1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 498:2012Specification for dedicatedliquefied petroleum gasappliances Barbecues foroutdoor use contact grillsincludedBS EN 498:2012 BRITISH STANDARDNational forewordThis Bri
2、tish Standard is the UK implementation of EN 498:2012. Itsupersedes BS EN 498:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/24, Dedicated LPG appliances.A list of organizations represented on this committee can beobtained on request to its se
3、cretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 68628 3ICS 97.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.T
4、his British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedBS EN 498:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 498 January 2012 ICS 97.040.20 Supersedes EN 498:1997English
5、 Version Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included Spcifications pour les appareils fonctionnant exclusivement aux gaz de ptrole liqufis - Barbecues utiliss en plein air y compris grilloirs par contact Festlegungen fr Flssiggas
6、gerte - Grillgerte zur Verwendung im Freien einschlielich Kontaktgrillgerte This European Standard was approved by CEN on 12 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio
7、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A vers
8、ion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, C
9、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION
10、 COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 498:2012: EBS EN 498:2012EN 498:2012 (E) 2 Contents Page Forew
11、ord 5g31 Scope 6g32 Normative references 6g33 Terms and definitions . 7g34 Classification . 12g34.1 Classification of gases used 12g34.2 Classification of appliances . 12g35 Constructional characteristics . 13g35.1 Conversion to different gases 13g35.2 Materials . 13g35.3 Ease of cleaning 14g35.4 St
12、rength 14g35.4.1 General 14g35.4.2 Characteristics of glass panels 14g35.5 Assembly 14g35.6 Stability . 15g35.6.1 Stability of the appliance on a horizontal plane . 15g35.6.2 Stability of the appliance placed on a slope . 15g35.7 Soundness of the gas circuit assembly 15g35.8 Connections . 16g35.9 Lo
13、cking of wheels and castors 16g35.10 Taps. 16g35.10.1 General 16g35.10.2 Taps with marked positions . 17g35.10.3 Taps with variable positions 17g35.11 Control handles . 17g35.11.1 Construction 17g35.11.2 Marking . 17g35.12 Injectors 18g35.13 Ignition devices 18g35.14 Flame supervision devices . 19g3
14、5.15 Burners . 19g35.16 Grid 20g35.17 Turnspits 20g35.18 Appliance incorporating a gas cylinder 20g35.19 Durability of markings . 21g35.20 Auxiliary energy . 21g36 Performance characteristics 21g36.1 Soundness . 21g36.2 Verification of heat inputs. 21g36.2.1 Verification of individual nominal heat i
15、nputs 21g36.2.2 Verification of full heat input 22g36.3 Flame supervision devices . 22g36.4 Safety of operation 22g36.4.1 Ignition, crosslighting . 22g36.4.2 Flame stability 22g36.4.3 Resistance to draught . 22g3BS EN 498:2012EN 498:2012 (E) 3 6.4.4 Resistance to overheating 22g36.5 Temperatures . 2
16、2g36.6 Overheating of the gas cylinder(s) 23g36.7 Combustion 24g36.8 Sooting . 24g37 Test methods . 24g37.1 General . 24g37.1.1 Test gases 24g37.1.2 Test pressures . 25g37.1.3 Test procedures 26g37.2 Verification of the constructional characteristics . 26g37.2.1 Conversion to different gases 26g37.2
17、.2 Materials . 26g37.2.3 Ease of cleaning 26g37.2.4 Strength 27g37.2.5 Assembly 27g37.2.6 Stability of the appliance 27g37.2.7 Soundness of the gas circuit assembly 28g37.2.8 Connections . 28g37.2.9 Locking of wheels and castors 28g37.2.10 Taps 28g37.2.11 Control handles . 28g37.2.12 Injectors 28g37
18、.2.13 Ignition devices . 28g37.2.14 Flame supervision devices . 28g37.2.15 Burners . 28g37.2.16 Grid . 28g37.2.17 Turnspit 29g37.2.18 Appliances incorporating a gas cylinder(s) . 29g37.2.19 Durability of markings 29g37.2.20 Auxiliary energy 29g37.3 Verification of the performance characteristics. 29
19、g37.3.1 Soundness . 29g37.3.2 Verification of the nominal heat input . 29g37.3.3 Flame supervision device . 29g37.3.4 Safety of operation 30g37.3.5 Temperatures . 32g37.3.6 Overheating of the gas cylinder 32g37.3.7 Combustion 33g37.3.8 Sooting . 34g37.3.9 Durability of the marking 34g38 Marking . 34
20、g38.1 Appliance marking 34g38.2 Packaging marking . 35g38.3 Instructions for assembly, use and maintenance 35g3Annex A (normative) National situations . 42g3A.1 General . 42g3A.2 Categories marketed in the various countries and corresponding pressures . 42g3A.3 Types of connection used in various co
21、untries. 44g3A.4 Connection of appliances . 46g3Annex B (normative) Method of calculation of the nominal heat input 48g3B.1 Heat input determination 48g3B.2 Correction formulas for reference conditions 48g3B.3 Use of wet gas meter 49g3B.4 Pressure correction 49g3BS EN 498:2012EN 498:2012 (E) 4 Annex
22、 C (normative) Composition of test gases . 51g3C.1 Gas used . 51g3C.2 Acceptance criteria for test gases . 51g3C.3 Purity . 51g3Annex D (informative) Mandatory sentences . 52g3D.1 English 52g3D.2 French . 52g3D.3 German . 52g3D.4 Italian. 53g3D.5 Polish 53g3D.6 Spanish . 53g3D.7 Dutch . 54g3D.8 Czec
23、h 54g3D.9 Greek . 54g3D.10 Hungarian . 55g3D.11 Portuguese . 55g3D.12 Swedish 55g3D.13 Danish . 56g3D.14 Finnish 56g3D.15 Lithuanian . 56g3D.16 Norwegian 57g3D.17 Slovak . 57g3D.18 Estonian 57g3D.19 Latvian 58g3D.20 Slovenian 58g3D.21 Icelandic . 58g3D.22 Maltese 59g3D.23 Romanian . 59g3Annex ZA (in
24、formative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives . 60g3Bibliography 63g3BS EN 498:2012EN 498:2012 (E) 5 Foreword This document (EN 498:2012) has been prepared by Technical Committee CEN/TC 181 “Dedicated liquefied petroleum gas appli
25、ances”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2013. Atte
26、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 498:1997. This document has been prepared under a mandate give
27、n to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA which is an integral part of this document. The main changes compared to the former version are the fol
