und Titanlegierungen Kneterzeugnisse - Technische Lieferbedingungen - Teil 004: Drhte This European Standard was approved by CEN on 20 February 2010. CE

6、N members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on app

7、lication to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre

8、 has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway

9、, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form an

10、d by any means reserved worldwide for CEN national Members. Ref. No. EN 4800-004:2010: EBS EN 4800-004:2010EN 4800-004:2010 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .64 Wording of order 65 Health and safety .76 Technical requirements 7BS E

11、N 4800-004:2010EN 4800-004:2010 (E) 3 Foreword This document (EN 4800-004:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has rece

12、ived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011,

13、 and conflicting national standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. Acco

14、rding to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, It

15、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 4800-004:2010EN 4800-004:2010 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospace

16、 applications. The general organization of this series is described in EN 4258. BS EN 4800-004:2010EN 4800-004:2010 (E) 5 1 Scope This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy wire. It shall be applied when refer

17、red to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For

18、 undated references, the latest edition of the referenced document (including any amendments) applies. EN 2002-001, Aerospace series Metallic materials Test methods Part 001: Tensile testing at ambient temperatureEN 2002-002, Aerospace series Metallic materials Test methods Part 002: Tensile testing

19、 at elevated temperature EN 2002-005, Aerospace series Test methods for metallic materials Part 005: Uninterrupted creep and stress-rupture testing EN 2002-16, Aerospace series Metallic materials Test methods Part 16: Non-destructive testing Penetrant testing 1)EN 2003-009, Aerospace series Test met

20、hods Titanium and titanium alloys Part 009: Determination of surface contamination EN 2032-1, Aerospace series Metallic materials Part 1: Conventional designation EN 2032-2, Aerospace series Metallic materials Part 2: Coding of metallurgical condition in delivery condition EN 2078, Aerospace series

21、Metallic materials Manufacturing schedule, inspection schedule, inspection and test report Definition, general principles, preparation and approval EN 2955, Aerospace series Recycling of titanium and titanium alloy scrap EN 3238, Aerospace series Metallic materials Test method Shear test for wires a

22、nd rivets EN 3114-001, Aerospace series Test method Microstructure of ( + ) titanium alloy wrought products Part 001: General requirements EN 3114-002, Aerospace series Test method Microstructure of ( + ) titanium alloy wrought products Part 002: Microstructure of bars, sections, forging stock and f

23、orgings EN 3683, Aerospace series Test methods Titanium alloy wrought products Determination of primary content Point count method and line intercept method EN 3684, Aerospace series Test methods Titanium alloy wrought products Determination of transus temperature Metallographic method 1) Published

24、as ASD-STAN Prestandard at the date of publication of this standard. BS EN 4800-004:2010EN 4800-004:2010 (E) 6 EN 3976, Aerospace series Titanium and titanium alloys Test method Chemical analysis for the determination of hydrogen content EN 4258, Aerospace series Metallic materials General organizat

25、ion of standardization Links between types of EN standards and their use EN 4259, Aerospace series Metallic materials Definition of general terms 2)EN 9100, Quality Management Systems Requirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series Quality management systems Qual

26、ification procedure for aerospace standard parts EN ISO 643, Steels Micrographic determination of the apparent grain size (ISO 643:2003) EN ISO 6892-1, Metallic materials Tensile testing Part 1: Method of test at room temperature (ISO 6892-1:2009) prEN ISO 6892-2, Metallic materials Tensile testing

27、Part 2: Method of test at elevated temperature (ISO/DIS 6892-2:2009) ISO 7800, Metallic materials Wire Simple torsion test ISO 7801, Metallic materials Wire Reverse bend test ISO 7802, Metallic materials Wire Wrapping test ISO 9649, Metallic materials Wire Reverse torsion test TR 2410, Aerospace ser

28、ies Metallic materials Relationship between dimensional standards and material standards 3) AMS 2750, Pyrometry 4)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4259 apply. 4 Wording of order The order shall clearly indicate: quantities to be supplie

29、d; dates of delivery; material standard number; 2) Published as ASD-STAN Prestandard at the date of publication of this standard 3) Published as ASD-STAN Technical Report at the date of publication of this standard. 4) Published by: American Society for Testing and Materials (ASTM), 100 Barr Harbor

30、Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA. BS EN 4800-004:2010EN 4800-004:2010 (E) 7 delivery condition and metallurgical code of products; dimensions and tolerances or reference to an appropriate dimensional standard; product designation, when required; forwarding address; nature an

31、d type of packing, if required; definition and frequency of any special tests and their retest procedures, if required. 5 Health and safety Products in the delivery condition shall fulfil the health and safety laws of the area of the country when and where it is to be delivered. A product safety dat

