1、BSI Standards PublicationBS EN 6059-100:2015Aerospace series Electricalcables, installation Protection sleeves TestmethodsPart 100: GeneralBS EN 6059-100:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 6059-100:2015. It supersedes BS EN 6059-100:2011 which
2、is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all
3、the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 87661 5ICS 49.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Stand
4、ard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6059-100 June 2015 ICS 49.060 Supersedes EN 6059-100:2011English Version
5、 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General Srie arospatiale - Cbles lectriques, installation - Gaines de protection - Mthodes dessais - Partie 100: GnralitsLuft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschluche - Pr
6、fverfahren - Teil 100: Allgemeines This European Standard was approved by CEN on 29 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-t
7、o-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by transla
8、tion under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,
9、 Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C
10、OMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 6059-100:2015 EBS EN 6059-100:2015Contents Page Euro
11、pean foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Test conditions 4 5 Reporting results . 4 6 List of test methods . 5 EN 6059-100:2015 (E)BS EN 6059-100:2015European foreword This document (EN 6059-100:2015) has been prepared by the Aerospace and Defence Industries
12、Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN.
13、 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawn at the latest by December 2015. Attention is drawn to the possibility that som
14、e of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 6059-100:2011. According to the CEN-CENELEC Internal Regulations, the national standards organizations o
15、f the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net
16、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 6059-100:2015 (E)BS EN 6059-100:20151 Scope This European Standard specifies the general test methods and qualification for protection sleeves for cables and cable bundles f
17、or aerospace applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced do
18、cument (including any amendments) applies. EN 3844-1, Aerospace series Flammability of non metallic materials Part 1: Small burner test, vertical Determination of the vertical flame propagation EN 6049-001, Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part
19、 001: Technical specification 1)EN 6059 (all parts), Aerospace series Electrical cables, installation Protection sleeves Test methods 1)3 Terms and definitions For the purpose of this standard, the terms and definitions given in EN 6049-001 apply. 4 Test conditions The tests shall be carried out und
20、er the following atmospheric conditions: Ambient temperature shall be (20 5) C. Relative humidity shall be between 45 % and 75 %. 5 Reporting results The following details shall be reported: Approved drawings. Type and size code. Length of specimen if this not specified in the test method or if ther
21、e is a deviation with respect to the test method. 1) Published as ASD-STAN Prestandard at the date of publication of this standard. http:/www.asd-stan.org/ EN 6059-100:2015 (E)BS EN 6059-100:20156 List of test methods See Table 1 to Table 5 hereafter. Table 1 General tests EN 6059- Title 201 Visual
22、examination 202 Dimensions and mass 203 Coverage Table 2 Environmental tests EN 6059- Title 301 Sun light exposure 302 High temperature exposure 303 Resistance to fluids 304 or EN 3844-1 Flammability 305 Fluid absorption 306 Mould growth 307 Ageing 308 Rapid change of temperature 309 Fire resistance
23、 when fitted on a cable bundle Table 3 Mechanical tests EN 6059- Title 401 Expansion range 402 Bending properties 403 Scrape abrasion 404 Tensile strength 405 Dynamic cut-through 406 Vibration EN 6059-100:2015 (E)BS EN 6059-100:2015Table 4 Electrical tests EN 6059- Title 501 Voltage proof test 502 R
24、esistance to electrical arcs 503 Temperature rise due to rated current injected on the sleeve 504 Temperature rise within a loom due to self-heating when within a protective sleeve Table 5 Fitting tests EN 6059- Title 601 Open and close 602 Marking durability EN 6059-100:2015 (E)This page deliberate
25、ly left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Ins
26、titution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been care
27、fully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find ou
28、t more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard co
29、pies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further info
30、rmation on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standar
31、ds developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your stand
32、ards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With
33、updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your bus
34、iness. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person
35、 or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored i
36、n a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