28、lowing: approved quick self closing connection used for auxiliary burners are not subjected to the obligation of being manufactory mounted; clearer specifications for lighting and cross lighting when more than one burner are in a same enclosure, use of flash tube; introduction of a logo or warning f
29、orbidding cylinders in places of the appliance not designed for cylinder storage; rewording of the test for checking over heating of gas cylinder compartment; addition of a warning about the updating of information relating to national situations; addition of an annex listing the mandatory sentences
30、 to be written on appliances, packaging and in instructions in the various CEN members countries languages. Items relating to quality assurance systems, production testing and particularly certificates of conformity of auxiliary equipment are not covered by this European Standard. Particular attenti
31、on should be paid to the quality of non metallic materials used in the construction of these appliances. A European Standard specifying requirements for “Rubber materials for seals and diaphragms for gas appliances and equipment“ has been prepared by CEN TC 108 (EN 549). A European Standard for “Fle
32、xible hose, tubing and assembles for use with butane or propane in the vapour phase“ is being prepared. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croati
33、a, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 498:2012EN 498:2
34、012 (E) 6 1 Scope This European Standard specifies the constructional and performance characteristics, safety specifications, relevant test methods and marking of barbecues burning liquefied petroleum gas, referred to in the body of the text as “appliances“. This European Standard covers barbecues a
35、s defined in 3.6 and contact grills as defined in 3.8, used outdoors and operating with the gases indicated in 4.1 according to the categories indicated in 4.2. They are fitted with at least one cooking device. This European Standard applies to these appliances and their functional sections whether
36、or not the latter are independent or incorporated into an assembly. This European Standard also applies to appliances designed to be built-in. This European Standard only applies to type testing. Appliances supplied with third family gas at pressures greater those defined in 4.2 are outside the fiel
37、d of application of this European Standard. During the consideration of this text, it was apparent that the concept of thermal efficiency with regard to appliances such as barbecues was not appropriate. This is because: during cooking, there is an additional transfer of heat due to the meat juices f
38、alling onto the refractories; there is no relation between the item to be cooked and the useful area; the barbecue is an outdoor appliance in which the action of the wind is important in relation to efficiency. In consequence there is no specific requirement covering thermal efficiency for this type
39、 of appliance. This European Standard does not state all applicable requirements for integral equipments of other nature (for example burners covered by EN 484). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, on
40、ly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 125, Flame supervision devices for gas burning appliances Thermoelectric flame supervision devices EN 126, Multifunctional controls for gas burning appliances EN
41、 437:2003+A1:2009, Test gases Test pressures Appliance categories EN 10226-1, Pipe threads where pressure tight joints are made on the threads Part 1: Taper external threads and parallel internal threads Dimensions, tolerances and designation EN 10226-2, Pipe threads where pressure tight joints are
42、made on the threads Part 2: Taper external threads and taper internal threads Dimensions, tolerances and designation BS EN 498:2012EN 498:2012 (E) 7 EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1, modified) EN ISO 228-1, Pipe threads where pr
43、essure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 cooking devices component parts of the appliance designed to hold or receive the food t
44、o be cooked (grids, turnspits, plates, etc.) 3.2 detachable can be dismantled without using a tool 3.3 appliance incorporating a gas cylinder appliance whose body or support includes a compartment for a liquefied petroleum gas cylinder, or a fixing or support device for this cylinder 3.4 built-in ap
45、pliance appliance designed to be built into a brick or similar structure 3.5 auxiliary equipment component and device acting directly or indirectly on the gas rate 3.6 barbecue appliance principally designed to roast and/or grill foodstuffs NOTE Cooking is achieved by the action of radiant heat and,
46、 possibly by convection and/or conduction. 3.7 movable barbecue barbecue fitted with at least one wheel enabling it to be moved easily on the ground 3.8 contact grill, plancha appliance designed to grill foodstuffs by conduction 3.9 locking of an adjuster immobilisation by the manufacturer or by an
47、installer of an adjuster, in its adjustment position by any means (a screw, etc.) 3.10 turnspit cooking device enabling the rotation of the food to be roasted BS EN 498:2012EN 498:2012 (E) 8 NOTE Its rotation can be effected manually or using a mechanical or electrical motor. 3.11 burner component t
48、hat allows the gas to burn NOTE It may be one of two types: non-aerated burner, in which the air for combustion is entrained entirely at the burner outlet; aerated burner, in which part of the air for combustion, termed primary air, is entrained by the gas flow and mixed before the burner outlet; th
49、e remainder of the air, termed secondary air, is drawn in after the burner outlet. 3.12 ignition burner small burner whose flame is designed to light another burner NOTE They are called “pilots“ in this European Standard. 3.13 sooting phenomenon appearing during incomplete combustion and characterized by a deposit of carbon on surfaces in contact with the flame or the products of combustion 3.14 pressure couple combination of two distinct gas distribution pressures applied by reason of the significant difference existing betwee