32、a sheet shall be available. 6 Technical requirements 6.1 General The product shall be manufactured in accordance with the requirements of the relevant material standard and the applicable requirements of this specification. A manufacturing schedule shall be established and applied in accordance with

33、 EN 2078. The product shall satisfy the requirements of the material standard and/or order and shall be free from irregularities prejudicial to the subsequent manufacture or use of this product. Notwithstanding previous acceptance complying with this material standard, any product that is found, at

34、a later stage, to contain such defects shall be rejected Unless otherwise specified, the requirements in Tables 1 and 2 shall apply in conjunction with those of the relevant material standard. Table 1 relates to lines 1 to 29 (inclusive) of the material standard and Table 2 relates to lines 30 onwar

35、ds in which the sub-line format is also used. Lines 2 to 98 may also be opened in line 100 if the material standard details specific qualification requirements. If a specific line number is not shown in Tables 1 and 2, the requirement is stated in the material standard and/or order. The requirements

36、 of the order and/or material standard shall over-ride the requirements of the technical specification 6.2 Qualification requirements Qualification requirements when invoked by the material standard and/or order are detailed in Tables 1 and 2. Unless otherwise agreed between the manufacturer and pur

37、chaser the qualification phase shall be run on the first three batches, coming from three different ingots. 6.3 Release requirements 6.3.1 Release tests Release testing shall be the responsibility of the manufacturer. BS EN 4800-004:2010EN 4800-004:2010 (E) 8 The purchaser reserves the right to perf

38、orm any of the inspections and/or tests required by the material standard and/or order. The test samples shall be representative of the product. When required the manufacturer shall inform the purchaser of the planned dates for extraction of samples and release testing in order that these operations

39、 may be witnessed. Tables 1 and 2 detail the requirements for each line of the material standard. Unless otherwise specifically requested by the purchaser, a particular inspection and/or test for release shall be carried out if corresponding acceptance criteria and/or values are stated in the applic

40、able material standard, but see also 6.3.5. 6.3.2 Retests If the test procedure or test piece preparation is faulty, testing shall be re-applied at the original frequency after rectification of the original cause of failure. When failure cannot be attributed to faulty testing, or test piece preparat

41、ion, further test samples shall be selected at twice the original frequency from the product, one of which shall be that on which the original results were obtained unless already withdrawn by the manufacturer after suitable identification of the cause of failure. If all retest results are satisfact

42、ory, the batch shall be accepted. If one or more tests are unsatisfactory, the batch shall be: rejected; or 100 % retested and the conforming products accepted; or partially or fully re-heat treated if heat treatment can rectify the cause of the failure and tested as a completely new batch except fo

43、r chemical composition, for which redetermination of hydrogen content is required. No product or test sample shall be re-heat treated more than twice. 6.3.3 Rejection Any failure to meet the requirements of the material standard shall be cause for rejection. 6.3.4 Special tests Special tests may be

44、required by the purchaser. In such cases, the nature of the test, method, frequency and technical requirements shall be specified on the order or inspection schedule and shall be mutually agreed by the manufacturer and purchaser. 6.3.5 Capability clause Where capability clause is invoked and where s

45、ufficient statistical evidence exists, the test shall not be carried out (unless specifically requested by the purchaser). However, this in no way reduces the obligations of the manufacturer to fulfil the requirements. If subsequent testing indicates that the product does not comply with the require

46、ments, the batch shall be rejected. If sufficient statistical evidence does not exist, the test shall be carried out at a frequency agreed between the manufacturer and the purchaser. 6.3.6 Statistical process control Reduction in the extent of release testing, other than that defined in 6.3.5 above,

47、 may be negotiated with the purchaser on the basis of appropriate statistical process control and/or statistical data. BS EN 4800-004:2010EN 4800-004:2010 (E) 9 6.3.7 Inspection and test report The manufacturer shall furnish, with each delivery, a report conforming to the requirements of EN 2078 sta

48、ting the following: manufacturers name and address and, if appropriate, identification of the plant; order number; material standard number; delivery condition and metallurgical code of the product; quantity and dimensions; manufacturing and inspection schedule reference; cast and batch number; batc

49、h and/or test samples heat treatment condition; results of the tests and retests if any. 6.4 Traceability Each product shall be traceable to the cast, production batch and/or heat treatment batch at all stages of manufacture, testing and delivery. BS EN 4800-004:2010BS EN 4800-004:2010EN 4800-004:2010 (E) 10 Table 1 Technical requirements for lines 1 to 29, where a

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > BS

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1